Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: balsa reed blocks and a nod to Mr. Hyde  (Read 5299 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
balsa reed blocks and a nod to Mr. Hyde
« on: February 10, 2012, 09:47:43 PM »

After watching Mr. Hyde's reports on foam and balsa with peaked interest, and a few long distance discussions with him, I gave in to my curiosity and built an accordion out of instrument grade spruce with balsa reed blocks using Binci a mano reeds.  Even with the reports, I had a hard time having confidence that it would turn out well, but after initial tuning today, it has every bit as much volume as my hard maple blocks, and a very nice tone.

Stormy, hats off to you, you're a genius.  I've learned in my short career as a fledgling builder that accordions don't listen to human logic.

myhuckleberryfriend

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #1 on: February 10, 2012, 11:50:01 PM »

As it's made of balsa wood, it will float quite nicely should there be any flooding ..........
Logged
Hohner Pokerwork, Saltarelle Irish Bouebe

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #2 on: February 11, 2012, 12:52:00 AM »

Biggest immersion potential is beer.  :P

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #3 on: February 11, 2012, 03:30:44 PM »

So make certain this can never happen by drinking all the beer you can.  :|glug
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #4 on: February 11, 2012, 05:40:30 PM »

So make certain this can never happen by drinking all the beer you can.  :|glug

You are obviously a man of great wisdom and sacrifice.   ;D

myhuckleberryfriend

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #5 on: February 11, 2012, 07:07:18 PM »

Hear! Hear!

May the beer be of good quality and  stored at the right temperature.
Logged
Hohner Pokerwork, Saltarelle Irish Bouebe

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #6 on: February 11, 2012, 09:54:55 PM »

After watching Mr. Hyde's reports on foam and balsa with peaked interest, and a few long distance discussions with him, I gave in to my curiosity and built an accordion out of instrument grade spruce with balsa reed blocks using Binci a mano reeds.  Even with the reports, I had a hard time having confidence that it would turn out well, but after initial tuning today, it has every bit as much volume as my hard maple blocks, and a very nice tone.

Stormy, hats off to you, you're a genius.  I've learned in my short career as a fledgling builder that accordions don't listen to human logic.

What is the long term performance likely to be? As in changing blocks, re-waxing, retuning?  My worry would be that my experience of balsa (model airplanes) is that it crushes/deforms on handling.

Steve
Logged

MartinW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 202
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #7 on: February 11, 2012, 09:59:37 PM »

May the beer be of good quality and  stored at the right temperature.

Careful, discussing the right temperature for beer is a surefire way to start an international argument.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #8 on: February 11, 2012, 11:00:10 PM »

Steve, long term is my concern also, now that I know they perform well.  I had no problems tuning because I knew they were balsa, but someone who didn't know, and tried to pry on one, would definitely reshape things.

I don't intend to do much of it, but so many people in my area seem interested in light accordions I wanted to see how light I could make one.  So it will just be there as an option.  With the spruce and balsa, she's sure a light one. 

myhuckleberryfriend

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #9 on: February 11, 2012, 11:08:36 PM »

 >:E !!!
Logged
Hohner Pokerwork, Saltarelle Irish Bouebe

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #10 on: February 11, 2012, 11:53:10 PM »

Just wondering...  Did you varnish the reedblocks?

Rob.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #11 on: February 12, 2012, 03:57:28 AM »

I lacquered them, several coats.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #12 on: February 12, 2012, 01:58:28 PM »

Steve, long term is my concern also, now that I know they perform well.  I had no problems tuning because I knew they were balsa, but someone who didn't know, and tried to pry on one, would definitely reshape things.

I don't intend to do much of it, but so many people in my area seem interested in light accordions I wanted to see how light I could make one.  So it will just be there as an option.  With the spruce and balsa, she's sure a light one. 

I think it's really great that you actually went through with this experiment!

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #13 on: February 12, 2012, 06:25:06 PM »

Hi Bryan and all,

Agreed with Andy, great job undertaking the experiment!  And I would also share the concerns about toughness over time.

Here's an idea I've had for a long time.  I have never worked with this wood much because we don't see it much in the US, but I love the results you can hear from its use in traditionally-made concertinas.  Has anyone tried solid European sycamore* (Acer pseudoplatanus) for the plates and reedblocks of a lightweight 1-row box -- or maybe for the whole instrument? 

I don't know how easy it is for US builders to find good wood of this species, however though it's native to the old world it does grow as a naturalized exotic here, for example on Cape Cod, MA.  But it should be available to European builders and to the world via European sources for instrument wood.

* NB that in the US most people use the common name "sycamore" to refer to the plane tree, genus Platanus, which has also sometimes been used for instrument building.

PG
Logged

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #14 on: February 12, 2012, 06:54:31 PM »

I've not made melodeons from it but have used it for whistles, bagpipes, and a baroque bassoon, it works well. Sycamore is quite similar to maple although a bit lighter, at least compared to rock maple.

For the technical data:
http://www.wood-database.com/lumber-identification/hardwoods/sycamore-maple/
http://www.wood-database.com/lumber-identification/hardwoods/hard-maple/

http://www.wood-database.com/wood-articles/differences-between-hard-maple-and-soft-maple/

Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #15 on: February 12, 2012, 10:03:11 PM »

I've not made melodeons from it but have used it for whistles, bagpipes, and a baroque bassoon, it works well. Sycamore is quite similar to maple although a bit lighter, at least compared to rock maple.


It turns better than it cuts, slow speed and as coarse a blade as you can get away with is needed for cutting.

Steve
Logged

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #16 on: September 09, 2012, 11:17:59 AM »

After watching Mr. Hyde's reports on foam and balsa with peaked interest, and a few long distance discussions with him, I gave in to my curiosity and built an accordion out of instrument grade spruce with balsa reed blocks using Binci a mano reeds.  Even with the reports, I had a hard time having confidence that it would turn out well, but after initial tuning today, it has every bit as much volume as my hard maple blocks, and a very nice tone.

Stormy, hats off to you, you're a genius.  I've learned in my short career as a fledgling builder that accordions don't listen to human logic.

What is the long term performance likely to be? As in changing blocks, re-waxing, retuning?  My worry would be that my experience of balsa (model airplanes) is that it crushes/deforms on handling.

Steve
Thank's for your kind words Bryan, I'm glad it worked for you.
Where possible I have gone right over to foam as it is half the weight of the better balsa wood, and it gives a better frequency response. So much so if one of my older balsa reed block models comes anywhere near my workshop, I do a quick swop over to foam, and the customer is never disappointed with the result.

As far as wear and tear is concerned the foam is very good at taking the odd screw driver under the reed plates to pry them off, another good thing it has a memory, so where I have put a dingle into the frame where I have laminated over the top I have found that dingle to completely return to normal after a few weeks or so, making it ideal for those drunkards who play and dance at the same time.

Stormy
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #17 on: September 09, 2012, 01:02:10 PM »

Is this the foam that you mix yourself, or does it come in sheets?

I had a go with the mix-it-yourself stuff a number of years ago, for car body repairs. did the job but stuck to everything in sight. Including me.
Easy to sand and shape but maybe a bit coarse cell structure for box building.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #18 on: September 10, 2012, 11:23:11 AM »

Is this the foam that you mix yourself, or does it come in sheets?

I had a go with the mix-it-yourself stuff a number of years ago, for car body repairs. did the job but stuck to everything in sight. Including me.
Easy to sand and shape but maybe a bit coarse cell structure for box building.

The foam (klegercel) is what is used in boat building as it is used between the fiberglass layers, it comes in sheets from 2 mm up to 25mm that I know of, and i think it goes up in 1mm graduations.

The good thing about it is that you can use normal PVA wood glue on it, it will go through a thickness er sander without burning (you cannot say that about some timbers) you can use a router on it and it cuts well and you can even plane it with a hand plane.
In the sheet form it is very floppy, but as soon as you put a veneer on either side it stiffens right up.

The only disadvantage with it is that it is expensive to use as all structural surfaces on the instrument have to be veneered on either side, so this is time consuming and the glue takes longer to dry, but it makes great reed blocks and pallets as all can be machined in a jiffy, and the stability of it is far superior to timber, as it is not effected by moisture or heat.

By using balsa I cut the weight of my aluminum pallets down by 2/3rds and then the foam came in 1/2 the weight of balsa.

Stormy 
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: balsa reed blocks and a nod to Mr. Hyde
« Reply #19 on: September 10, 2012, 11:34:15 AM »

I seem to remember a UK HiFi manufacturer making a pair of speakers from that stuff in the 80s (Wharfedale 708s?) - fibreglass or polycarbonate foam sandwich with a silver birch veneer - Strasser made a Steirische using it with carbon fibre or fibreglass for the casewor .. 

As far as I know, Wharfedale didn`t make any more speakers from it (though they were possibly the best large bookshelf speakers they made) and Strasser seem to only decorate their boxes with carbon fibre nowadays
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal