Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Why or why not D/C#?  (Read 8941 times)

0 Members and 1 Guest are viewing this topic.

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Why or why not D/C#?
« on: January 05, 2012, 09:33:57 PM »

Hope you understand what I'm talking about here:
In this thread: Thoughts on C#/D/G, Ukebert's and Steve Jones' posts mentioning D/C# players and D/C#/C layout have been making my mind spin ??? of possible possibilities!  (:)

For a while I've been thinking about maybe getting a new good semitone box. My fingers/mind works much better playing from outside in, with the home key D on the outside. I became very aware of this after experimenting with a great C/C# box I regret selling, C being the home key. Could be years of playing D/G and C/F that messed with my brain.

So why or why not D/C#? And if in a 2.5 box, any good ideas what to do with the extra row, maybe something in C?

My intentions with such a box would be to have fun playing some ITM, (but I'm no good at it), so I know I'll mostly end up playing other styles...
Logged
Sweden, Skåne

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why or why not D/C#?
« Reply #1 on: January 05, 2012, 09:57:48 PM »

Hasse,

You could also play outside-in on a D/D#, and that system has a lot to recommend it.

But since you inquired about D/C#, here's some nice D/C# playing:

http://www.youtube.com/watch?v=U0fOlTjpzAw&feature=gv

http://www.youtube.com/watch?v=LVEXNj95Ls4&feature=related

http://www.youtube.com/watch?v=J0fCuK3k8Fk

It would take me (and maybe you also) many years of practice to improve toward that standard of playing, but also the D/C# is suited toward more homemade, amateur music that might give you and your listeners or dancers a lot of enjoyment in the meantime.

An inner row or part row in C could be very useful too.  But then I guess the box would tend to be heavier and maybe bigger in bellows dimensions -- and the fun of D/C# for me is using lots of changes in  bellows direction, which can be easier with a smaller box.

PG

My D/C# accordions:



Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Why or why not D/C#?
« Reply #2 on: January 05, 2012, 11:20:21 PM »

I think that (upon consideration), D/C# is a fine system, but it is tricky to expand to 3 rows or 2.5 rows. You could have C/D/C#, which would give you lots of nice reversals and harmony, but I'm not convinced that the fingering would be particularly nice.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Why or why not D/C#?
« Reply #3 on: January 06, 2012, 04:51:12 PM »



You could also play outside-in on a D/D#, and that system has a lot to recommend it.


My D/C# accordions:






Hi Paul,

I feel like I know you but we haven't meet.
I took melodeon classes from Comahaltas teacher J.C. from boston
(poor man!  me knowing only a couple of irish tunes )  But he was very patient
and gave me the confidence that I could with a lot of work and listening,
play a few tunes. He spoke of you often. Of your ability to play many instruments
and repair them. And your gift of hearing.
Hopefully someday I have pleasure of meeting you.

My question on  D/ D# what do you recommend about it vs D /C# ?
My teacher has a one and half row (similar to the one in your pic. very nice looking boxes !)
beautiful and loud   seems like you could manage most tunes  on it.
I have been thinking of getting a semitone box but want to keep the driving sound of a melodeon any advise would be appreciated. 
 
Sincerely
Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why or why not D/C#?
« Reply #4 on: January 07, 2012, 01:43:54 AM »

Hi Michael,

Thanks for the kind words.  I miss the Boston area and all my musician friends there.

If your teacher's accordion is a 1949 Walters 15-key D/C# that he bought new, you are lucky to be his student! This guy can teach you hundreds of tunes in a good few keys that sound great on a 1-row melodeon in D. For one of those, the older Hohner D 4-stops are a great buy.  Or you can move on to a D/C#.  If you can keep working with this teacher, I suggest putting aside the D/D# idea (that system is very nice though for outside-in players who also would like the option of playing inside-out in the key of Eb).  D/C# is one of the rarest systems around these days for Irish music, but there is a lovely tradition there that your teacher would be uniquely able to share with you.  For an accordion in D/C#, you might look around the Boston area for a 15 - 19 key sold by Baldoni-Bartoli (NY), O'Byrne DeWitt Baldoni, or Walters (NY).  If you can find one in good condition, that should do the job.  If you don't turn up a good one locally, please email me and I will try to help.

I personally play a little on several different accordion systems but if you have recently started on box as an adult, then I would stick with D melodeon (plus optionally *either* D/C#or C#/D 2 row) rather than divide up your efforts among other systems that play very differently.  In fact, the 1-row box can keep you plenty busy learning and playing great music for a lifetime.

PG


Logged

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Why or why not D/C#?
« Reply #5 on: January 08, 2012, 11:48:36 AM »

It would take me (and maybe you also) many years of practice to improve toward that standard of playing, but also the D/C# is suited toward more homemade, amateur music that might give you and your listeners or dancers a lot of enjoyment in the meantime.

That definitely goes for me! I really ought to stick to quintboxes and go nowhere near a semitone box. While the quint box is serious business for me, the semitone box got a more beginners fascination for me, not really knowing so much about the boxes, styles and playing, besides of course construction, reeds and such similar to the quint box.

So now I wonder: Do anyone have any idea why the D/C# isn't as common/popular as the C#/D? Somehow it seems more practical having the D on the outside?

You could also play outside-in on a D/D#, and that system has a lot to recommend it.

An inner row or part row in C could be very useful too.  But then I guess the box would tend to be heavier and maybe bigger in bellows dimensions -- and the fun of D/C# for me is using lots of changes in  bellows direction, which can be easier with a smaller box.

Well, I got lots of reeds and boxes laying around, so I thought I would do something special with them, (not quint!). But the 2.4 row wreck is probably going to be swabbed away next week anyway, so thats not a option anylonger. I've been thinking about a D/D#layout, but I'm afraid that might be complicating things too much.

BTW: Very nice boxes you got there PG!
Logged
Sweden, Skåne

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Why or why not D/C#?
« Reply #6 on: January 08, 2012, 01:16:19 PM »

 does the desire for a DC# box with or without  extre odds & sods  come from  the intention to play mainly in D (on the row) whilst having  a chance of also playing in  some other keys using both, or all 3 rows.

 Has anybody considered  adding  a 10 button row of same both way notes to a standard one row in D layout. eg, C,Eb,F,G#,Bb,C.F,Eb,G#,F.  This would have the advantage of being able to start anywhere on the D row & adding necessary notes from  the other row without the added worry of getting bellows direction right.- or is this just a daft idea.

on the other hand  D is hardlyh a problem on a BC

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Why or why not D/C#?
« Reply #7 on: January 08, 2012, 02:21:28 PM »


So now I wonder: Do anyone have any idea why the D/C# isn't as common/popular as the C#/D? Somehow it seems more practical having the D on the outside?


Playing rolls in Irish music on semitone boxes relies on playing on the inside row, they don't really work outside-in.

tedrick

  • Guest
Re: Why or why not D/C#?
« Reply #8 on: January 08, 2012, 03:22:46 PM »

Joe Derrane plays D/C# correct?

I believe Jim Coogan did as well -
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why or why not D/C#?
« Reply #9 on: January 08, 2012, 04:22:17 PM »

does the desire for a DC# box with or without  extre odds & sods  come from  the intention to play mainly in D (on the row) whilst having  a chance of also playing in  some other keys using both, or all 3 rows.

 Has anybody considered  adding  a 10 button row of same both way notes to a standard one row in D layout. eg, C,Eb,F,G#,Bb,C.F,Eb,G#,F.  This would have the advantage of being able to start anywhere on the D row & adding necessary notes from  the other row without the added worry of getting bellows direction right.- or is this just a daft idea.

on the other hand  D is hardlyh a problem on a BC

george

Hi George,

I've never seen this done for the second row of a melodeon, but the idea does sound like it could play very well!  Some anglo concertinas are set up with one or more buttons on the third row, or the left-hand thumb button, that play the same note in both directions and, just as you suggest, these work well to complement the notes on the main two diatonic rows.

PG
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Why or why not D/C#?
« Reply #10 on: January 08, 2012, 04:29:47 PM »

The disadvantage with that idea is that the cross fingering will change with the octave, whereas with a diatonic two row system it doesn't, as both rows are periodic 4 buttons on push and  on pull. A better system might be C/C, Eb/Eb, F/F, G#/G#, C/Bb and repeat. Or something similar, haven't put much thought into it.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Andrel

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 246
Re: Why or why not D/C#?
« Reply #11 on: January 08, 2012, 05:04:52 PM »

   D/C# is what I play, primarily. I came to it after starting out on B/C, then switching to C#/D, but I finally found my groove when I purchased a box that Jim Coogan had ordered for himself, (a Casta Dinn III ) with a bass side that didn't suit him, he found out. I just love the feeling of  playing mostly on the outside row, as I tend to play a lot of Irish and Québec stuff. Reaching in is no problem whatsoever for me, and I would heartily recommend this system to anyone. It also helps to have the longer row in the key that you use most. It's getting to be pretty popular in Québec, I hear.
   I also own a D#/D that I play when the mood for Eb, F tunes strikes me.
Logged
Bertrand Gaillard D/C#, Acadian in C, Castagnari Ciacy
B/C, Castagnari Sharon D/C#

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Why or why not D/C#?
« Reply #12 on: January 08, 2012, 06:08:25 PM »

   D/C# is what I play, primarily. I came to it after starting out on B/C, then switching to C#/D, but I finally found my groove when I purchased a box that Jim Coogan had ordered for himself, (a Casta Dinn III ) with a bass side that didn't suit him, he found out. I just love the feeling of  playing mostly on the outside row, as I tend to play a lot of Irish and Québec stuff. Reaching in is no problem whatsoever for me, and I would heartily recommend this system to anyone. It also helps to have the longer row in the key that you use most. It's getting to be pretty popular in Québec, I hear.
   I also own a D#/D that I play when the mood for Eb, F tunes strikes me.

Andrel, I think you just convinced me to try and put a D/C# box together. (:) And I will probably not bother with any kind of extra row.
Logged
Sweden, Skåne

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why or why not D/C#?
« Reply #13 on: January 08, 2012, 06:39:16 PM »

A couple more thoughts on D/C#. . .

To boxcall's comment about "wanting a 2 row box with some of the driving sound of a melodeon:"  I like a D/C# to have at least 3 voices (LMM) but LMMM, LLMM, LMMH, or even more voices are great.  I like the box to have a big open, bright sound and this can be helped by a design where all the pallets, or at least the pallets for the outside D row, open up well away from the keyboard and where the grille doesn't muffle the crispness of the reeds.  An aluminum soundboard seems to be part of the equation in most of the great D/C# boxes I've played; possibly that's just a coincidence, or could its reflective qualities be influencing the sound after that leaves the pallet holes?  When the inside row has only 1 up to 7 buttons, all the pallets from both rows are usually lined up in one rank on the soundboard.  Sometimes that is also true of the early 19 key D/C# boxes, but most 19 keys have pallets in 2 rows with the D row away from the keyboard for brightest tone. I would say that the modern design of some Saltarelles and other 2-row boxes where the inside row pallets open on the soundboard farthest away from the keyboard is not ideal for a D/C# box.

Re: playing "outside-in," another issue with many 2 row boxes (or even some 1 row boxes) is that the outside row of buttons is too close to the keyboard edge for playing comfortably.  It's nice to have the outside row buttons located in a bit from the keyboard edge, although of course you can add a spacer there as many players do.*  The outside row of the O'Byrne DeWitt Paolo Soprani that I illustrated above is a little close to the edge for comfort!  The outside row of the grey Sonola shown below is a little better placed for using that as a main row, IMO, and this Sonola also has a nice crisp tone on the outside row for that style of playing . . . but on the other hand, the Sonola is fairly big and bass-side-heavy.  

PG

* See the article linked below for a photo of the late William Sullivan, RIP, one of many players who added a spacer to the keyboard edge of his accordion (in his case, a one-row Baldoni-Bartoli).  This article also illustrates some other D and  D/C# Irish-American boxes.:

http://www.nyfolklore.org/pubs/voic36-3-4/accordion.html



« Last Edit: January 08, 2012, 06:42:11 PM by pgroff »
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Why or why not D/C#?
« Reply #14 on: January 08, 2012, 07:44:57 PM »

I know some Baldoni's have had the DC# reversed to a C#D giving a Paolo sound but it can be done using a Paolo C#D and reversing it to a DC# giving very much a Baldoni Bite to the box Loverly. My O'Byrne Dewitt Baldoni has an ally sound board which I think adds to it as well, also when Lars had the box he used plastic valves (but only on the D row) and I think this has a role also, infact IMHO I believe the plastic valves have a role in the sound of a Hohner aswell. mory
Logged

Andrel

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 246
Re: Why or why not D/C#?
« Reply #15 on: January 08, 2012, 08:00:56 PM »

The closeness to the edge doesn't bother me, but I have never tried using a spacer. I also have a Baldoni (19), and I just checked the distance between the edge and the buttons, and it's a bit wider than on the Gaillard, not enough to make a difference.
More significant is how fat the buttons are on the Baldoni, compared to the inside row and other accordions in general. It makes for comfortable playing. Nice article & pics, by the way, Paul.
Logged
Bertrand Gaillard D/C#, Acadian in C, Castagnari Ciacy
B/C, Castagnari Sharon D/C#

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Why or why not D/C#?
« Reply #16 on: January 08, 2012, 08:19:48 PM »

If I've got this right, an Al soundboard will sound brighter because for a given stiffness it can be thinner in diameter than the equivalent of wood. There are some really interesting thoughts here.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why or why not D/C#?
« Reply #17 on: January 08, 2012, 08:22:59 PM »

Hi Andrel,

Thanks -- obviously the article is by Ted McGraw, a good friend who is researching all these accordions but (I think) especially the Superior boxes and also the McNulty Family's history.  Hugh O'Rourke, Jack Conroy, and the late Joe Joyce (among a good few other players) have been very helpful to me as I learned about the D/C# tradition.

The spacing issue obviously depends a lot on the player, where they put the thumb, whether they use a thumbstrap, etc, but I do notice that some boxes seem to have awkward geometry for the D/C# style.  With that little black OBD Paolo shown above, the problem is partly that the keyboard edge itself sort of runs out, due to its round-ended profile, in close proximity to both the high and low end of the 10 button D row.  That really bothered its former owner!  Yes, button size can make a big difference too.  The boxes with bigger buttons on the outside than inside row do seem to work pretty well, and some players (not all) like the square "chiclet" buttons found on some Irish-American boxes. . . But then, players who want to convert a D/C# to a C#/D often hate the difference in button size between rows, and I've seen a few such boxes where I believe the keyboard was modified to convert them to same-size buttons.

Re: your D#/D, at present I have the 2 inside rows of a converted early Paolo club in that layout and it's nice!
http://forum.melodeon.net/index.php/topic,8587.0.html

mory,

I agree that a good Paolo played on the outside row (whether the reeds are swapped to D/C#, or whether its a D/D# or just played like one) can have a nice old crash to it!

ukebert,

The effect you describe may be important, I'm not sure, but I also wonder if sheer reflection is an important part of any (possible) good, or bad, influence of aluminum soundboards on the tone quality.  Bare metal grilles and keyboard plates, if present, might also be resonating and reflecting sounds around the vicinity of the levers and pallets, and I have a hunch these also influence the tone of some accordions, including those that have a wooden soundboard . . .  

I'm sure the best restorers and especially the accordion manufacturers and small shop makers have a great handle on all these design options, I remember Martin Connolly told me about his experiments with different soundboards -- at the time he was favoring aluminum for the sound he wanted.

PG
« Last Edit: January 08, 2012, 08:37:55 PM by pgroff »
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Why or why not D/C#?
« Reply #18 on: January 08, 2012, 08:44:09 PM »

If I've got this right, an Al soundboard will sound brighter because for a given stiffness it can be thinner in diameter than the equivalent of wood. There are some really interesting thoughts here.

Is it the reflective nature as well? (bang an old ally saucepan and an old wooden box) I've fiddled quite abit with Bike silencers, takes a lot to shush a pair of old Harley pipes without loosing the characteristic sound

Paul
I had a go on Paul Brock's old grey DD# a while back it pretty much seemed the inner D# row had most of the bite so I'm thinking no secondary pivot for the finger board pallets and would this be outside buttons/pallets nearest finger board inside buttons/top pallets do you know, now there's some tiny buttons. mory


Doesnt Martin machine his reed blocks from the solid as well these days?
« Last Edit: January 08, 2012, 08:47:34 PM by mory »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Why or why not D/C#?
« Reply #19 on: January 08, 2012, 09:22:54 PM »

Banging is very different from reflecting! Put a directional white noise source next to an aluminium panel and measure the sound coming off and compare with a wooden one. To be honest, I'm still not sure about reflection. My instinct tells me that it won't make much odds, I'll wait for IanD to comment.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal