Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: I want to buy an old pair of bellows (for a tuning table)  (Read 4042 times)

0 Members and 1 Guest are viewing this topic.

wilfredsdad

  • Member
  • *
  • Offline Offline
  • Posts: 23
I want to buy an old pair of bellows (for a tuning table)
« on: December 27, 2011, 06:35:46 PM »

Hello - I want to make a tuning table and I need an old pair of bellows - does anyone have such? I am happy to pay something for them and they don't need to be in particularly good nick (will patch up with gaffer tape etc). I can travel to collect them (I live in S. Gloucestershire) - anybody? kind regards Pete
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #1 on: December 27, 2011, 06:48:39 PM »

A few years ago you could pick up an old Saxony-built box with a suitable bellows for a couple of quid at a boot fair or a junk shop; sadly I think those days are gone. You can still find knackered old small piano accordions on eBay for a pittance - last year I bought a very tired 1950s/60s 24-bass Hohner for £12. A lot of it ended up in the bin, but I got a bunch of "T" reeds, a box of springs, small screws & odd fittings, some straps and a nice airtight bellows (not to mention some kindling for the wood-burner!), so it wasn't a bad buy. I'm sure someone will come to your aid - I've got a couple that might fit the bill, but I'm 2000 miles away from you..........

Best of luck
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #2 on: December 27, 2011, 07:56:46 PM »

You could keep your eye on this site, lots of stuff for spares.

http://www.carolenoakes.co.uk/bargains.htm
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #3 on: December 27, 2011, 08:16:42 PM »

Freeads papers are good too, its the Adtrader in my area, yours may be a different title.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #5 on: December 28, 2011, 01:46:53 PM »

But even those seem to go for silly money, especially when you add postage. I've been looking for a while and not got anything yet.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #6 on: December 28, 2011, 04:24:34 PM »

Some do, yes - especially the "antique" ones (which were often third-rate boxes when new - there must be a reason why nobody played them for years!). 1950s/60s boxes are often better bargains - they don't yet seem to have acquired the chic of pre-war ones, and will generally yield better quality spares, such as decent steel reeds and nicely-made bellows. No harm in watching this one, though - I stuck a £15 max bid on the Hohner I bought last year and thought no more about it, so I was very pleased to discover I'd won it at only £12. On the other hand, I've put what I think are realistic bids on Saxony junk specimens and found myself outbid with days still to run. A fool and his money........

The trick is to see the potential in something not many others are likely to want - there are still bargains out there if you just need a specific component, such as the bellows, and are happy to junk most of the rest.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #7 on: December 28, 2011, 04:49:21 PM »

If you search completed listings on ebay with keyword accordion and listed in order cheapest first you will see there have been numerous old decrepit boxes sold recently for under £20, and some unsold for much less.   Here is a link to the search
So if you keep a close eye on ebay and set up an appropriate search you should be able to find what you need, but it will take a bit of time and patience.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #8 on: December 28, 2011, 05:33:19 PM »

Interesting search options.

Shame these toy accordions don't have better bellows! There are loads of them.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #9 on: December 28, 2011, 06:58:01 PM »

Interesting search options.

Shame these toy accordions don't have better bellows! There are loads of them.
The trouble is that the toy accordion bellows are far too small (except for tuning another toy accordion).

Remember that it is pretty much essential to do the final tuning with the reed blocks in-situ in the instrument, by holding the entire instrument end in place over the tuning bellows cavity. Ideally your tuning bellows should be as near as possible the same dimensions as the bellows on the instrument you are tuning, so you might need to consider acquiring more than one set of bellows to make your tuning bench.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #10 on: December 28, 2011, 07:20:36 PM »

Alternatively you can do without tuning bellows by using the bellows of the box you are tuning and a rig like this, learned from Rees Wesson who got it from Emmanuel Pariselle:

Last three images in this album

The cutout is made of thin MDF with nicely smoothed edges.
Insert bellows
Attach the treble end, operate bellows, note what needs doing to a reed, do it, repeat 'til finished.
Cuts out the need to check the tuning once the reeds are fitted to the specific melodeon as they always are :)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #11 on: December 28, 2011, 07:45:38 PM »

Alternatively you can do without tuning bellows by using the bellows of the box you are tuning ....
Yes - this method can work nicely, especially for instruments like Cajun-style one-rows where the bellows are butted up to the ends and secured using screws or bolts, rather than a rebated insert and bellows pins. With the latter, the very repetitive detaching/attaching of the end from the bellows frame which is necessary during tuning runs the risk of wear and distortion on the rebated fit (and hence potential damage/air leaks) unless great care is taken.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #12 on: December 28, 2011, 07:53:03 PM »

Alternatively you can do without tuning bellows by using the bellows of the box you are tuning ....
Yes - this method can work nicely, especially for instruments like Cajun-style one-rows where the bellows are butted up to the ends and secured using screws or bolts, rather than a rebated insert and bellows pins. With the latter, the very repetitive detaching/attaching of the end from the bellows frame which is necessary during tuning runs the risk of wear and distortion on the rebated fit (and hence potential damage/air leaks) unless great care is taken.

Doesnt happen often Steve but I would disagree with yours above. The seal between the ends and the bellows is by the gasket not the rebate. This is my standard way of tuning anD has never given me a
problem.  YMMV

pipives

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 275
    • Pip Ives
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #13 on: December 28, 2011, 07:59:49 PM »

Hello - I want to make a tuning table and I need an old pair of bellows - does anyone have such? I am happy to pay something for them and they don't need to be in particularly good nick (will patch up with gaffer tape etc). I can travel to collect them (I live in S. Gloucestershire) - anybody? kind regards Pete

I've been away from a computer over christmas- just seen this. I have a couple of sets laying around that may be of use. Both fairly tired- One is a set of piano accordion bellows with frames still attached and the other are Knackered castagnari Tommy bellows (the rips have been taped up!) wih no frames on though.
Get in touch via email or PM if you need them
Logged
Faversham, Kent

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #14 on: December 28, 2011, 08:08:30 PM »

Alternatively you can do without tuning bellows by using the bellows of the box you are tuning and a rig like this, learned from Rees Wesson who got it from Emmanuel Pariselle:


Good Idea!!   Lester,

Thanks for sharing.
Would one Just hold treble side in place with hand pressure or use the pins and or screws?
Seems like the latter would cause wear. Did I just answer my own question?

Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #15 on: December 28, 2011, 08:13:55 PM »

Alternatively you can do without tuning bellows by using the bellows of the box you are tuning and a rig like this, learned from Rees Wesson who got it from Emmanuel Pariselle:

Good Idea!!   Lester,

Thanks for sharing.
Would one Just hold treble side in place with hand pressure or use the pins and or screws?
Seems like the latter would cause wear. Did I just answer my own question?

Michael

Yep, just hold the table end in place, no pins or screws.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #16 on: December 29, 2011, 08:04:10 AM »

Yes - this method can work nicely, especially for instruments like Cajun-style one-rows where the bellows are butted up to the ends and secured using screws or bolts, rather than a rebated insert and bellows pins. With the latter, the very repetitive detaching/attaching of the end from the bellows frame which is necessary during tuning runs the risk of wear and distortion on the rebated fit (and hence potential damage/air leaks) unless great care is taken.

Doesnt happen often Steve but I would disagree with yours above. The seal between the ends and the bellows is by the gasket not the rebate. This is my standard way of tuning anD has never given me a
problem.  YMMV
Fair enough Lester, if it works for you that's fine.  (:)

I quite understand your point about the gasket providing the ultimate seal, but different makes of instrument have closer tolerances in the fit of the rebate to the end. In my (admittedly still relatively limited) experience, Hohners tend to have a slightly looser fit than, say, Castagnaris. The latter can be quite exacting to separate/refit the ends to the bellows frames - they are usually really quite a snug fit, something which I would seek to preserve as far as possible.

Let's just think about the number of separating/refitting cycles for a moment....
1. Hohner Pokerwork or Erica, treble end.
There are 21 buttons, two voices, bisonoric; therefore 84 individual reed tongues potentially needing tuning, especially if you are contemplating a major re-tune such as putting it into 'Dedic' tuning where almost certainly every reed will need adjusting.

Let's assume you are a good tuner and also blessed with good fortune on the day you carry out the work and therefore can get each reed to its correct pitch with 3 attempts of scratching/filing, testing each attempt. In total that means 84 x 3 = 252 cycles of separating/refitting the ends to the bellows frame. In practice, I suspect it would be quite a lot more.

2. A 21 button 3-voice instrument; e.g. a Castagnari Sander or Tommy.
As above, but you would need to tune an additional 42 reed tongues, taking your total number of separating/refitting cycles to 126 x 3 = 378. That's an awful lot of cycles, and the potential for wear is, for me, too much to contemplate using this method.

3. A 2.5 or 3 row, three voice instrument (heavy!).
Let's not even go there.....


I suppose you could reduce the number of separating/refitting cycles by working on several reeds before testing, but to me that would be a bit like driving at night in fog with no headlights: scary  :Ph

But - as I said at the start, if it works for you, that's fine, but personally, I would choose the separate tuning bellows route.  
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #17 on: December 29, 2011, 08:44:32 AM »

It's certainly an extremely nifty solution, though like Steve, I'd be a little concerned at the number of times the ends & bellows have to be separated and reunited. On the other hand, a dedicated tuning bellows will need an aperture that will accept any box you are likely to tune, or else have a removable/interchangeable top so that each instrument fits comfortably with a decent air-seal.  Of course many boxes will be of similar dimensions, so in practice you'd probably only need two or three alternative tops even if you're doing a lot of tuning.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: I want to buy an old pair of bellows (for a tuning table)
« Reply #18 on: December 29, 2011, 09:51:29 AM »

.... or else have a removable/interchangeable top so that each instrument fits comfortably with a decent air-seal.  Of course many boxes will be of similar dimensions, so in practice you'd probably only need two or three alternative tops even if you're doing a lot of tuning.
That is what I use. I have a couple of interchangeable tops each covered with a sheet of soft imitation leather* to provide a reasonably good air seal.

*I wouldn't particularly recommend this, but I just happened to have some to hand, left over from another project. I will probably replace it with chamois leather soon.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal