Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Baldoni-Bartoli information  (Read 7088 times)

0 Members and 1 Guest are viewing this topic.

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Baldoni-Bartoli information
« Reply #20 on: January 19, 2012, 02:24:11 PM »

Hi Luke, These old Boston/NYC boxes are really amazing. Didn't you do a thesis yourself on the playing of Joe Derrane and the D/C# style? Anyway regarding the Briggs that would just get us into trouble for thread drift ;)

I sure did...though god knows what conclusions I came to!

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
Re: Baldoni-Bartoli information
« Reply #21 on: February 02, 2012, 05:35:23 PM »

A few internal photos for anyone interested
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Baldoni-Bartoli information
« Reply #22 on: February 02, 2012, 08:10:05 PM »

Definetly Sonola!

It does look very nice, appears to have been well looked after.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Baldoni-Bartoli information
« Reply #23 on: February 03, 2012, 01:06:01 PM »

Interesting how markedly tapered the reed blocks are.
Logged

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
Re: Baldoni-Bartoli information
« Reply #24 on: February 06, 2012, 09:42:11 AM »

Sonola without a doubt Lars!
Waltzman, looking at this box both inside and out has reminded me once again how incredibly well made these boxes were and I agree that the blocks are tapered more so than in any other accordions I have seen from any era. Interesting.. 
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Baldoni-Bartoli information
« Reply #25 on: February 06, 2012, 01:21:41 PM »

Hi all,

I figure that this design *might* be attempting to optimize the relative volumes of the chambers, for best response of the different-sized reeds, and/or for best balance in loudness between low-pitched and high-pitched reeds.  By this time the companies would have the benefit of R & D for the huge postwar boom in piano-accordion manufacturing.  Maybe I should start a new thread for this subject, but the reedblocks are markedly tapered in a fantastic-sounding V. Soprani B/C that I have here:


edited to add:  On reflection, the reedblock tapering in these examples might also serve to economize on wood, to reduce weight, and/or to increase the air capacity inside the bellows!  I confess I don't know which factors are most important, though the two I mentioned first above came to mind the soonest.  Again, it would be the accordion makers who could tell us most reliably.
« Last Edit: February 06, 2012, 08:18:28 PM by pgroff »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Baldoni-Bartoli information
« Reply #26 on: February 07, 2012, 08:10:01 AM »

There is a practical disadvantage of an external taper like this. If the base of the block is parallel sided as is usual, and the top is strongly tapered then the surface that the reedplates mount on is not flat, it has a twist.  As a consequence each reedplate can only make contact with the wood at two opposit corners. Whether this affects the sound it does make waxing slightly less satisfactory, and if extreme might make it impossible to attach the plates with pins or screws on leather. 

I assume this is the reason that many boxes being made now are not tapered on the outside, but achieve the change is chamber volume by tapering the midrib so it is thick for the high pitches and thin for the low pitches.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Baldoni-Bartoli information
« Reply #27 on: February 17, 2012, 06:54:53 PM »

I notice these modern blocks from Gabbanelli via London Accordions have a very similar taper http://www.ebay.co.uk/itm/accordion-reed-set-blocks-gabbanelli-tuned-BC-21-button-8-bas-/330687625818?pt=UK_MusicalInstr_Keyboard_RL&hash=item4cfe84ba5a so its obviously still considered relevant and maybe researchable as its a current maker AtB mory
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal