Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Buttons popping off  (Read 6619 times)

0 Members and 1 Guest are viewing this topic.

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Buttons popping off
« on: January 30, 2012, 10:02:13 PM »

I know I need to lose weight, but I've got this other problem that I hope will be much easier to solve:

My D/G Sandpiper has a disconcerting habit of popping a button off the G row sometimes when I'm playing energetically. Not just the one button but any random button which will suddenly fly off during a session. It gets a good laugh, but last weekend it happened in a big session and I was lucky to retrieve it in the darkness.

I'm thinking about using superglue to stick them on permanently, but I'd like to ask if this could be a problem in the future. Is there a scenario where I might need to take the buttons off for repairs etc?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Buttons popping off
« Reply #1 on: January 31, 2012, 12:08:58 PM »

How are the buttons attached?  Screw in, glue on, or on the end of a steel rod?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Buttons popping off
« Reply #2 on: January 31, 2012, 09:39:21 PM »

The buttons are pushed on to steel rods. I just push them back on again after they've popped off.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Buttons popping off
« Reply #3 on: February 01, 2012, 05:12:44 PM »

Castagnari do the same - we spent quite a bit of last Friday's session trying to find one white button on the floor. Though this might have been in revenge for searching for my right hearing aid the week before, which I'd never actually had in that night.  :|bl
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Buttons popping off
« Reply #4 on: February 01, 2012, 06:30:49 PM »

I would use Gorilla glue or Epoxy. Just a tiny bit. SuperGlue does not "fill" and may not work well. 
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Buttons popping off
« Reply #5 on: February 01, 2012, 07:00:00 PM »

With epoxy it will definitely never come off, even with heat!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Roland Carson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 332
Re: Buttons popping off
« Reply #6 on: February 02, 2012, 03:13:11 PM »

Is that a good thing or a bad thing Theo ?
Roland
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Buttons popping off
« Reply #7 on: February 02, 2012, 04:21:08 PM »

Obviously depends on whether they need to come for for any reason.  I would favour something less permanent, pva, contact adhesive or superglue for example.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Hello

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 148
  • mmm
Re: Buttons popping off
« Reply #8 on: February 02, 2012, 04:59:42 PM »

How long have you had it?  It may be worth taking it back to where you bought it.
Even if this is a common trait among Sandpipers (I've no idea if it is or not) the fact that the buttons pop off means that the instrument could be deemed unfit for purpose.
Logged
Trying is the first step towards failing

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Buttons popping off
« Reply #9 on: February 03, 2012, 02:00:14 AM »

How long have you had it?  It may be worth taking it back to where you bought it.
Even if this is a common trait among Sandpipers (I've no idea if it is or not) the fact that the buttons pop off means that the instrument could be deemed unfit for purpose.

Unfortunately I live about 17,000 kms away from where I bought it, which rules out dropping in for a chat  (:)
I did ask that nice fellow Jon Loomes via email if he could send over a spare button to me, but that didn't happen.
Looks like a dab of superglue might be the best option now.
Logged

Hello

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 148
  • mmm
Re: Buttons popping off
« Reply #10 on: February 03, 2012, 09:57:26 AM »

Another option may be some PTFE tape wrapped around the rod which the button sits on. It might make the fit a bit tighter and wouldn't involve glue. You could try it on just one first and see if it worked.
Logged
Trying is the first step towards failing

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Buttons popping off
« Reply #11 on: February 03, 2012, 03:11:26 PM »

Didn't someone once recommend Loctite?

Baz
Logged
On the edge of Cheshire's Golden Triangle, apparently...

greybox1

  • Good talker
  • **
  • Offline Offline
  • Posts: 58
Re: Buttons popping off
« Reply #12 on: February 03, 2012, 03:44:15 PM »

I would be careful using super glue as it could react with the button and turn out to be a disaster
I would research this further. ???
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Buttons popping off
« Reply #13 on: February 03, 2012, 03:46:28 PM »

Your best bet would be a semi-permanent "breakable" wood glue, such as is used on violins.
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Buttons popping off
« Reply #14 on: February 03, 2012, 04:15:31 PM »

Your best bet would be a semi-permanent "breakable" wood glue, such as is used on violins.

Violin glue needs heat to undo it. If it's a plastic button you need to compare the melting points of button and glue...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Buttons popping off
« Reply #15 on: February 03, 2012, 04:25:12 PM »

I would be careful using super glue as it could react with the button and turn out to be a disaster

My experience of superglue is that it is much less likely to cause serious damage to plastics than is a solvent based glue where the solvents can cause softening.   In any case I would not worry because the quantity of glue you need is minute, it should get nowhere near the visible surface of the button and I'll repeat my advice to basically just use whatever is handy, but preferably not epoxy unless you want the joint to be completely permanent.

Your best bet would be a semi-permanent "breakable" wood glue, such as is used on violins.

Can't agree with that either.  Hide glue does not bond well with non-porous materials like metal or hard plastic.  It might help if you have nothing else available.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Buttons popping off
« Reply #16 on: February 03, 2012, 05:20:56 PM »

Didn't someone once recommend Loctite?

Loctite make a number of different "glues" for different purposes, but many of them fall within the superglue family.

Rob.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Buttons popping off
« Reply #17 on: February 03, 2012, 05:53:43 PM »

 Hide glue does not bond well with non-porous materials like metal or hard plastic.  It might help if you have nothing else available.

I don't really think this is entirely true.  It binds so well to glass it will chip it.
Logged

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Buttons popping off
« Reply #18 on: February 08, 2012, 10:37:21 PM »

If you glue your buttons on make sure you don't take them all off and get them mixed up, or individual differences in buttons will result in a row of buttons of varying heights. Of course any sensible person would only work on one button at a time.  Please don't ask me how I know this.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Buttons popping off
« Reply #19 on: February 23, 2012, 04:06:02 PM »

If you have patience, chewing gum may work! It sticks well to most surfaces, it can fill gaps, it is not permanent, but it needs a few days to harden...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal