Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Unusually quiet Hohner  (Read 5903 times)

0 Members and 1 Guest are viewing this topic.

student I

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Unusually quiet Hohner
« Reply #20 on: December 07, 2011, 01:38:36 AM »

Right at this moment - when the kids are tucked up in bed - to have a quiet melodeon - would be a godsend  (:)
iPad with headphones? streb? Lilliput? silence is good too. I 'nursed' mine to sleep playing Shand tunes on a Corona 111. Go for loud 'til everyone gets used to it.
Not easy, good luck.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Unusually quiet Hohner
« Reply #21 on: December 07, 2011, 05:58:30 AM »

Thanks for that technical info, Theo; I'm relieved to know that it's not something I need to re-do or adjust and that it's SUPPOSED to sound like that! Now I can just relax and enjoy playing it.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Unusually quiet Hohner
« Reply #22 on: December 07, 2011, 07:09:00 AM »

Interesting, I've just done some measuring.
 
2915club 2
11.910.5vent hole diameter
2019.5reed spacing centre to centre
13.813.8 internal width of reed chamber
6.25.7 thickness of reed chamber wall
111.2mm286.5mm2area of vent hole

So the significant difference seems to be the size of the vent. The difference between 10.5 and 11.9 doesn't sound a lot but it is the area of the hole for the 2915(pokerwork) is 28% larger than the club.

As the internal width of the reed chamber is the same on both instruments, would it be feasible to enlarge the vent diameter on the Club 2 to bring it to the same dimensions as the Pokerwork? But perhaps that would have knock-on effects: too much air getting to the reeds causing possible choking?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusually quiet Hohner
« Reply #23 on: December 07, 2011, 08:02:17 AM »


As the internal width of the reed chamber is the same on both instruments, would it be feasible to enlarge the vent diameter on the Club 2 to bring it to the same dimensions as the Pokerwork? But perhaps that would have knock-on effects: too much air getting to the reeds causing possible choking?

My thoughts exactly Steve.   I've even started planning how to make a special reamer for enlarging the holes!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Unusually quiet Hohner
« Reply #24 on: December 07, 2011, 10:39:32 AM »

It's amazing the effect hole size has on the volume, and tone. On my very first accordion I made with 3/8" (9.525mm) round holes, it sounded muffled.  I gradually enlarged the holes using a set of drill bits with small graduations.  Since it had slides, I didn't go far, but each small change brought a very noticeable difference in sound.  Other option if slides prevent enlarging round holes, is squaring them off, which I've just done on the same accordion, but haven't gotten it back together to see the difference.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Unusually quiet Hohner
« Reply #25 on: December 07, 2011, 06:04:42 PM »

Is the Erika club the same as the Club II in this respect?
« Last Edit: December 08, 2011, 12:48:00 AM by waltzman »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusually quiet Hohner
« Reply #26 on: December 08, 2011, 08:00:44 AM »

Is the Erika club the same as the Club II in this respect?

Yes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JD

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 235
Re: Unusually quiet Hohner
« Reply #27 on: December 09, 2011, 07:53:21 PM »


As the internal width of the reed chamber is the same on both instruments, would it be feasible to enlarge the vent diameter on the Club 2 to bring it to the same dimensions as the Pokerwork? But perhaps that would have knock-on effects: too much air getting to the reeds causing possible choking?

What about the opposite effect? If you have a reed that occasionally chokes could it be cured by reducing the size of the vent hole, perhaps with a paper gasket? (I did think of a tapered wooden collet to reduce the hole diameter but that's well beyond my woodworking abilities).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusually quiet Hohner
« Reply #28 on: December 09, 2011, 08:02:54 PM »


As the internal width of the reed chamber is the same on both instruments, would it be feasible to enlarge the vent diameter on the Club 2 to bring it to the same dimensions as the Pokerwork? But perhaps that would have knock-on effects: too much air getting to the reeds causing possible choking?

What about the opposite effect? If you have a reed that occasionally chokes could it be cured by reducing the size of the vent hole, perhaps with a paper gasket? (I did think of a tapered wooden collet to reduce the hole diameter but that's well beyond my woodworking abilities).


Usually a reed that chokes does so because it is not correctly set.  The exception is the very highest reeds which are more prone to choke because of their size, this is one reason why you sometimes see a small hole punched through the wax beside the top one or two reeds, it allows a bleed of air which reduces the pressure difference across the reed and lessens the chance of choking.  Having no valves also helps because it allows a bleed of air through the silent reed.

By chance I noticed different sized vents on the reedblocks of a Ranco accordion I did some work on recently. The top three reeds on each bank had 10mm vents while the rest all had vents of about 11.5mm.   Ranco were one of the very best Italian factories, so I'm confident they knew what they were doing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Unusually quiet Hohner
« Reply #29 on: December 09, 2011, 08:53:49 PM »

My Erika club does not seem to be quiet at all.  I guess 'loudness' can be a very subjective thing.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal