Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: air leaking round the bellows pins on a liliput  (Read 2644 times)

0 Members and 1 Guest are viewing this topic.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
air leaking round the bellows pins on a liliput
« on: December 13, 2011, 02:21:30 PM »

My Liliput leaks through the bellows pins (all of them), it was originally converted by Theo, and he has indicated that it can be fixed using super glue, but I am not clear exactly how (my memory is not what it was).

I thought I would ask the panel what ideas they have (and I hope Theo will jump in as well).

Not sure it has been discussed before.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: air leaking round the bellows pins on a liliput
« Reply #1 on: December 13, 2011, 02:39:43 PM »

The superglue method is not for the faint hearted, but I have done this successfully on, I think,  three different instruments.

You will need some new unused bellows pins and standard superglue.  If the the holes are seriously enlarged the some fine wood dust may be useful.  Usually the wear is concentrated in the case of the instrument,  the holes in the bellows frames seem to be less prone to wear.

Method:
Separate the bellows from the ends, place a shiny new bellows pin in the hole, fill the space round the pin with superglue.  If the hole is large sprinkle fine wood dust on the glue.  This helps to speed up the setting of the glue and prevent it running out of the hole. Add more glue if necessary so there are no gaps around the pin. Repeat for the other pins.
Now set the whole job aside overnight so that the glue is completely hardened all the way through.
Once the glue is solid use a pair of pliers to take a firm grip on a pin and give it a sharp twist.  It should break away cleanly from the glue and can be withdrawn from the hole.  Repeat for all the pins.  Clean up surplus glue and re-assemble.
If you try this remember it is a somewhat risky procedure, especially on the very thin walls of a Liliput. You might want to practice on some scrap material first.

If you decide to try then you take full responsibility for your work.  And as M Pariselle says:  "Good Luck!"
« Last Edit: December 13, 2011, 02:42:35 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: air leaking round the bellows pins on a liliput
« Reply #2 on: December 13, 2011, 02:56:22 PM »

thanks Theo, that is very comprehensive.  I'll give it a go.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: air leaking round the bellows pins on a liliput
« Reply #3 on: December 13, 2011, 03:08:41 PM »

You could also try and get the pins that are slightly thicker (2,7 instead of the more common 2,4 mm, if the latter have been used in your Liliput). I get mine through Carini ("chiodi per mantice maggiorati"), so maybe other accordion technicians near you may have them as well.
Logged

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: air leaking round the bellows pins on a liliput
« Reply #4 on: December 13, 2011, 03:41:16 PM »

You could also try and get the pins that are slightly thicker (2,7 instead of the more common 2,4 mm, if the latter have been used in your Liliput). I get mine through Carini ("chiodi per mantice maggiorati"), so maybe other accordion technicians near you may have them as well.

a good thought, but the holes in the casing are VERY close to the edge, so I think anything which involved re-drilling might result in disaster!
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: air leaking round the bellows pins on a liliput
« Reply #5 on: December 13, 2011, 03:48:45 PM »

Would putting the pins in with wax be any good?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: air leaking round the bellows pins on a liliput
« Reply #6 on: December 13, 2011, 03:59:05 PM »

I had trouble with pins dropping out of my (very old) Saltarelle owing to the holes enlarging over time with removal & replacement for routine maintenance & repairs; I used slivers of matchstick & Titebond glue to partly plug the holes, trimmed off the excess on either side when dry, and now the pins are a tight fit again.  Exactly the same theory as using slips of wood to reduce the size of holes in timber to take woodscrews which no longer grip, but on a smaller scale.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: air leaking round the bellows pins on a liliput
« Reply #7 on: December 13, 2011, 04:36:09 PM »

I would add to Theo's method the possibility of lightly waxing the pin to ensure it will be released. Learned from M Pariselle who you may remember was wont to say "If you get is wrong you are f??" can't quite remember the end of this pearl of Gallic wisdom.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: air leaking round the bellows pins on a liliput
« Reply #8 on: December 13, 2011, 05:29:10 PM »

I would be very wary of using any other material in contact with superglue unless you have tested it first.  It is a powerful chemical and can react quite vigorously with organic (in the chemical sense) substances. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: air leaking round the bellows pins on a liliput
« Reply #9 on: December 13, 2011, 05:32:56 PM »

I would be very wary of using any other material in contact with superglue unless you have tested it first.  It is a powerful chemical and can react quite vigorously with organic (in the chemical sense) substances. 

Certainly does with my fingers whenever I use it  ;D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: air leaking round the bellows pins on a liliput
« Reply #10 on: December 13, 2011, 05:39:00 PM »

Exactly! 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: air leaking round the bellows pins on a liliput
« Reply #11 on: December 20, 2011, 06:01:29 PM »

Superglue will not stick to wax.
To back fill bellow pin holes I often use paper chosen for its thickness, depending on how much filling is needed.
Wipe "gap filling" superglue inside the hole with a toothpick, shove your allready curled and cut piece of paper in the hole(this should be enough to go around the bellows pin once) it should stick out either side of the hole, you will trim it off later. Shove the pin in ,to the center of the paper so that it spreads the paper out against the sides of the hole. let sit for at least half an hr before removing. heating the pin with a soldering iron will make it easy to remove the pin if it gets glued in.
 This works well to round out oval holes when you use paper bits that only go part way round the pin. Place the paper in the wide places in the oval.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal