Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Rebuild Bellows Strap  (Read 1754 times)

0 Members and 1 Guest are viewing this topic.

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Rebuild Bellows Strap
« on: November 19, 2011, 04:11:23 PM »

I'm rebuilding my bellows strap and found a strip of what appears to be cardboard glued to the foam on side that is against the leather. In addition the edges of the fabric were adhered to the leather with a seamstick tape but might be a still sticky glue.

I was thinking that I would use the old fabric and foam as a pattern and cut new materials. I'm wondering whether there is a standard way to create the pad on the inside of the strap? Why the cardboard since the fabric is adhered to the leather?

Also, the old fabric is a gold wide wale corduroy. Is this a Gaillard signature or a 90's fabric fashion? I intend to duplicate the brown velvet used on the back straps unless someone points out that every Gaillard has a ridged gold pad.

I'll hand stitch the pad onto the leather, using the existing holes and a thick white polyester thread used in sailmaking.

Any other tips or advice?

Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Rebuild Bellows Strap
« Reply #1 on: November 20, 2011, 01:43:25 PM »

I've decided that brown velvet will do, based on these pictures from Bertrand Gaillard's workshop:

http://www.gaillardaccordions.com/view.php/Atelier-Gaillard-Finitions.jpg?PHPSESSID=4faa30e71c050a54b5bacbafbc31bf36
http://www.gaillardaccordions.com/view.php/Atelier-Gaillard-Essai.jpg?PHPSESSID=4faa30e71c050a54b5bacbafbc31bf36

This doesn't answer the question about whether the fabric I'm replacing was original to the instrument, though I suspect wide-wale gold corduroy would have been possible in the 90's. Today it is hard to find, its textile fashion moment having faded. Twenty years hence, I suppose it will be all the rage.

I found surprisingly few images of Gaillard accordions on YouTube and Google Images and only a couple that showed the bass strap. Go figure.
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Rebuild Bellows Strap
« Reply #2 on: November 21, 2011, 04:55:19 PM »

White thread, what was I thinking? After a couple of stitches, I switched to a heavy brown button thread for the hand sewing. Here are some things I learned, should anyone else wish to rebuild a wrist strap.

  • Ironing the old fabric flat makes it easier to transfer the shape to the new cloth. I used a yellow quilt maker's pencil to draw around the pattern on the wrong side (smooth side) of the velvet.
  • Painting the wrong side of the outline with a dilute solution of Elmers Glue and cutting after the glue line dried kept the raw edge from fraying.
  • Shaping the fabric around the pad involves making many little tucks. The cardboard strip facilitated stabilizing the tucks. I used a dot of hot gun glue between the tuck and the cardboard. If it didn't look right, a touch with a hot iron let me re-position the tuck. When I was satisfied with the shape, I used a hot iron to press the tucks flat, protecting the fabric with paper.
  • The big four tucks (darts) on the strap side of the pad are visible. I redid them several times before they looked symmetrical. Having used hot glue paid off here.
  • When I hand-stitched the first long leather edge I was careful to center the foam pad. However drawing the thread tight shifted the pad's unsewn edge toward the center by 3 mm so the pad ended up off center. Perhaps this is why the original maker used seamstick tape to center the pad on the leather, to prevent its creeping.
  • It was difficult to hit the leather's existing needle holes when the stitch started on the cloth side of the pad. I eventually hit on pushing the needle partially through from the leather side, pulling the needle out and reinserting it in the resulting hole in the foam.
  • A sailmaker's palm would have made the needle work considerably easier. Mine was somewhere else and I missed its ability to shove a needle.

The original strap was machine sewn so there was a stitch between each hole whereas hand sewing results in alternating stitches. To duplicate the original look would have required a second round of stitches. I left this project for some lazy afternoon at anchor, palm in hand.

« Last Edit: November 21, 2011, 04:58:17 PM by docEdock »
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Rebuild Bellows Strap
« Reply #3 on: November 21, 2011, 05:05:05 PM »

The original strap was machine sewn so there was a stitch between each hole whereas hand sewing results in alternating stitches. To duplicate the original look would have required a second round of stitches. I left this project for some lazy afternoon at anchor, palm in hand.

Might have been easier to have used Saddle Stitch, this would have allowed you to work each hole from the leather side first showing where to come back through from the other side. I would also have waxed the thread and needles to ease their passage through the various layers.

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Rebuild Bellows Strap
« Reply #4 on: November 21, 2011, 07:16:21 PM »

Might have been easier to have used Saddle Stitch, this would have allowed you to work each hole from the leather side first showing where to come back through from the other side. I would also have waxed the thread and needles to ease their passage through the various layers.

Saddle stitch would have been a better choice. Plus I suspect it halves the length of thread to pull through. And waxing, well yes, of course. Thanks.

Had it been handy I would have used my Speedy Stitcher Sewing Awl http://www.speedystitcher.com/products.html but it was with the palm. Next time . . .
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal