Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Paolo Soprani aluminium sound board???  (Read 6478 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Paolo Soprani aluminium sound board???
« on: January 06, 2012, 11:17:01 AM »

 I think I read somewhere that some Paolo Sopranis have a metal, specifically aluminium, sound board. Is this correct? Would the reed blocks be mounted the same way as on a wooded sound board? How would the sound differ from a wooden board - if at all?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Paolo Soprani aluminium sound board???
« Reply #1 on: January 06, 2012, 11:41:59 AM »

As has been discussed at lenght here the soundboards (fondo etc) has little or no effect on the way the box sounds. My Tommy had an aluminium or some such sound board, see attached. I think the choice in this case was for ease of manufacture to get all the reeds in a small space.

greybox1

  • Good talker
  • **
  • Offline Offline
  • Posts: 58
Re: Paolo Soprani aluminium sound board???
« Reply #2 on: January 06, 2012, 12:07:25 PM »

I think it was from the 70s onwards paolo soprani used aluminium sound boards.
I prefer the wooden soundboard. The aluminium can sound metalic
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Paolo Soprani aluminium sound board???
« Reply #3 on: January 06, 2012, 03:10:02 PM »

I think I read somewhere that some Paolo Soprano's have a metal, specifically aluminium, sound board. Is this correct? Would the reed blocks be mounted the same way as on a wooded sound board? How would the sound differ from a wooden board - if at all?

BIG difference (but all the educators out there will attempt to prove how that statement is scientifically impossible, but mine and loads of other Paolo players ears say it is so) wood mellower, ally brighter, hope you have you brolly ready for the storm  (:) All the Best mory
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Paolo Soprani aluminium sound board???
« Reply #4 on: January 06, 2012, 03:47:08 PM »

I think I read somewhere that some Paolo Soprano's have a metal, specifically aluminium, sound board. Is this correct? Would the reed blocks be mounted the same way as on a wooded sound board? How would the sound differ from a wooden board - if at all?

BIG difference (but all the educators out there will attempt to prove how that statement is scientifically impossible, but mine and loads of other Paolo players ears say it is so) wood mellower, ally brighter, hope you have you brolly ready for the storm  (:) All the Best mory




 Surely it is a measurable thing. There must some aspect of the sound that is affected by the materials used in the manufacture of the instrument. Has anyone made an aluminium sound board to replace a wooden one, or vice versa?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Paolo Soprani aluminium sound board???
« Reply #6 on: January 06, 2012, 04:09:16 PM »

is that spots of rain I see on the window  ::)  ;D
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Paolo Soprani aluminium sound board???
« Reply #7 on: January 06, 2012, 04:27:07 PM »

I think I read somewhere that some Paolo Soprano's have a metal, specifically aluminium, sound board. Is this correct? Would the reed blocks be mounted the same way as on a wooded sound board? How would the sound differ from a wooden board - if at all?

BIG difference (but all the educators out there will attempt to prove how that statement is scientifically impossible, but mine and loads of other Paolo players ears say it is so) wood mellower, ally brighter, hope you have you brolly ready for the storm  (:) All the Best mory

Wood mellower, aluminium brighter -- unlikely for all the usual reasons.
5mm thick mellower, 1.5mm thick brighter -- likely for all the same reasons.

Ian  ::)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Paolo Soprani aluminium sound board???
« Reply #8 on: January 06, 2012, 04:50:43 PM »

A whole host of construction details might affect the sound quality.  Al vs wood for the fondo is one of the more obvious differences so probably that is the reason it gets discussed. 

Pablo Soprano produced boxes for the Irish market for several decades so my advice would be not to try to pick out particular details but just listen to the sound of as many instruments as you can until you find one you like.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Paolo Soprani aluminium sound board???
« Reply #9 on: January 06, 2012, 04:58:29 PM »

Where's that umbrella emoticon when you need it  ;D actually Ian you may wish to take my comment in the way it was intended The wood mellow ally bright refers to the box's I  have played, as I have never played one with either a 5mm ally or 1.5 wood pedantic board I can safely leave the ridiculing of my statement to others have a ball  :P ;D All the Best mory  Theo hits the nail on the head again  :||:
Logged

Hallelujahal

  • Guest
Re: Paolo Soprani aluminium sound board???
« Reply #10 on: January 06, 2012, 05:09:54 PM »

I think that the whole business of sound quality vs materials used in construction is really quite interesting. Interestingly enough when Seydel brought out their recent harmonica range with stainless steel reeds as opposed to the usual brass or phosphor bronze reeds you'd have thought that there'd be a significant difference in sound/tonal quality. But in fact nothing of the sort - (though the difference between brass & steel reeds in a concertina often brings in a very different result). What seems to affect sound and tonal quality far more than materials used are the resonance chambers which move the sound from the box to our ears. I suspect that the materials used in most boxes are far less important than the shape of the reed chambers and the internal acoustic properties of the 'box'?
AL
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Paolo Soprani aluminium sound board???
« Reply #11 on: January 06, 2012, 07:18:13 PM »

A whole host of construction details might affect the sound quality.  Al vs wood for the fondo is one of the more obvious differences so probably that is the reason it gets discussed. 

Pablo Soprano produced boxes for the Irish market for several decades so my advice would be not to try to pick out particular details but just listen to the sound of as many instruments as you can until you find one you like.


 3 voice greys seem to be very sweet sounding instruments.  Certain older Benny and my old Beltuna Samuel III,  which was particularly sweet. Expensive taste.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Paolo Soprani aluminium sound board???
« Reply #12 on: January 07, 2012, 03:45:32 PM »

I think that the whole business of sound quality vs materials used in construction is really quite interesting. Interestingly enough when Seydel brought out their recent harmonica range with stainless steel reeds as opposed to the usual brass or phosphor bronze reeds you'd have thought that there'd be a significant difference in sound/tonal quality. But in fact nothing of the sort - (though the difference between brass & steel reeds in a concertina often brings in a very different result). What seems to affect sound and tonal quality far more than materials used are the resonance chambers which move the sound from the box to our ears. I suspect that the materials used in most boxes are far less important than the shape of the reed chambers and the internal acoustic properties of the 'box'?
AL

Exactly my point :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Paolo Soprani aluminium sound board???
« Reply #13 on: January 07, 2012, 04:50:44 PM »

I thought the poster of this thread was quite clear in his question, do we really have to have all this every time? :( he was clearly asking about the difference in sound of two particular set ups of particular boxes. I hope your question is answered KP. All the Best mory
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Paolo Soprani aluminium sound board???
« Reply #14 on: January 07, 2012, 04:55:37 PM »

I thought the poster of this thread was quite clear in his question, do we really have to have all this every time? :( he was clearly asking about the difference in sound of two particular set ups of particular boxes. I hope your question is answered KP. All the Best mory

The OP was asking that; then the people replying to the thread wheeled out the usual comments which prompted the usual replies :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Paolo Soprani aluminium sound board???
« Reply #15 on: January 07, 2012, 05:02:35 PM »

I'm not sure why your laying this at Lester's door but I suppose you may have a point  >:E Bless you Ian maybe we are both as predictable as each other then  ;)
on topic. are you looking for a box KP or just deliberating over the ins and outs?  ;D
« Last Edit: January 07, 2012, 05:19:34 PM by mory »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Paolo Soprani aluminium sound board???
« Reply #16 on: January 07, 2012, 05:16:40 PM »

I think that the whole business of sound quality vs materials used in construction is really quite interesting. Interestingly enough when Seydel brought out their recent harmonica range with stainless steel reeds as opposed to the usual brass or phosphor bronze reeds you'd have thought that there'd be a significant difference in sound/tonal quality. But in fact nothing of the sort - (though the difference between brass & steel reeds in a concertina often brings in a very different result). What seems to affect sound and tonal quality far more than materials used are the resonance chambers which move the sound from the box to our ears. I suspect that the materials used in most boxes are far less important than the shape of the reed chambers and the internal acoustic properties of the 'box'?
AL

I won't get into the debate about accordion soundboards right now (though I might at some point!). But re: Al's observation, I'm always interested to hear about the use of stainless steel reedtongues in free reed instruments.  I noticed when making reed tongues for old London concertinas that stainless steel can be used to make excellent replacements for brass or nickel-silver reed tongues, (for me) a better match in tone quality and response than I could achieve with typical spring-steel reed tongues going into a brass-reeded or "nickel"-reeded instrument.  The stainless steel I used (very unscientifically working with scraps lying around a machine shop that were not identified to any particular one of the many stainless steel alloy formulas) was a little less springy than the best high-carbon steel but made very nice reeds.  I also have a very interesting Jeffries anglo concertina whose original reedtongues look to be made of an early form of stainless steel -- maybe because it went to Madras.  That instrument has very special, sweet tone -- responsive and loud but possibly not quite as blazingly fast as the best Jeffries with reeds of more typical steel -- and very unusually (for a good Jeffries never subjected to abuse or repitching) a couple of those stainless tongues have broken over the years.

PG

Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Paolo Soprani aluminium sound board???
« Reply #17 on: January 07, 2012, 05:57:07 PM »

 Mory - I'm not looking for a box. I was wondering if replacing the wooden sound board in a dodgy old Pokerwork, with an ally one would make any difference whatsoever! I might do it anyway AND make a replacement wooden one.  At least that way I can make my own mind up.  Same box, same reeds,  different in only one aspect. Perhaps I'll post some sound clips so people can do the 'Pepsi challenge '.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Paolo Soprani aluminium sound board???
« Reply #18 on: January 07, 2012, 07:26:06 PM »

Sounds like a plan! How is it your not looking for a box? have you found the cure? Sure you can't be tempted there's lots about. Aw g'wan, g'wan, g'wan, y'will, 'y'will, y'will ....... you could do a three way test anyways, current and your planned two. Whats in your Borsini out of interest? mory


and then I spotted your response to Artys post  ;D
« Last Edit: January 07, 2012, 07:29:04 PM by mory »
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Paolo Soprani aluminium sound board???
« Reply #19 on: January 07, 2012, 09:10:49 PM »

 Wood in the Borsini!! 

 As for not looking for a box, one is always looking for a box, I meant not looking specifically for one with ally sound board.
 If as Reeds muses the Soprani turns out to be a V.  Soprani then I might not be so interested. Now if III voice B/C Sara came on the market.....
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal