Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mini-melodeon building project.  (Read 1346 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Mini-melodeon building project.
« on: October 31, 2011, 04:20:13 PM »

I'm building a small single voice 19/8 DG melodeon using reeds from an old Paolo Soprani PA. The casework is pretty much done at this point. Photos here... I've used quartersawn Mahogany for the wood in the case, maple for bits and pieces of the reed blocks and cedar for the palletboard based on Theo's reviews of some instruments he's worked on with cedar palletboards. Besides, I happened to have some excellent cedar that's been hanging around for the last 25 years, looking for the right project.

Thanks to some advice from Diatonix, I was able to finally start on building my bellows. His facebook photo journal on bellows building really helped quite a bit. I made the cardstock to 25mm fold width. Now to cut down the leather gussets from CGM to fit the smaller corner holes.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Mini-melodeon building project.
« Reply #1 on: October 31, 2011, 04:46:39 PM »

 (:) Very nice work! If it's still possible I'd turn the bass reed block 180 degrees, I may be wrong but it looks as though the bass valves or even the reeds themselves could get entangled in the bellows folds.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Mini-melodeon building project.
« Reply #2 on: October 31, 2011, 09:36:20 PM »

Thanks Diatonix, I'll see if I can do that. I got the bass reed block turned around the wrong way and just couldn't face making another pallet board.

How much distance do you need from the inside of the bellows at a minimum to allow for the bass reeds to sound? I may have enough room, or not, depending on the answer.

Thanks!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Mini-melodeon building project.
« Reply #3 on: October 31, 2011, 10:16:32 PM »

It is really surprising how much swing a big bass reed has. It may be worth installing the reed on the block and sounding them on a tuning rig to see how much clearance you need.

At least one person on Emmanuel Pariselle's latest course has had a problem with bass reeds valves hitting the bellows and getting curled.
« Last Edit: October 31, 2011, 10:23:48 PM by Lester »
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Mini-melodeon building project.
« Reply #4 on: October 31, 2011, 10:20:39 PM »

Thanks Lester, that makes sense. I'll do that.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal