Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Custom bellows size; repairing pinholes  (Read 7344 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Custom bellows size; repairing pinholes
« on: December 18, 2011, 06:31:46 PM »

My Louis Miller 2 row has a quite leaky bellows, and I gather from discussions here that it's best to give up and just have a new one fitted if there are a multitude of problems.  Now, the dimensions of the bellows are 10 3/4" x 6 1/2" or 274 x 160 mm, which is nothing like what Hohner offer in their catalog, to just name the only source I've checked.  Can bellows makers do custom sizes?

Also, note that the bellows are fitted over the frames, which is unconventional, right?  The metal corner brackets on the frames hold them in place.  The frames are secured to the ends with long screws you access by removing the grills. 

All of which makes me think I'll just have to do with the bellows as is.  I am getting better at coping with the leaks and flapping my arms like Tony MacMahon or a chicken on a quintuple espresso.   :|||:

On the repair side, there are lots of quite visible holes in the corners, which aren't fitted with those metal brackets, you notice.  Would it be easy to fit those, would that be a good quick fix; or should I just patch them up with duck tape or the like?  Don't mind if it's all a bit funky looking.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #1 on: December 20, 2011, 11:44:54 AM »

Quite a lot of questions in there so:

1 yes you can get bellows made to measure by any of the Italian bellows makers

2 I expect the bellows are glued on to the frames, this is certainly the normal method.  The metal corner brackets will help in locating them during the gluing process.

3 Without metal corner pieces the corners are exposed to wear.  If the bellows are otherwise good - especially the gussets are sound - then you could do a rebind which is a standard repair procedure for concertina bellows which also don't have metal corners.  You can buy suitable binding leather from David Leese you want the 3/4" skived leather.  You should strip off all the old binding before you start or your bellows will end up significantly thicker.  If you don't want to do the full rebind then you could use small leather patches glued over the corners.  You will need the skive the edges - cut the edges down to a feather edge - so that you don't get an ugly visible edge to the patch.  If you don't want to try this yourself then anyone who repairs concertina bellows would be able to do it for you.  Pictures here of what can be done by a skilled repairer.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Custom bellows size; repairing pinholes
« Reply #2 on: December 20, 2011, 01:58:32 PM »

Thanks much, Theo.  Think I'll just have new bellows fitted, there's about a score of these pinholes all told. 
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Custom bellows size; repairing pinholes
« Reply #3 on: December 20, 2011, 02:38:11 PM »

Out of idle curiosity, does anyone know the average lead time for a bellows from, say, Galassi or Marconi? I've heard anything from 2 months to a year.........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Custom bellows size; repairing pinholes
« Reply #4 on: December 20, 2011, 05:45:52 PM »

About 3 months wait the last time I ordered a set.

 I would be tempted to remove the old bellows tape on your miller, add metal corners, and retape the bellows. This should get several more years out of them.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Custom bellows size; repairing pinholes
« Reply #5 on: August 18, 2015, 01:24:51 AM »

BUMP

Here's a picture of the Louis Miller bellows, how would I go about repairing it?  The pic is a bit blurry but you can see the "pinholes," which are actually about 1mm across.  I slapped a bunch of masking tape over them at one point which helped but looked really funky and thickened the folds to the point where I couldn't use the original metal strapettes anymore.

I have Dave Elliot's book on repairing concertinas and am trying to suss out what to do from there, but aren't sure what he's describing sometimes.  At the excellent local leather shop I picked up a bunch of scraps of very thin hide, .25mm according to my calipers.  Can I make small patches for the outside of the holes that wouldn't go between the folds, or would they just fall off?  Elliot says hide glue is more flexible than others, which was a quality I hadn't heard about before.

I also found Tedrow's photo journal on building a Concertina which helped visualize how this stuff is put together, I wonder if I shouldn't just make new folds for the box.  Looks time consuming but what else is new?  And the Miller bellows are just basic black, none of this flowerly card decor. 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #6 on: August 18, 2015, 08:05:08 AM »

When I repair concertina bellows with this kind of wear I make patches for the corners.  The leather should be goatskin which is much tougher and harder wearing than other types, and .25mm is too thin. I would want about 0.5mm.  Cut a strip of leather about 20mm wide skive the edges, then cut pieces about 40 to 50 mm long, and skive the ends.  Then glue in place with Fiebings leather cement. When you apply a patch stretch the leather as you smooth it down to help minimise wrinkles where the edges of the patch go round the corner.  Skiving the edges of the patches is the mist important part of the process.  To do this effectively you need a flat stone surface to work on, and a razor sharp skiving knife. Done well this is a long term repair.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Custom bellows size; repairing pinholes
« Reply #7 on: August 18, 2015, 08:35:43 AM »

Wot Theo said.  (:)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Custom bellows size; repairing pinholes
« Reply #8 on: August 18, 2015, 04:33:21 PM »

Thanks once more, Theo.  Glad to know the bellows can be patched from the outside like that, I'll see if I have some goat in my box of leather odds and ends.  A fellow with an interest in various bagpipes once told me that the best leather of all was kangaroo - I think he was talking about its durability.  This was a while ago and I'm certain by now there's info to be had out there about what leather is best for different applications.  I remember him saying they still made basketballs out of roo hide, or baseballs?  Something like that.  All that jumping they do pays off, apparently.   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #9 on: August 18, 2015, 04:44:59 PM »

Yes I believe roo leather is tough stuff too.  Definitely avoid sheep, much to soft, sift cow hide is better, but goat is best. It needs to be a soft tan though, not veg tan.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Custom bellows size; repairing pinholes
« Reply #10 on: August 18, 2015, 04:45:46 PM »

Where do you get your goat skin/leather Theo?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #11 on: August 18, 2015, 04:49:01 PM »

We have a very good leather shop in Newcastle - Le Prevo Leather.  They do mail order, but I prefer to choose the skins in person, they vary do much.  Pittards in Yeovil are good too.  Their Hair Sheep leather is similar in some ways to goat, but not quite as durable. Again you really need to visit their shop to choose the most suitable skins.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Custom bellows size; repairing pinholes
« Reply #12 on: August 18, 2015, 04:50:17 PM »

Thanks Theo. Yeovil is do-able for me.

Francisco Furtado Camargo

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Custom bellows size; repairing pinholes
« Reply #13 on: August 18, 2015, 06:10:43 PM »

One factor that I think is very important for the leather resistance is what we call here the "leather flower", I do not know as it is called there, but it is when the surface of it, you can see the skin texture. Here is relatively easy to find goat leather, and even cheap, it is sold by weight.

Something like this ->
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #14 on: August 18, 2015, 07:52:44 PM »

In UK and the rest of Europe leather is priced by the square foot, or square metre but usually you have to buy a whole skin.  Goats are fairly small so that isn't usually a problem, but a whole cow hide is enormous!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Francisco Furtado Camargo

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Custom bellows size; repairing pinholes
« Reply #15 on: August 18, 2015, 07:58:58 PM »

In UK and the rest of Europe leather is priced by the square foot, or square metre but usually you have to buy a whole skin.  Goats are fairly small so that isn't usually a problem, but a whole cow hide is enormous!
large leathers are sold by the square meter here, but there are smaller patches that a whole cow skin. But small skins, such as goat are sold by weight.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Custom bellows size; repairing pinholes
« Reply #16 on: August 18, 2015, 08:08:46 PM »

@KLR.....there is a superb leather goods supply in downtown Portland, that has very fine skins available in lots of colors. I was able to find the exact material to perform a rebind on a 130 year old Jones anglo. They have a fantastic selection, plus tools, adhesives, conditioners....etc. I don't think they would stock anything fine enough for gusset patching though, but gussets can be ordered online from suppliers. Also, forget the duct tape. It is just a mess. The best adhesive for the leather is Feibing's (PVA). It sets fast and is extremely flexible. Good luck with that old Miller....she's a beauty!   (:)
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Custom bellows size; repairing pinholes
« Reply #17 on: August 18, 2015, 09:50:45 PM »

In UK and the rest of Europe leather is priced by the square foot, or square metre but usually you have to buy a whole skin.  Goats are fairly small so that isn't usually a problem, but a whole cow hide is enormous!

I just got off the phone with Oregon Leather, the store Forrest is referring to, they said I had to buy a whole hide and I groaned, as a friend who makes bagpipes buys cow hides there and they go for something like $200 a pop.  But, like you're saying, a goat will only set me back about $20.

Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Custom bellows size; repairing pinholes
« Reply #18 on: August 19, 2015, 02:58:59 AM »

In UK and the rest of Europe leather is priced by the square foot, or square metre but usually you have to buy a whole skin.  Goats are fairly small so that isn't usually a problem, but a whole cow hide is enormous!

I just got off the phone with Oregon Leather, the store Forrest is referring to, they said I had to buy a whole hide and I groaned, as a friend who makes bagpipes buys cow hides there and they go for something like $200 a pop.  But, like you're saying, a goat will only set me back about $20.

Oregon Leather was the place I had in mind, sorry for not stating that. It might be worthwhile to go up and have a look at their stock, as the stuff I was looking at, (if my memory is still intact) for a rather large piece, (a half-hide I think) was the smallest they sold, and the price for same was about $35-$40. I am not knowledgeable about what type of skins that a bagpipe requires, though.
« Last Edit: August 19, 2015, 06:46:24 AM by forrest »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Custom bellows size; repairing pinholes
« Reply #19 on: August 19, 2015, 06:08:10 AM »

You could also try a local hand bookbinder. They usually have boxes of off cuts  and may even give to you for free.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal