Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Source for Hohner Parts in USA  (Read 2035 times)

0 Members and 1 Guest are viewing this topic.

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Source for Hohner Parts in USA
« on: November 21, 2011, 07:23:43 PM »

Are there sources on this side of the pond (other than The Button Box and Hohnerusa.com) for Pokerwork plastic valves? What about precut leather valves or sheet leather for cutting valves?

Doc
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Source for Hohner Parts in USA
« Reply #1 on: November 22, 2011, 12:21:40 AM »

House of Musical Traditions shows some leather assortments, but I see no plastic. Might be worth checking. As for making your own leather, I've heard that the material must be cured or treated (or whatever it's called) in a special way that will leave no residual corrosive salts in the leather. I  use plastic or synthetic, so my knowledge of this is very much less than many others here, and I'm sure someone will chime in on that one.

There's also a fellow in Canada who stocks ample supplies of a great variety of bits....Frank Romano, at FRM Enterprises, I think it's called.

Hope this helps.

Bob

Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Source for Hohner Parts in USA
« Reply #2 on: November 22, 2011, 12:50:57 AM »

Pretty sure Frank only sells to dealers or builders.

nathanfisher

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Source for Hohner Parts in USA
« Reply #3 on: November 22, 2011, 01:48:29 AM »

Here is  someone on E-bay that sells leather valves and other accordion parts!

http://stores.ebay.com/Rainier-goods/Accordion-parts-/_i.html?_fsub=2981258018&_sid=203444408&_trksid=p4634.c0.m322
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Source for Hohner Parts in USA
« Reply #4 on: November 22, 2011, 03:20:58 AM »

Here is  someone on E-bay that sells leather valves and other accordion parts!

http://stores.ebay.com/Rainier-goods/Accordion-parts-/_i.html?_fsub=2981258018&_sid=203444408&_trksid=p4634.c0.m322

I have used this seller's valves in my recent Supertone rebuild.....they seem to be of  very good quality.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Source for Hohner Parts in USA
« Reply #5 on: November 22, 2011, 07:33:20 AM »

Charlie Marshall  will send stuff to the USA I think.  Valves are very light and cost little to send by post.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Source for Hohner Parts in USA
« Reply #6 on: November 22, 2011, 01:20:37 PM »

I have purchased from Frank Romano on two occasions -- once some bellows, another time some valves & gasket & such. I was left with the notion, however, that it was something of an inconvenience for him to sell tiny amounts to hobiests.

All of my dealings with Charlie at CGM have been exemplary. He's been most helpful, and I've been somewhat surprised at how quickly and inexpensively my things have arrived from Scotland to the U.S.

Bob
Logged

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Source for Hohner Parts in USA
« Reply #7 on: November 24, 2011, 12:26:14 AM »

Thanks for the information.

In a phone call to The Button Box I learned that they sell the plastic valves in single quantities. They suggested using the Hohner catalog to determine how many of which size plastic valves I need. For leather valves they referred me to Frank Romano but it seems that Charlie Marshall may be a better fit for my leather needs.
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal