Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Broken Spring  (Read 5535 times)

0 Members and 1 Guest are viewing this topic.

Badger

  • Member
  • *
  • Offline Offline
  • Posts: 22
  • success is achieved by patience and perseverence
Broken Spring
« on: November 23, 2011, 01:35:57 PM »

I own a Hohner Pokerwork approximately 2 years old.  Whilst playing yesterday, the spring for the G/A on the G row has broken.  I live in the Southampton area, and would appreciate if any one can assist as to where I can get the instrument repaired, preferably local, and what the cost is likely to be.  Thanking readers in anticipation.  :-\
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Broken Spring
« Reply #1 on: November 23, 2011, 01:59:41 PM »

You could try doing it for yourself. It's not too difficult. See this thread and subsequent replies.
http://forum.melodeon.net/index.php/topic,1101.msg103045.html#msg103045

You will need a Hohner spring, available from Theo
http://www.theboxplace.co.uk/

or Charlie Marshall.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Springs.html#7

As it is on the inside G-row you will need a spring made from 0.5 mm dia wire (the outside row springs are 0.55 mm dia as they need to be a fraction stronger)

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Broken Spring
« Reply #2 on: November 23, 2011, 02:28:21 PM »

broken spring? over here winter hasnt even started yet ::)
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Broken Spring
« Reply #3 on: November 25, 2011, 10:50:30 AM »

You might find one of the local morris musos can fix it for you, or you can give me a call.  I live in Basingstoke but am often in Southampton (the petrol's cheaper there).  I've sent a PM with my phone numbers.

Rob.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Broken Spring
« Reply #4 on: November 25, 2011, 06:35:35 PM »

  I live in Basingstoke but am often in Southampton (the petrol's cheaper there). 
Rob.

Sufficiently cheaper to make it worth burning the extra fuel to get there and back? ;D
(I know someone here in Cyprus who drives from a village near Limassol to Larnaca and back - a round trip of about 100 miles - to save €1.85 on a tray of 24 tins of catfood....)

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Broken Spring
« Reply #5 on: November 27, 2011, 11:23:07 AM »

I may be daft, but not that daft...  No, my boat is in Southampton - well, Hamble.  I could always drop in to show how to do the repair and still go and get frozen and wet on the boat.

Rob.
Logged

Badger

  • Member
  • *
  • Offline Offline
  • Posts: 22
  • success is achieved by patience and perseverence
Re: Broken Spring
« Reply #6 on: November 29, 2011, 09:09:24 PM »

Thanks to all of you who replied.  I purchased a spring and followed the instructions. With a dose of patience: Success, spring replaced and box now working perfectly.  What a terrific resource Melnet is. ;D
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Broken Spring
« Reply #7 on: November 30, 2011, 01:16:33 PM »

Glad to hear you got it fixed OK.  It's a great sense of achievement doing your first one.  My Pokerwork (Chinese) broke three in quick succession early on, but has been fine ever since.  I find the only real difficulty is to find the two sizes of screwdriver to fit really well and a crochet hook to save one's fingertips when detaching the springs.  I also have an old woooden breadboard that I screw the action to whilst working on it.

Have fun.

Rob.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Broken Spring
« Reply #8 on: November 30, 2011, 01:20:09 PM »

I also have an old woooden breadboard that I screw the action to whilst working on it.

That is an excellent plan - the  last thing you need is the action jumping about all over the place while you're trying to do things to it, and little parts absenting themselves without trace.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Earbrass

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 193
  • May cause drowsiness
Re: Broken Spring
« Reply #9 on: December 07, 2011, 10:23:51 AM »

I think I've broken a spring on the bass side of my pokerwork - the C chord button is loose, and the C chord sounds all the time. I've never had it open before, and am not particularly good with fiddly stuff. Is this harder/easier to fix than a treble spring? Any advice /guidance appreciated.
Logged
ilmatyynyalukseni on täynnä ankeriaita

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken Spring
« Reply #10 on: December 07, 2011, 10:37:00 AM »

It is the same process as for a treble spring, though it is more difficult to get the mechanism out - you either have to remove the buttons from the ends of the pushrods, or remove the small pin that holds the pushrods to the mechanism.

Depending on which spring it is you can sometimes withdraw the axle far enough without taking the mechanism out.



Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Earbrass

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 193
  • May cause drowsiness
Re: Broken Spring
« Reply #11 on: December 07, 2011, 10:40:41 AM »

Thanks Theo.
Logged
ilmatyynyalukseni on täynnä ankeriaita

Earbrass

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 193
  • May cause drowsiness
Re: Broken Spring
« Reply #12 on: December 09, 2011, 04:53:58 PM »

It is the same process as for a treble spring, though it is more difficult to get the mechanism out - you either have to remove the buttons from the ends of the pushrods, or remove the small pin that holds the pushrods to the mechanism.

Depending on which spring it is you can sometimes withdraw the axle far enough without taking the mechanism out.

Well - a partial success. I dropped into Emilio Allodi's shop and he supplied me with a spring. He also suggested that instead of removing the mechanism completely, one could unscrew it and move it to an easier position to work on without removing the bass buttons - just poke the rods further out through the holes. In the end I found I didn't even need to do this - I was able to replace the spring with the mechanism in place. However, when re-attaching the springs I realised that the spring I had been given is quite different in strength to the others - much weaker, although thicker wire. It all works OK, but the 'C' chord button is now noticeably less springy, and makes more of a "clack". So at some point I will have to get the proper spring and do it all again.  :-[

Still, pleased to have tackled it myself - I will be a little more confident next time, hopefully.
Logged
ilmatyynyalukseni on täynnä ankeriaita

Pequod

  • Member
  • *
  • Offline Offline
  • Posts: 29
Re: Broken Spring
« Reply #13 on: July 22, 2016, 10:03:22 AM »

Hello all,

I decided I will try to fix by myself a broken spring on my Pokerwork.

But first of all I will need the Spring  (:)

Does the pokerwork requires a special Spring; if yes what is the model and where can I find it?

http://www.cgmmusical.co.uk/CGM_Musical_Services/Springs.html#7 - is this one ok? there are other vendors? Probably I will need to buy it in the UK and ship to Portugal...

Thank you in advance.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken Spring
« Reply #14 on: July 22, 2016, 10:07:38 AM »

There are several varieties of the spring used on pokerworks.  They are all the same shape, but the thickness of the wire can be different.   On the treble side there are two different thickness,  For the outside row, which have longer levers the thickness is usually 0.55mm, for the inside row with shorter levers the thickness is 0.5mm.  Tell your supplier which thickness you want.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pequod

  • Member
  • *
  • Offline Offline
  • Posts: 29
Re: Broken Spring
« Reply #15 on: August 17, 2016, 11:37:53 AM »

Thank you for the information.

I don't have the springs yet, but already tried do get to the broken Spring, and I'm having lots of trouble to pull the axle rod!

I didn't screw the mechanism to a piece of board yet, but it seems that even when I will do that, it will be very hard to pull the rod with a plier from the opposite side, because the rod is very tight (I already released all the springs).

Please let me know if there are any tricks doing this work, or if just a matter of strengh.

Thank you!
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Broken Spring
« Reply #16 on: August 17, 2016, 11:29:01 PM »

Put the axle rod in the chuck of a cordless drill then draw the axle out at a low revs. Follow through with another rod to keep everything in place.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pequod

  • Member
  • *
  • Offline Offline
  • Posts: 29
Re: Broken Spring
« Reply #17 on: August 18, 2016, 09:16:40 AM »

I also read in another post about using the drill, I will try that. Thank you Rees.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Broken Spring
« Reply #18 on: August 18, 2016, 12:54:21 PM »

Remember to release all the spring ends from the levers before trying to withdraw the axle.

Also, read the older posts on this thread - there is some good information contained in the links which are mentioned.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Pequod

  • Member
  • *
  • Offline Offline
  • Posts: 29
Re: Broken Spring
« Reply #19 on: August 24, 2016, 12:37:15 PM »

Thank you for all the information.

With the help of a good plier first, and then a drill chuck well tight, I could remove the axle very easily, and so it was easy to remove the broken Spring and replace with a new one. So the treble mechanism is now ready for playing.

But then I had this problem: it is very hard to screw the treble mechanism in it's place (4 screws), because the mechanism is far from the screw holes. Do you think I need to unhook the springs to do this? (because I already hooked the springs with the loose treble mechanism...)
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal