Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cleaning the celluloid and metal exterior  (Read 5664 times)

0 Members and 1 Guest are viewing this topic.

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Cleaning the celluloid and metal exterior
« on: February 06, 2012, 08:29:22 AM »

As a new member, I am seeking advice on the safest and best method of cleaning and polishing my accordions/melodeons.  I have become confused by the variety of suggestions both on this website and elsewhere on the internet: anything from using only soapy water with a soft cloth, to T-cut to using a flame thrower!.

I am seeking some sound advice, please.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Cleaning the celluloid and metal exterior
« Reply #1 on: February 06, 2012, 11:09:59 AM »

I'm sure you will find many different suggestions and opinions as it isn't just a single problem anyway.  A lot will depend on what the dirt is that you're wishing to remove.  In an ideal world soapy water used regularly would keep it clean, but if it has been some years, then you may have an accumulation of grease and dirt from the player's hands which will set like varnish!  I know, my thumbs have varnished both ends of my wooden boxes.

It is probably a good idea to start by considering that celluloid is a very long lasting finish.  It is applied to the casework by immersing it in acetone to soften it so it can be moulded to the shape.  So obviously acetone is unacceptable as a cleaner, because it will disolve the surface when you rub it.  I have had great success with iso propyl alcohol to cut through the grease and dirt, but whatever you use, it will leave the surface with a matt finish compared to a new box.  I would be delighted to hear of anyone finding a better solution, but I simply shine it up with furniture polish once it is clean.

Whatever you decide to use, experiment first on the back of the box!

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning the celluloid and metal exterior
« Reply #2 on: February 06, 2012, 11:21:42 AM »

I always start off with detergent on a cloth before using any solvent.  I usually use neat Cilit Bang sprayed onto a cloth and this will remove most sweat/beer/grime, then a wipe with a clean cloth moistened with clean water to remove all traces of the detergent.  The sticky residue left from stickers etc is usually resistant to this treatment.  The best solvent I've found that is safe on celluloid is lighter fuel an this seems to remove everything that the detergent leaves behind.

Avoid using the flamethrower. :o
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Cleaning the celluloid and metal exterior
« Reply #3 on: February 06, 2012, 02:32:56 PM »

WD40 on a bit of clean cloth does it fo me, first port of call any way, great for getting sticky labels off plastic too
Logged

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Cleaning the celluloid and metal exterior
« Reply #4 on: February 06, 2012, 05:40:07 PM »

Cheap aftershave from the pound shop is pretty good at getting sticky labels off.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Cleaning the celluloid and metal exterior
« Reply #5 on: February 06, 2012, 06:06:08 PM »

But then you run the risk of having a collection of accordions that smell like a recently divorced man at an over-50s speed dating event. ;D

I second lighter fluid.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Cleaning the celluloid and metal exterior
« Reply #6 on: February 06, 2012, 06:12:57 PM »

But then you run the risk of having a collection of accordions that smell like a recently divorced man at an over-50s speed dating event. ;D

Brilliant.  ;D

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Cleaning the celluloid and metal exterior
« Reply #7 on: February 06, 2012, 06:19:21 PM »

The best thing for removing sticky labels is sticky label remover (funnily enough!) - available dirt cheap in chain stationers, corner shops, pound shops, cheapo place like Wilkinsons.........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Cleaning the celluloid and metal exterior
« Reply #8 on: February 06, 2012, 06:32:56 PM »

 In my shop I use kerosene or Mineral spirits, these will not react with the celluloid, but will dissolve tape and sticker residue.
 To polish celluloid and clean off minor dirt, I use automotive polish/ fine scratch remover. This is not wax , it is the stuff you use to remove oxidized paint and fine scratches before you wax your car. It works really well on aluminium trim too.
 Be careful of white pearl celluloid, it is a layer of clear-ish pearl over a solid white background, you can go through it on corners of the instrument. You can fix it with pearlescent nail polish, as it is basically celluloid.

Kimric
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Cleaning the celluloid and metal exterior
« Reply #9 on: February 07, 2012, 05:11:31 AM »

I thank all who replied, with all your helpful suggestions.  I shall proceed to clean my boxes with caution starting at the unseen areas.  Firstly, I shall apply a slightly damp, soapy cloth, going easy on the water and drying out thoroughly.  Next, I shall apply a little lighter fuel to remove remaining dirt & grease.  Finally, I shall use T-cut to try to bring back colour and shine.  Does this seem a reasonable course of action?
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Cleaning the celluloid and metal exterior
« Reply #10 on: February 07, 2012, 11:45:06 AM »

Sounds good, but let's hope you don't need to go as far as the T-cut!

Rob.
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Cleaning the celluloid and metal exterior
« Reply #11 on: February 07, 2012, 03:07:52 PM »

And when you've done all those things you can give it a very light spray with a wax free furniture/multisurface polish and buff to a shine.....Or you could do it before and save a lot of hard work. ;)

Using T-cut will not restore the colour of faded perloid, just make it shinier.

Martyn
« Last Edit: February 07, 2012, 03:32:54 PM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal