Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Custom bellows size; repairing pinholes  (Read 7333 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #20 on: August 19, 2015, 08:17:01 AM »

Here is a photo to show this repair method used on concertina bellows.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Custom bellows size; repairing pinholes
« Reply #21 on: August 19, 2015, 09:36:02 AM »

Here is a photo to show this repair method used on concertina bellows.
I used this method to repair the bellows corners of one of those toy melodeons which had sentimental value for the owner, a friend of mine.
I bought some ready-skived leather patches from Mark Adey in Machynlleth, Wales, who runs the Concertina Spares business - formerly run by David Leese.

http://concertina-spares.com/spareslist.htm
http://concertina-spares.com/catalogue12.htm
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Francisco Furtado Camargo

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Custom bellows size; repairing pinholes
« Reply #22 on: August 19, 2015, 02:22:17 PM »

This repair method affects the use of the melodeon or your sound? I mean, what are the problems of doing this? ???

Just a curiosity, here in my old job in a shoe shop, he had a machine that thins the leather, as in this video https://www.youtube.com/watch?v=1NVNuyLMrgE (sorry about the sound of this video, I just put on mute). Have any of you ever used it? We also use the normal method, with a very sharp knife, sometimes it's even better :D.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #23 on: August 19, 2015, 02:46:56 PM »

This repair method affects the use of the melodeon or your sound? I mean, what are the problems of doing this? ???
It makes no difference to the sound, just easier to play because the air stays inside the bellows (:)

The corners do become a little thicker, so after all the corners are covered the bellows should go in a clamp with a heavy pressure to flatten the corners and allow the bellows to close fully.

Quote

Just a curiosity, here in my old job in a shoe shop, he had a machine that thins the leather, as in this video https://www.youtube.com/watch?v=1NVNuyLMrgE (sorry about the sound of this video, I just put on mute). Have any of you ever used it? We also use the normal method, with a very sharp knife, sometimes it's even better :D.
Yes very useful machine but too expensive unless you use it every day.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Custom bellows size; repairing pinholes
« Reply #24 on: August 19, 2015, 06:44:12 PM »

Thanks for the pic and more advice, Theo.  Will give it a shot.  Bought a little goat hide, it cost less than the skieving knife actually. 
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Custom bellows size; repairing pinholes
« Reply #25 on: August 19, 2015, 06:50:15 PM »

That's a modern machine. I had an old Fortuna skiving machine with all the attachments and everything. I advertised it for sale but no takers it rusted in the back yard and went for scrap. I had to get rid of it, the firm needed the space. Very sad, it could pare any leather or plastic for that matter to any thickness even to the point where you could see through it.  :'(
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom bellows size; repairing pinholes
« Reply #26 on: August 19, 2015, 10:41:31 PM »

I nearly got one in my local auction a few months ago, but was outbid.  For the quantity of leather I use a knife works fine, though it took me a good long time to learn how to get it sharp enough.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Custom bellows size; repairing pinholes
« Reply #27 on: August 24, 2015, 02:42:10 PM »

For the small amounts that we use , yes a paring knife is good enough. It is a dedicated tool though any old knife will not do. They are cheap and can be purchased either right or left handed. There are two types, the English and the French. The English is the one to go for. The French knife is for much larger surfaces and not necessary for melodeon type stuff.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal