Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass Fundamental Tuning Puzzle/Condundrum  (Read 1961 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Bass Fundamental Tuning Puzzle/Condundrum
« on: January 31, 2012, 04:50:14 AM »

I recently installed new bass fundamentals in my DG Erica thinking I'd get good quickly speaking bass notes, especially for the lowest C2 fundamentals, both push and pull. I've been opening up the gap more and more on the low C to try to get it not to choke during normal energetic playing for Morris dance and have finally managed to get a bit of reliability out of the note speaking on demand but it's not reliable, nor do I get the kind of volume the other melodeonists get from their instruments.

When I played the low pull C before, the note would take a second or two to come up to pitch from being -30 or so Hz flat. Given playing for Morris dancing, I'm only pressing the bass fundamentals for a fraction of a second rather than two or more seconds. As I've opened up the gap in the reed tip, I've also discovered that I now have a choice of whether that lowest C is in tune when I play gently or energetically for the Morris dances that I generally use the instrument for. I can't have both, unfortunately. If I tune the pull C2 especially, to play on pitch when I'm playing for my dancers, the pitch will be markedly sharp when played gently during normal practice sessions at home. I can retune to set the pitch lower for energetic playing in order to play on pitch at home but then it's out of tune when played for dancing. If I play for dancing at the same volume that I play when at home, I can't be heard over the sticks and the feet, nor can I hear my own playing. I don't know what to do about it. Any suggestions for how to deal with this one? Has anyone run into this kind of tuning problem before?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #1 on: January 31, 2012, 06:21:50 AM »

I've also had this problem in my double ray with Joe Burke bass. I think for the low C. My solution, that didn't really work, was to tape off the low reeds for all the basses. Then I switched to D/G.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #2 on: January 31, 2012, 09:21:14 AM »

Theo referred to this problem recently in another thread:
http://forum.melodeon.net/index.php/topic,8690.msg107766.html#msg107766

If I understand him correctly, the acoustic coupling between the low, middle and high bass reeds is important, both in helping the low reed to start properly, but also having some bearing in the control of the pitch stability of the low reed.

I suspect there is no straightforward answer and each instrument will behave slightly differently. You will need to seek solutions based on your own particular reeds and reed chamber dimensions. The reed gap will be important and, on the larger reeds, whether the longitudinal set of the reed is straight or curved/sigmoidal, whether the tip is weighted with brass or solder, and possibly also the material, dimensions and stiffness of the valves. Also I think there is a difference in behaviour between the push reeds and the pull reeds; the larger push reeds possibly being more prone to pitch variation at start-up, and the internal pull reeds rendered more stable possibly because they are in a confined reed chamber.

If it is any help, I have had to deal with the problem myself recently. On a D/G box with Voci Armoniche TAM reeds I have had some success by tuning the lowest bass reeds on the push C and push D fundamentals about 2 - 3 cents sharp. This seems to partly compensate for the otherwise flat start-up, after which the acoustic coupling with the higher reeds takes over and brings the low reed into a unison. This would seem to indicate that it is best to tune the middle and high bass reeds first (and get the gap/response correct too), and only then attempt the tuning of the low bass reeds. Also to tune the reeds in-situ, on the blocks, in the instrument.

In my opinion it is good to remember (a) all tuning involves compromise of some sort and (b) use a tuning device as an important aid, but be prepared to ignore it intelligently and ultimately use your ears.

Hope this helps,
Steve
(still relatively inexperienced in tuning, but learning, learning, all the time - Thank you once again Theo and Rees and others for all your advice in recent years/months!)

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #3 on: January 31, 2012, 12:07:42 PM »

I agree with what Steve says here.

I would just add that some Hohner bass reeds are better than others in pitch stability.  I don't know why, but I suspect it is to do with how well the reed is fitted to the slot, and on the lengthwise profile of the reed.

I seem to remember that I said somewhere that tuning bass reeds is a matter of finding the "least worst" option depending on your playing style.

Another possibility is to take the C reeds up by an octave.   C is usually the lowest bass reed in Hohners, so it puts it up to the top of the bass scale.  You might need to shift the other C bass reed up an octave too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #4 on: January 31, 2012, 04:45:27 PM »

 Something you could try is, instead of only putting glue on the first 3/8" of the low bass valve, try putting the glue on for an inch or so. This will reduce the amount of air passing through the reed, so should in theory improve the problem.

Another way might be to reduce the size of the air hole :o  (or what ever the technical term is) in the reed block by partially covering it with a piece of masking tape.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #5 on: January 31, 2012, 04:56:56 PM »

Something you could try is, instead of only putting glue on the first 3/8" of the low bass valve, try putting the glue on for an inch or so. This will reduce the amount of air passing through the reed, so should in theory improve the problem.

Another way might be to reduce the size of the air hole :o  (or what ever the technical term is) in the reed block by partially covering it with a piece of masking tape.

Are you saying a reduced air flow will help with both starting and getting the reed to come to a consistent pitch faster. That's interesting. Certainly an easier fix than filing all that steel off the reed to pitch it an octave higher, though I like that idea as well. The higher pitched fundamentals speak quickly and on pitch at dance volumes.

I'll try stopping down the hole first to see if that makes a difference.

Question: how does this all relate to chamber size? Would a larger chamber (deeper) make much of a difference? If it does make a difference, would it make the changes I need, essentially a faster on pitch start to the reed? I can add some small sticks to the edges of the chamber easily enough to make a larger volume of air in the chamber.

Steve and Theo, thanks for the pointers. I've been approaching the bass fundamentals by tuning the higher tenor reed first, getting the set of the reed right (though that's a moving target depending on playing pressure), then the pitch, then tuning the low fundamental next, then trying to get them to work together. I have experienced the two reeds pulling together in pitch but that takes two or more seconds for the lowest C reeds.

I'll keep playing with this.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #6 on: January 31, 2012, 05:01:05 PM »

Trouble with both of those methods is that you are restricting thexreeds air supply so although it might aleviate the choking of the reed when it starts it will tend to slow the reed coming up to its natural pitch. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #7 on: January 31, 2012, 05:10:17 PM »

Trouble with both of those methods is that you are restricting thexreeds air supply so although it might aleviate the choking of the reed when it starts it will tend to slow the reed coming up to its natural pitch. 

Yes, I missed out the bit about slow starting. I suppose with the reduced airflow the reed could be set lower, which would reduce the slow start up...It's all a bit of a balancing act.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Fundamental Tuning Puzzle/Condundrum
« Reply #8 on: January 31, 2012, 05:22:19 PM »

Trouble with both of those methods is that you are restricting thexreeds air supply so although it might aleviate the choking of the reed when it starts it will tend to slow the reed coming up to its natural pitch. 

Do I need more air flow? Have you ever opened up the palletboard hole to increase air flow?

I'll see what I can do with reed set some more, go back to the tenor reed and work on the set of that reed again though I haven't had any problems with the tenor reeds sounding whether I'm playing soft or loud.

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal