Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Gasket Goo?  (Read 3636 times)

0 Members and 1 Guest are viewing this topic.

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Gasket Goo?
« on: September 02, 2008, 08:53:25 PM »

I have recently acquired an old single row Pokerwork on "C" as winter entertainment (hence the low price I was charged!). There are a large number of things to fix, but amongst them is that the bass end gasket needs replacing. I have bought the replacement gasket, as recommended by George (to whom be thanks!) - ie a roll of draught excluder, and am poised to install this. To avoid re-inventing circular load movers, what should I use to remove the existing gasket please? It seems to be a continuous strip of something stuck on - but with what? Can anyone help please?
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Gasket Goo?
« Reply #1 on: September 03, 2008, 01:21:19 AM »

Sounds like a job for a craft knife. Hold it at 30/45 degrees and scrape towards you gently. If that doesn't work go back and try a slightly steeper angle. If that doesn't work it's time to consult a professional!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Gasket Goo?
« Reply #2 on: September 03, 2008, 08:03:34 AM »

Of course my reply was a little like thinking out loud and wasn't really very well explained! First of all remove the bulk of the gasket by simply pulling it away, the gasket and glue remnants can then be scraped off. The angled blade of the craft knife should face away from you so you are in effect 'dragging' it towards you; in some instances you might tilt the blade towards you and use it with a pushing motion in the same way you would use a cabinet scraper.

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Gasket Goo?
« Reply #3 on: September 03, 2008, 04:38:32 PM »

For that kind of work I sometimes use a wooden scraper made from a thin flat piece of hardwood, about 1/4-in to 1/2-in wide. Popsicle sticks work if you cut and shape one end to use as a scraper.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Gasket Goo?
« Reply #4 on: September 03, 2008, 10:41:03 PM »

Thanks guys, this is the technique I'd been thinking on.

 1:Do any of you have any idea on what solvents to avoid for removing the original sticky, or can I safely do without useing this sort of thing? (Sorry to seem so dim  :'( )

 2:I've now found that the bellows end is split open by the nail (yes - a real pointed end thingy) which was supposed to be holding the bass end to it (hence the air leak I had found - the bellows end was not firmly fixed to the bass). I propose to glue the split solid, but drill another hole further down for the pin - is there anything wrong in doing this?

Thanks in advance,

Chris
« Last Edit: September 04, 2008, 04:55:01 PM by Ebor_fiddler »
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Gasket Goo?
« Reply #5 on: September 05, 2008, 08:24:40 PM »

Thanks guys, this is the technique I'd been thinking on.

 1:Do any of you have any idea on what solvents to avoid for removing the original sticky, or can I safely do without useing this sort of thing? (Sorry to seem so dim  :'( )

Run a sharp knife under the gasket to remove the bulk, then remove as much as possible by scraping. My preferred scraping tool is a sharp wood chisel held at about 90º to the surface.  This often removes everything.  If anything sticky is left I find the safest solvent is cigarette lighter fuel.  Safest in terms of not damaging the finish, its obviously highly inflammable.

Quote

 2:I've now found that the bellows end is split open by the nail (yes - a real pointed end thingy) which was supposed to be holding the bass end to it (hence the air leak I had found - the bellows end was not firmly fixed to the bass). I propose to glue the split solid, but drill another hole further down for the pin - is there anything wrong in doing this?

You will be left with an extra hole which won't look great.  You might get away with gluing the wood then re-drilling the original hole.  If you go for a new hole, actually two holes - one in the bellows frame one in the box, then drill the side of the box first.  Next place a spacer of about half the thickness of the new gasket in the position where the gasket will go, then use the outer hole as a guide to drill into the bellows frame.  That should ensure the gasket is compressed when it all goes together.

While on the subject of gasket, you should really use the proper stuff rather than draught strip.  I have yards of it, contact me off-forum.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal