Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Melodeon mechanic advice wanted  (Read 2028 times)

0 Members and 1 Guest are viewing this topic.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Melodeon mechanic advice wanted
« on: November 18, 2011, 02:12:20 AM »

A few questions, partly precipitated on my new (anahata-layout) Lilly:

1.  Can I just unscrew the thumb loop without anything (loose nut?) falling off inside the keyboard where I can't get to it?

2.  This is the first box I have with an open, traditional keyboard.  Anything special required to keep it in good shape, aside from keeping it clean, no sloshed brewski's, etc.?  Should the exposed levers be waxed? or silicon sprayed? or ?

3.  Why is bass side bellows glued on?  Looks like there would (almost) have been room to place pins.

4.  Slightly related, how similar (inside mechanicals) are Dino Baffetti/Oakwoods and, say, Tommy's?
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Melodeon mechanic advice wanted
« Reply #1 on: November 18, 2011, 08:20:00 AM »

A few questions, partly precipitated on my new (anahata-layout) Lilly:

1.  Can I just unscrew the thumb loop without anything (loose nut?) falling off inside the keyboard where I can't get to it?

It is held in by a single woodscrew so no debris.

Quote
2.  This is the first box I have with an open, traditional keyboard.  Anything special required to keep it in good shape, aside from keeping it clean, no sloshed brewski's, etc.?  Should the exposed levers be waxed? or silicon sprayed? or ?

Providing it is kept dry, and you live in a normally humid climate don't use anything as it will almost certainly make things worse

Quote
3.  Why is bass side bellows glued on?  Looks like there would (almost) have been room to place pins.

4.  Slightly related, how similar (inside mechanicals) are Dino Baffetti/Oakwoods and, say, Tommy's?

Don't know either of these

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon mechanic advice wanted
« Reply #2 on: November 18, 2011, 08:25:23 AM »

I'm pretty sure the bass side is glued on to save space.   Agreed the pins don't need much room, but with no pins you avoid the need for a separate frame and mating spigot on the left case.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Melodeon mechanic advice wanted
« Reply #3 on: November 18, 2011, 02:03:30 PM »

thanks, gents, appreciate the information.
sounds like the bass side pins are a "saving money" thing, or at least, more simple to manufacture.

re: humidity, what is the optimal %RH for boxes?  i see that many shops have humidifiers.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Melodeon mechanic advice wanted
« Reply #4 on: November 19, 2011, 06:15:59 PM »

I wouldn't disagree with Lester as a generality, there is no need to do anything with the open, wooden levers.  I do have one box, though, which was prone to sticking levers - but I had been playing it outdoors in atrociously damp weather.  After keeping it indoors for a week to dry out, I dissasembled the action and lightly rubbed down the sides amd ends pf the levers to relieve them a little and rubbed them with a candle to make them glide more easily.  This used to be a common treatment for sticking drawers and it certainly seemed to improve the action.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon mechanic advice wanted
« Reply #5 on: November 19, 2011, 06:57:47 PM »

action and lightly rubbed down the sides amd ends pf the levers to relieve them a little and rubbed them with a candle to make them glide more easily.  This used to be a common treatment for sticking drawers and it certainly seemed to improve the action.


Be very careful if rubbing down the sides of the levers to take off the absolute minimum of material.  You just need to remove any fibres that have been raised.  Graphite is another possible safe lubricant.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal