Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Print your own melodeon  (Read 1545 times)

0 Members and 1 Guest are viewing this topic.

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Print your own melodeon
« on: January 13, 2012, 09:20:29 AM »

Logged
aka malodeon

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Print your own melodeon
« Reply #1 on: January 13, 2012, 10:47:17 AM »

We had some discussion about this technique a year or so back - wondered whether it would be suitable for reed blocks.
Have tried using the forum search facility but can't find the thread I was thinking of  :(

Subsequent edit - actually, it might have been on concertina.net
« Last Edit: January 13, 2012, 01:00:06 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nick Hudis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 334
  • Loffet Pro 18, Castagnari Casta
    • Themassageman
Re: Print your own melodeon
« Reply #2 on: January 13, 2012, 11:15:50 AM »

This is seriously the way technology is going to go in future.  I heard a Radio 4 programme in which they were talking about "printing" whole buildings, engines etc.  A melodeon should be easy in comparision.
Logged
Nick

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Print your own melodeon
« Reply #3 on: January 13, 2012, 11:52:42 AM »

The problems with this type of technology has been cost and the type of materials that could be used and the reason I posted this was that this points towards inexpensive and practical parts in the near future. As for me I still like wood.
Logged
aka malodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Print your own melodeon
« Reply #4 on: January 13, 2012, 11:57:44 AM »

I can see this technology has a great future, but....

I'm reminded of some of the technologies that were demonstrated on the BBC's Tomorrows World in the 60s, 70s and 80s which confidently predicted all sorts of things that were about to transform our world.  Funnily enough not all of them did. ;D  

This 3D printing technology has been around for a decade or so that I'm aware of, maybe longer, and I think it will take time for it to find the areas where it excels, and finds its natural home.   I can't see it replacing modern mass production technologies until it becomes capable of handling a much wider range of materials, and processes for forming them and controlling their properties.  Just take one example, reeds and their mountings:  these need to have very specific mechanical properties best fulfilled at present by spring steel for reed tongues, reed blocks in contrast need very different material properties and are currently made of wood or plastic.  3D printing is probably already capable of producing all the complex shapes required, but I believe it has a very long way indeed to go before it can handle materials with the right properties to make any but the simplest of usable artefacts.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeanman

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Print your own melodeon
« Reply #5 on: January 13, 2012, 01:05:43 PM »

Rep Rap is the Uk version, and now talk of printing PCBs and human organs!!!!
But for now how about a flue..   http://youtu.be/jlq5R84TlVw
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Print your own melodeon
« Reply #6 on: January 14, 2012, 03:20:53 PM »

I have a friend who uses these printed parts as protypes for small casing parts on the various electronic gizmos he builds.  They then become the plugs to make moulds for mass production.

I would have thought ABS might make a very satisfactory reedblock - but I guess you'd have to use that olivine(?) cloth and screws to attach and seal the valve plates as wax is unlikely to stick to the plastic.  It would still probably be cheaper for small scale production (which covers most accordions) to machine from solid.

Rob.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Print your own melodeon
« Reply #7 on: January 18, 2012, 12:11:18 PM »

I can see this technology has a great future, but....

I'm reminded of some of the technologies that were demonstrated on the BBC's Tomorrows World in the 60s, 70s and 80s which confidently predicted all sorts of things that were about to transform our world.  Funnily enough not all of them did. ;D  

This 3D printing technology has been around for a decade or so that I'm aware of, maybe longer, and I think it will take time for it to find the areas where it excels, and finds its natural home.   I can't see it replacing modern mass production technologies until it becomes capable of handling a much wider range of materials, and processes for forming them and controlling their properties.  Just take one example, reeds and their mountings:  these need to have very specific mechanical properties best fulfilled at present by spring steel for reed tongues, reed blocks in contrast need very different material properties and are currently made of wood or plastic.  3D printing is probably already capable of producing all the complex shapes required, but I believe it has a very long way indeed to go before it can handle materials with the right properties to make any but the simplest of usable artefacts.

I disagree in part. 3D print is already used in industry for rapid prototyping and for small scale production. At the Greenwich Early Music fair CMI was demonstrating cornetto mouthpieces printed in my department, as they were more accurate and cost effective than injected resin. The technology is there, resolution is getting higher and higher and costs are gradually coming down. It will be a consumer business, with the machine costing a small amount and the cassettes costing much, but within 10 years I think that we will all have one on our desk.

However, you are quite right in what you say about materials and processes. It is limited in what it can do in terms of microstructure, very important if you are printing out a substitute for wood, or metal reeds say. It does uniformity very well, but some things are impossible for it to print out. Similarly, it can only do solid objects, rather than assemblies. I can't see it (say) being able to build a decent working reedplate with reed attached.

What I'm excited about is things like whistles and woodwind instruments. It should be more than possible to print out a simple keyless clarinet on your printer, or something like the Lyon's plastic clarinet (but you would need to assemble yourself). This means that people can make durable, individual instruments themselves, meaning that instrument design could start to be influenced by the open source movement. That will be in the next 20 years though, rather than the next 10!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal