I was round at a mate's house last night and his box was audibly leaking (kept his left hand cool). The air button on his Saltarelle Boube wouldn't close. We pulled it apart and I was surprised to find that the pallet is on the inside of the board and worked OK with the end plate removed. It seems that the bit of ali plate used as a hinge for the button had taken on a set and, being rivetted in place can't be straightened without undue work. We bent the operating rod down a bit which has, for the moment, fixed the problem.
As a comparison we stripped my Trilly and the pallet is on the outside of the board and the button is hinged with a flap of leather. In addition there is a groove in the rear of the button to locate the lever.
I seem to recall that early models of the Dino Baffetti BP had persistent problems with the air valve pallet on the inside face - is that true? Long-term plan is to modify the button to be more like my Castagnari , or was that just the beer talking?
Discuss (takes you back to your schooldays...)
Rob.