Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Black Buttons  (Read 3056 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Black Buttons
« on: November 17, 2011, 07:29:17 PM »

I am trying to make a stealth melodeon, my Pokerwork is now sprayed satin black but I would like it to have black buttons as well. So, I can source new white buttons but how can I make them durably black?

Suggestions on a postcard or posted here please.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Black Buttons
« Reply #1 on: November 17, 2011, 07:58:30 PM »

Dino Baffetti might have black buttons, they have plenty of other colours!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Black Buttons
« Reply #2 on: November 17, 2011, 09:14:20 PM »

CGM has these though they're shiny. You could pick up some of these buttons and buff them with some steel wool to take the shine off.
« Last Edit: November 17, 2011, 09:17:43 PM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Black Buttons
« Reply #3 on: November 17, 2011, 11:40:12 PM »

I know I can buy black buttons but I need to fit them to a pokerwork so really need to blackify some pokerwork buttons.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Black Buttons
« Reply #4 on: November 18, 2011, 12:20:56 AM »

Here in the States we have a plastic  dip you can buy at the Hardware store. Depending on how thick the stuff is you might be able to thin it a bit and then dip the buttons. I'd probably rough up the surface of the button before doing so. I think a dip like this is more likely to withstand finger abrasion better than paint or a dye.

Then again, You might just swap out the Pokerwork buttons for these. I'd be willing to bet some heat will remove the original buttons from the keyboard mechanism.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Black Buttons
« Reply #5 on: November 18, 2011, 12:31:57 PM »

The power of Google search.....

http://www.krylon.com/products/fusion_for_plastic/


Worth a try?

Cheers,

Pikey
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Black Buttons
« Reply #6 on: November 18, 2011, 01:46:15 PM »

Permanent marker? For PVC SEM vinyl dye seems to work. Apparently you can even paint PVC with (almost) boiling ritdye, which is the stuff used for tie-dye. Not sure if it works for other types of plastic.
Logged

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Black Buttons
« Reply #7 on: November 18, 2011, 05:15:19 PM »

Have a play around with some black shrink film or some of this newfangled photographic vinyl that they use to sign write vehicles now, it seems pretty thin stuff and if you can get some black dots it might just do the trick.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Black Buttons
« Reply #8 on: November 18, 2011, 05:36:07 PM »

I've just sold a set of (white) buttons to someone who painted the buttons with Hammerite Smooth Finish which left the buttons with a stick feel.

I'd just take the buttons off and replace with black as suggested by Telemorris.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Black Buttons
« Reply #9 on: November 18, 2011, 09:53:53 PM »

I'm sure I've seen black buttons in Loffet's ebay store if you need some
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Bobtheboat

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
  • 'On the cut' near Lichfield, UK
Re: Black Buttons
« Reply #10 on: November 18, 2011, 11:07:18 PM »

I've always thought those abalone (sp?) buttons you see on some posh boxes are really cool. I love the idea of a 'stealth' melodeon Lester, I hope we're going to see some photos when it's done! Bob
Logged
'Rowbotham Erika Extraordinaire' (12 bass + stop G/C/acc), Hohner Liliput Bb-Eb. Castagnari Rik G/C/acc

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Black Buttons
« Reply #11 on: November 19, 2011, 04:50:10 AM »

But you do realize, I hope, that if the entire instrument is well and truly black, none of the sound will be able to escape.

Bob
Logged

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Black Buttons
« Reply #12 on: November 19, 2011, 09:27:53 AM »

With winter coming, shouldn't a stealth melodeon be white?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Black Buttons
« Reply #13 on: November 19, 2011, 09:41:52 AM »

Thanks for all the ideas guys. I will investigate CGM for treble buttons but will probably still have to colour the bass ones as they seem to be pokerwork specific.

Story so far below from eBay wreck to Penguin of Death Special

  • 4th button start
  • G Scale Layout
  • Dedic Tuned
  • Penguin of Death Badge
  • Sprayed Satin Black
  • Penguin of Death Badge
  • All new chrome
  • Adjustable bass strap (not in photo)
  • New bellows straps (not in photo)

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Black Buttons
« Reply #14 on: November 19, 2011, 10:24:11 AM »

Looks to be a nice finish on the main box.
I understand where Lester's coming from. My mountainbike is black -  black forks, frame, stem, seatpost etc. it is a known fact in mountainbike circles that ' a black stealth bike is faster....'
Fact!
 ;)
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Black Buttons
« Reply #15 on: November 19, 2011, 10:25:31 AM »

Let us know how you get on with colouring the buttons, Lester.
I have a similar problem with my Roland FR-18.
The buttons are dark grey but I would like a row of three white buttons across the middle.
Unscrewing the buttons, I find that they are Roland specific with a machine thread, so none of the Italian buttons will fit.
Roland say they have no white buttons so it looks like a paint job.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Black Buttons
« Reply #16 on: November 20, 2011, 08:12:22 PM »

So after suggestions here and help from Google I have settled on Plastikote Super Primer and Matt Black for my first experiment. Picture below from first try with some old buttons, first learning point is to leave then to harden for the 24 hours recommended not 2 hours, so the finish is less good than it was before I fitted the arms  :(

The finish seems firmly fixed but I have fitted 4 bass buttons to the Penguin of Death Pokerwork (c) and will road test it for a week or two before trying the treble end.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Black Buttons
« Reply #17 on: November 21, 2011, 04:49:08 PM »

Very curious to see how well the finish holds up to use.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Black Buttons
« Reply #18 on: November 21, 2011, 06:01:21 PM »

She already looks good to me.  I think you are going to miss those white buttons.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal