Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Quietening Hohner Pokerwork action.  (Read 9707 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Quietening Hohner Pokerwork action.
« on: January 09, 2012, 02:42:41 PM »

 I have found that just lowering the action reduces some of the 'unwanted' treble mechanical noise.  Not enough though. What are the tried & trusted methods for quietening,  or de-clacking the mechanism? Also I would like to replace the buttons with either black pearl or plain black - do such things exist or does one have to adapt or bastardize something else?

 Thanks in advance.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Quietening Hohner Pokerwork action.
« Reply #1 on: January 09, 2012, 02:51:35 PM »

Pete--there is a good thread on this somewhere already, but I can't off hand find it.
Try search "clack".
The key is in re-padding the  pads, not so much the action.
Though reducing the treble button travel is probably the best fix for general playability.  And super easy to do.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Quietening Hohner Pokerwork action.
« Reply #2 on: January 09, 2012, 04:00:06 PM »

 I had a bit of look for pertinent threads, but I often get nothing with the search facility.
    When you say 're-padding', do you mean the pallet faces? I can think of a number of ways to do this but I'm sure there is a best way.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quietening Hohner Pokerwork action.
« Reply #3 on: January 09, 2012, 04:15:44 PM »

My Club II was MUCH quieter after refacing pallets with felt-backed Persian leather. Mind you, I quite like a bit of clack (in a Hohner, that is...... :D).

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Quietening Hohner Pokerwork action.
« Reply #4 on: January 09, 2012, 04:26:29 PM »

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quietening Hohner Pokerwork action.
« Reply #5 on: January 09, 2012, 04:59:58 PM »

Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Quietening Hohner Pokerwork action.
« Reply #6 on: January 09, 2012, 05:39:59 PM »

 Is it by any chance sticky-backed, or would some sort of contact adhesive be used?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Quietening Hohner Pokerwork action.
« Reply #7 on: January 09, 2012, 05:57:29 PM »

Is it by any chance sticky-backed, or would some sort of contact adhesive be used?

I use Copydex.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quietening Hohner Pokerwork action.
« Reply #8 on: January 09, 2012, 06:42:38 PM »

I used a white PVA-type glue. There plenty of safe, easy to use glues that will successfully stick felt to wood.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Quietening Hohner Pokerwork action.
« Reply #10 on: January 09, 2012, 08:48:51 PM »

And see here, too: https://picasaweb.google.com/robtgf/HohnerPokerwork?authkey=Gv1sRgCP7Y9Kjp0pCacw#5548832015960157282

Bob
[/quote

  Thanks for the post. Brilliant stuff. I especially like the bass action wooden conversion thing.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Quietening Hohner Pokerwork action.
« Reply #11 on: January 10, 2012, 12:52:18 AM »

I think I have used what is called "craft glue".
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Quietening Hohner Pokerwork action.
« Reply #12 on: January 10, 2012, 09:05:43 AM »

Is it by any chance sticky-backed, or would some sort of contact adhesive be used?
Charlie Marshall recommends Bostick general purpose glue, which is a contact-type adhesive. I've used it for refacing pallets and it works just fine. Do a batch of pallets at one time, side-by-side on the leather/felt sheet laid out on a cutting board or similar. Use a thin film of glue on both the pallet surface and the felt, allow a couple of minutes to become tacky, then just press together. Since a strong bond forms almost immediately, you can then get on with the business of using a sharp blade to separate the individual pallets and trim off any excess facing material.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quietening Hohner Pokerwork action.
« Reply #13 on: January 10, 2012, 09:34:03 AM »

Almost any glue with reasonably quick grab and a shortish open time will do the job; whatever your favourite is. Incidentally, there are two Bostik GP glues - a white PVA and a clear.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Quietening Hohner Pokerwork action.
« Reply #14 on: January 10, 2012, 09:43:20 AM »

Incidentally, there are two Bostik GP glues - a white PVA and a clear.
OK - it's clear sort which Charlie recommends.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Quietening Hohner Pokerwork action.
« Reply #15 on: January 10, 2012, 10:18:39 PM »

 Thanks to everyone for their input, really helpful. Is limiting the button travel as easy? Will it have any impact on the noise of the action?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Quietening Hohner Pokerwork action.
« Reply #16 on: January 10, 2012, 10:40:53 PM »

Thanks to everyone for their input, really helpful. Is limiting the button travel as easy? Will it have any impact on the noise of the action?

I believe it will help and Theo's masterclass is HERE

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Quietening Hohner Pokerwork action.
« Reply #17 on: January 11, 2012, 01:21:03 AM »

Thanks to everyone for their input, really helpful. Is limiting the button travel as easy? Will it have any impact on the noise of the action?

I believe it will help and Theo's masterclass is HERE
Here is the link which bypasses the Facebook login window.
Theo's method

Limiting the button travel is definitely to be recommended. I've used Theo's method successfully on two instruments and it works very nicely. The only modification I like to make to Theo's method is to glue a thin leather strip on top of the buffer bar. It cuts down the noise even more. I guess eventually it will wear through to the wood, but it hasn't happened so far in two years of playing. The leather strip can easily be renewed if and when the time comes.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Quietening Hohner Pokerwork action.
« Reply #18 on: January 11, 2012, 08:33:20 AM »

The only modification I like to make to Theo's method is to glue a thin leather strip on top of the buffer bar. It cuts down the noise even more. 

Yes you can do that.  It will also make the feel of the action softer.  Whether you prefer this or the more positive stop you get without it is a matter of personal preference.  The kind of wood you use also makes a difference.  I always use western red cedar, a very soft timber, and I find I don't need to add a softening strip.  The main reason I don't like to use the added strip is that it make it very difficult to get the exact distance of travel you want.  The inner row levers and the out row levers have  slightly different geometry and if you want the same travel for both then the wooden strip has to be relieved slightly more under the inner row levers, and it takes quite a bit of trial and error adjustment to get it right. I can't see how to accomplish that if there is a leather strip in place, or to allow for adding it after making the adjustments.  Just use a nice soft timber and you can avoid all that.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Quietening Hohner Pokerwork action.
« Reply #19 on: January 11, 2012, 08:59:09 AM »

The only modification I like to make to Theo's method is to glue a thin leather strip on top of the buffer bar. It cuts down the noise even more.  
Yes you can do that.  It will also make the feel of the action softer.
Yes it does, but only slightly and I actually quite like it. It's similar in feel to the mushroom-style buttons which have a felt washer underneath the head.

Quote
The main reason I don't like to use the added strip is that it make it very difficult to get the exact distance of travel you want.  The inner row levers and the out row levers have  slightly different geometry and if you want the same travel for both then the wooden strip has to be relieved slightly more under the inner row levers, and it takes quite a bit of trial and error adjustment to get it right. I can't see how to accomplish that if there is a leather strip in place, or to allow for adding it after making the adjustments.
It's no more difficult to achieve than getting the travel right with just the wooden strip. Once I've made an impression of the lever arms on the wood by pressing them down, I then use a small diameter rat-tailed file to make a shallow tapering U-shaped groove perhaps about 2 mm wide and deep on the forward edge, tapering off somewhat towards the rear (photo 08). The groove slopes downwards slightly from rear to front in order to accommodate the slightly different travel required for inside and outside rows.

I then glue a thin leather strip along the length of the wooden strip, taking care to press it firmly into the filed grooves (photos 09 and 10). However, before gluing the leather strip finally into place, it is worth doing a 'dry run' test assembly with the leather strip temporarily held in place with a bit of masking tape; this will soon allow you to see whether the grooves in the wood are deep enough. In practice, slight discrepancies in the pallet travel and the resting height of the buttons along the rows can be subsequently adjusted by bending the lever slightly using thin round-nosed pliers - something which you would probably need to do anyway, even without the leather strip.

Edited to add photos of modification to Hohner C/F Erica  
« Last Edit: January 11, 2012, 09:29:54 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal