Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows corners conundrum  (Read 1770 times)

0 Members and 1 Guest are viewing this topic.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Bellows corners conundrum
« on: November 24, 2011, 02:44:24 PM »

I'm gritting my teeth and preparing to make new bellows for my Koch presswood and all the stuff arrived from CGM today.

Everything seems to be fine and raised no questions apart from the metal corners. They don't sit anywhere near squarely on the cardboard, (the angle is probably closer to 100 than 90 degrees), and give the choice of either sitting flush on one edge and standing proud by 5-6mm on the other or a 2.5-3mm gap on each side.

I ordered the card and everything else at the same time and gave the finished dimensions as well and I can't imagine Charlie knowingly sending incorrect corners so am I just being thick and missing something?, (will they fold inwards when pressed, etc?.).

Any insights greatly appreciated.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Bellows corners conundrum
« Reply #1 on: November 24, 2011, 05:02:42 PM »

Experimenting on the knackered original bellows, I can get the corners, (round Italian-style ones, not the square Hohner type), to seat properly by chamfering the corners of the cardboard. The rest of the cloth and the leather corner gussets still hold everything together and once the corner goes on with glue and another layer of cloth then it should be airtight. The bellows should function normally but this strikes me as a rather dubious and highly questionable method and it can't possibly be the proper way to do it...
« Last Edit: November 24, 2011, 10:32:54 PM by Andy Simpson »
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bellows corners conundrum
« Reply #2 on: November 24, 2011, 07:28:10 PM »

If you have no joy bring them round one day next week and I'll have a look at them.   :-\

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Bellows corners conundrum
« Reply #3 on: November 25, 2011, 12:29:20 AM »

The more I think about it, the more I think it must be the only way but it still seems wrong somehow.

Snipping the point off the cardboard is the only way the corner will actually fit on, the shape of the inside simply can't mate properly with a 90 degree edge and if the angle is going to change when they're flattened by being pressed it'll be to a more obtuse angle if it's done too hard or with uneven pressure, causing them to splay outwards. It only leaves a tiny hole that's easily re-covered and the structural effect is negligible, especially once the corner is crimped on.

Every Italian box I've seen has bellows corners that are similarly rounded and there's no way they'd fit on bellows with perfect 90 degree corners. Once you have eliminated the impossible, whatever remains, however improbable....
Logged

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Bellows corners conundrum
« Reply #4 on: November 25, 2011, 02:22:29 PM »

Looking at my Sonola which has rounded bellows corners, one of which is missing the metal, the corner is chamfered off. There also appears to be linnen or similar fabric glued over the corner all the way round to keep the edges firmly together.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Bellows corners conundrum
« Reply #5 on: November 28, 2011, 04:26:15 PM »

Thank you!, that's really put my mind at rest.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal