Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Removing surface scratches from celluloid  (Read 7978 times)

0 Members and 1 Guest are viewing this topic.

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Removing surface scratches from celluloid
« on: December 14, 2011, 01:09:43 PM »

Hi

I have a black accordion and some scratches have appeared on it. Rather than just jump in head first and get the Tcut out, I would welcome any advise as how to polish out the scratches. They are not very deep but just slightly deeper than surface marks.
in the past I have used a car polish for cleaning my box, someone also mentioned using brasso? 
What are your thoughts?
Thanks
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Removing surface scratches from celluloid
« Reply #1 on: December 14, 2011, 04:00:44 PM »

I always use Liberon burnishing compound for generally cleaning up the celluloid. If a bit more 'cut' is needed to remove light scuffs and scratches I will use T-Cut. For the slightly deeper marks I will use a rubbing compound that is used for flattening and leveling car paint.
This will leave a matt finish and will need the shine brought back again with T-Cut.  
                                                                                                              
Generally speaking though, if the scratch is deep enough for you to feel when you run a thumb nail over it, it will be very hard to remove, if not impossible.
                         :Ph

Martyn  
« Last Edit: December 14, 2011, 04:03:19 PM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Removing surface scratches from celluloid
« Reply #2 on: December 14, 2011, 04:57:24 PM »

Hi Martyn

Yes I can feel it slightly when I run my thumb nail over it.  Wasn't sure if you could build it up with paint then polish it down.

Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Removing surface scratches from celluloid
« Reply #3 on: December 14, 2011, 07:42:01 PM »

Hi Martyn

Yes I can feel it slightly when I run my thumb nail over it.  Wasn't sure if you could build it up with paint then polish it down.



Not sure if that would work too well. It might be worth a try in an inconspicuous area but once it was built up enough would need to be cut back with wet and dry and then burnished.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Removing surface scratches from celluloid
« Reply #4 on: December 14, 2011, 07:52:02 PM »

A word of caution with putting paint on the plastic (sic) coating of your box some paints can have dramatically damaging affects on the finish of your box and it can travel unabated even if your trying to wipe it off as it travels through the coating itself All the Best mory
Logged

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: Removing surface scratches from celluloid
« Reply #5 on: December 15, 2011, 12:04:06 AM »

I once had a red Erica which I dropped down the steps of Whitby market.

I made a very effective (and all but invisible) repair by using red ski wax.  I just dripped it into the scratches using a soldering iron, and scraped them level with a Stanley knife before it hardened.  I polished the repairs with T cut, and then with guitar burnishing cream.  It polished beautifully.

Ski wax is a very hard and very tough wax which is applied to the soles of ski's.  I've often felt is is more of a plastic than a wax, but it does do the job.  If it will fill holes in ski's, then it will fill holes in cellulid.

Good luck.

Doug
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Removing surface scratches from celluloid
« Reply #6 on: December 15, 2011, 03:13:51 AM »

I always use Liberon burnishing compound for generally cleaning up the celluloid. If a bit more 'cut' is needed to remove light scuffs and scratches I will use T-Cut. For the slightly deeper marks I will use a rubbing compound that is used for flattening and leveling car paint.
This will leave a matt finish and will need the shine brought back again with T-Cut ...

Martyn  

Martyn, does the rubbing compound work well for celluloid that has become cloudy or stained-looking with age? If it's a rubbing compound, it would take off a very thin layer from the top, right? I have a few old celluloid boxes that have brown patches where they've been played or exposed to dirt for so long and I'd love to bring back their true color. I'm wondering if this might do the trick.

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Removing surface scratches from celluloid
« Reply #7 on: December 15, 2011, 09:51:10 AM »

I always use Liberon burnishing compound for generally cleaning up the celluloid. If a bit more 'cut' is needed to remove light scuffs and scratches I will use T-Cut. For the slightly deeper marks I will use a rubbing compound that is used for flattening and leveling car paint.
This will leave a matt finish and will need the shine brought back again with T-Cut ...

Martyn  

Martyn, does the rubbing compound work well for celluloid that has become cloudy or stained-looking with age? If it's a rubbing compound, it would take off a very thin layer from the top, right? I have a few old celluloid boxes that have brown patches where they've been played or exposed to dirt for so long and I'd love to bring back their true color. I'm wondering if this might do the trick.

The various rubbing compounds or burnishing creams will not restore faded or stained celluloid as this almost certainly goes right through. It will just make them shinier. 8) Although T-Cut will remove surface staining.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Removing surface scratches from celluloid
« Reply #8 on: December 15, 2011, 06:49:44 PM »

If you want to fill scratches or build up on celluloid finished boxes use nail polish. Its the liquid form of the same stuff and comes in a vast array of colours making a good match easy.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Removing surface scratches from celluloid
« Reply #9 on: December 15, 2011, 06:53:40 PM »

Its the liquid form of the same stuff

So it will solvent weld itself to the celluloid and any repairs done this way will be permanent.  Take great care not to let it come into contact with the celluloid anywhere else because it will damage the surface.   Allow plenty of drying time for all the solvent to evaporate before attempting to polish.  I suggest 24 hours in a warm room.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Removing surface scratches from celluloid
« Reply #10 on: December 15, 2011, 06:57:52 PM »

Hi, thanks for information, I will try the nail polish, and will use tape to protect the surfaces around the scratch

Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Removing surface scratches from celluloid
« Reply #11 on: December 20, 2011, 04:55:50 AM »

Clean out the scratch first so you don't trap dirt under your repair.
 Apply the nail polish with a tooth pick to the scratch, you may need several applications for deep scratches.
 Don't rush it, you need to wait about 24 hrs between applications or you will get bubbles. Let dry for about a week, put 3000 grit wet/dry sand paper on a small piece of wood (you need to make a tiny sanding block) dab some water on the place to be sanded. You will need to sand down any nail polish that stands above the surface of the celluloid. Keep the sand paper wet or it will clog.
 Finish up with auto paint scratch remover and then  auto paint polish (not wax). This will take awhile.

White mother of pearl celluloid is tricky as it is a transparent pearl finish over a solid white celluloid backing. You will need to duplicate this to do a professional repair.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal