Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stradella Bass mechanism worn out  (Read 3690 times)

0 Members and 1 Guest are viewing this topic.

NewShoe

  • Member
  • *
  • Offline Offline
  • Posts: 29
  • Roland fr-1 , Hohner nova 48
Stradella Bass mechanism worn out
« on: February 09, 2012, 04:16:29 PM »

I am looking for some advice about some options for my sick accordion.

It is a 48 stradella bass Hohner with a sticking g major chord.  After opening it up I see that  rod connected the g major button has become seriously worn where is slides in the frame. So much has worn off that the rod is contacting adjacent button rods and causing the sticking.   The other button rods are not in very good shape either.  If I could get new rods it doesn't look to hard to replace them. 

I was thinking I could buy another wornout (in the treble) accordion and switch bass mechanisms.  Or maybe switch to playing in the unfriendly key of F and develop a No G playing style.  This was not the most expensive accordion and maybe my repair money would be better used to buy a new accordion. 

Thanks for any ideas .

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Stradella Bass mechanism worn out
« Reply #1 on: February 10, 2012, 08:08:56 AM »

maybe my repair money would be better used to buy a new accordion. 

I think so.  But if you are lucky and find the same model with good bass the Hohner design will help.   By removing a few screws the whole bass mechanism can be lifted out and replaced.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

NewShoe

  • Member
  • *
  • Offline Offline
  • Posts: 29
  • Roland fr-1 , Hohner nova 48
Re: Stradella Bass mechanism worn out
« Reply #2 on: February 10, 2012, 01:02:16 PM »

Quote
But if you are lucky and find the same model with good bass the Hohner design will help.   By removing a few screws the whole bass mechanism can be lifted out and replaced.
.


Thanks,

That's the way it looked when I opened it but sometimes things are more complicated then they appear so I thought I would check first.   I'll keep my eyes open for suitable transplant donors.  Good news is that by knocking out some of the accumulated crud inside the accordion the bass is working a little better now.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Stradella Bass mechanism worn out
« Reply #3 on: February 10, 2012, 02:24:13 PM »

Hohner stradella bass machines usually stand up to use very well, even though some of the parts look flimsy.  You nay just need to straighetn the parts that are colliding.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

NewShoe

  • Member
  • *
  • Offline Offline
  • Posts: 29
  • Roland fr-1 , Hohner nova 48
Re: Stradella Bass mechanism worn out
« Reply #4 on: February 10, 2012, 03:41:24 PM »

Quote
You nay just need to straighetn the parts that are colliding.

I was a little intimidated by the number of parts in the bass machine, didn't want to make things worse.  But after looking at it a while it isn't so daunting.  Would it be best to pull the machine entirely out to tweak the rods ?  I could then soak the whole bass machine in something to clean it even better.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Stradella Bass mechanism worn out
« Reply #5 on: February 10, 2012, 04:21:36 PM »

  Would it be best to pull the machine entirely out to tweak the rods ? 
Not of you can see where the problems are.  you usually need everything in place to make adjustments and to ensure that you have play where it is needed, but not excessively so. 

Quote
I could then soak the whole bass machine in something.

Very bad idea!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

NewShoe

  • Member
  • *
  • Offline Offline
  • Posts: 29
  • Roland fr-1 , Hohner nova 48
Re: Stradella Bass mechanism worn out
« Reply #6 on: February 10, 2012, 06:18:32 PM »

Quote
Very bad idea!


Ok - no bath for the stradella.  All problem areas are on the outside rods so I don't need to take the machine out either. 


Thank you for the tips.

 I should be able to get a few more years out of this accordion with some tweaks.

Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Stradella Bass mechanism worn out
« Reply #7 on: February 16, 2012, 05:11:03 AM »

How old is the instrument?

 You could get one of similar vintage on E-bay ,and swap out the need parts.
 The bass machines of smaller models are usually cut down versions of the bigger ones. The bass machine separates out into two layers ,the bass being the deeper one.
 You can use parts out of your parts instrument and just swap out the rods that are bad. Just make sure you make sure the replacement one looks exactly like the old one. You can cut and modify the donor parts to match if needed.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

NewShoe

  • Member
  • *
  • Offline Offline
  • Posts: 29
  • Roland fr-1 , Hohner nova 48
Re: Stradella Bass mechanism worn out
« Reply #8 on: February 19, 2012, 01:50:21 AM »

Quote
How old is the instrument?

Its about seven years old.

I didn't think of using pieces of a donor bass machine.  That would allow me to look at using bass parts of larger accordions too.  The problem rods are on the outermost layer so it looks easy to replace if I run into a suitable donor. 

After looking at the problem I couldn't see a way to bring things into better alignment by bending as too there was just too much play in the bearing.  It looks like the parts were nickel ? plated steel and some of the plating flaked off and formed an abrasive pile at the base of the rod.  I should have cleaned things up a long time ago and prevented the wear.  Just a little rubbing alcohol and cotton swap removed the debris.  If I had done this annually as well as wiping out any dust the bass machine would be in great shape. 

At this point I don't have too much to lose so I put a tiny bit of grease between the two rubbing rods in the problem area only.  This is really working well for now.  But seeing how dust gets pulled through the bass it is probably a bad idea for long term use as it will likely create a mess later. 

Now I just need to look for a super cheap accordion for parts or a great deal on a replacement accordion.   

 
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Stradella Bass mechanism worn out
« Reply #9 on: February 19, 2012, 07:55:20 AM »

If this is a hohner bravo then this is a problem I have run into. The plating on the parts can be really rough, or flake off.
 I would knock off any loose plating on the friction areas of the rods, but try and avoid grease if you can.
 Try graphite , it is a bit messy, but won't make future repairs a problem. If the comb that the rod passes through is worn by the bad plating ,you can build it back up by making a shim out of card stock to take up the play. Set the shim in place (leave the rod out for the moment) and touch the shim with a drop of super glue (thick if you can get it) or if you are patient use wood glue. The paper shim should glue to the wood and fill in the wear. Use a paper clip or the like to press the shim in place.  Let it harden and you can file or sand the slot to size if needed.
 You can use a soft lead (graphite) pencil to apply graphite where it is needed, without making a mess.
 Polish the rod if you can, to prevent future wear.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal