Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5 6   Go Down

Author Topic: Reed Block Acoustics  (Read 30133 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #40 on: February 19, 2012, 12:06:30 PM »

But opinions is all any of us really have, actually it's more theories with a few opinions thrown in. ;D

True, but some of those theories are based on genuine understanding of material science and acoustics  ;)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Reed Block Acoustics
« Reply #41 on: February 19, 2012, 06:26:15 PM »

Thinking further, do you need to use bellows at all?  What we are after is a constant airflow so would a fan (suitably ducted) be sufficient?

Steve
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #42 on: February 19, 2012, 07:14:41 PM »

Simulating the air flow sounds easy, but whether it can be done in a sensible amount of computing time is the issue. According to the simulation software manufacturers their software is perfectly capable of simulating the chips we're designing, but to do this in enough detail would take years of real time (on a 128-CPU cluster) to get useful results; if you simplify the simulation to the point where it runs in useful time, you discard exactly the details that you're looking for. It's the kind of scale of problem that jet engine manufacturers have to deal with, and they have rather large budgets (both time, effort, money and supercomputers). Maybe if I could get access to the Fujitsu K supercomputer ('cos I know the engineers who designed it, in fact I met them last week at an award ceremony in Japan) this could be overcome, but I somehow think the Japanese government has first call on it...

That isn't my area, but I agree that this would be an expensive route to take. And I don't think it's strictly necessary at this level. I think that a lot of conclusions can be drawn by measuring rather than simulating, once we have a better idea of what might be going on then it might be a good idea simulate... and by then the technology might have moved on. No point throwing money at something unless you know what to look for.

Quote
So you're down to building stuff and measuring/listening to it. You don't need an anechoic chamber for free-reed measurements, a cardioid mic placed a few inches away will reject room reflections almost completely. But you do need someone to spend a lot of time building stuff with different materials/construction and this is where the time/effort would go; compared to this doing the measurements is easy.

You're probably right re: the chamber. My friend is using an anechoic chamber because he has quite a complex sound and needs to get rid of room hum and the compressors in the floor below... whoever decided that the appropriate place to put an acoustics lab was above the compressors and below the supersonic wind tunnels was an idiot. But you are right that probably with a free reed that won't be necessary. And I'd say that once you know how to do them the measurements are easy - the trick is getting to that stage, especially if you were doing something from scratch. It takes a long time to get decent measurements out of a system. But if you already know what you are doing (as I am finding out now) then you can whiz through them like anything.

Quote
Also doing anything significantly different in reed/frame construction in particular is a lot of work, the machinery is built to make standard reeds in standard frames so anything else has to be either done by hand (the old way) or using CAD/CAM machining (the new way). If I remember correctly there was one paper only about a new way of making high-frequency reeds with better volume and tone by shaping the reed and/or frame, and just this was a 3-year PhD.

Agreed. I think that investigating current systems of mounting and so on is very straightforward, but as soon as you start looking at the reeds themselves then things get very difficult. But if you use a standard reed then there is still a lot that you can conclude.

Quote
I'd love all this to happen and be taken seriously but it would need a university engineering department to drive it, and multiple postgraduate students to work on it over several years. Anyone know any suitable heads of department who play melodeon?

As I said, Cambridge might well be up for it, the problem is money. Finding a sponsor would be tricky, department funding is very competitive and few have the money to self fund themselves.

Thinking further, do you need to use bellows at all?  What we are after is a constant airflow so would a fan (suitably ducted) be sufficient?

This is what I was suggesting, a compressed air supply, a proportional valve (or similar) and a duct to the reed. Controllable and repeatable.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Reed Block Acoustics
« Reply #43 on: February 19, 2012, 07:22:45 PM »

This thread is most interesting to me as I have started an Open University Technology of Music Course and this discussion seems in point.  I shall bookmark it and return to it when (if) I learn something from the course.

Thats a fun course; I did it last year. Its very weighted to the music side though,lacks the serious physics/engineering rigour. The tutors are free reed friendly. I took my concertina to a day school at Milton Keynes and there were other free reeders there. Used it for the final examined assignment too.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Reed Block Acoustics
« Reply #44 on: February 19, 2012, 08:24:23 PM »

Maybe if I could get access to the Fujitsu K supercomputer ('cos I know the engineers who designed it, in fact I met them last week at an award ceremony in Japan) this could be overcome, but I somehow think the Japanese government has first call on it...
said it would be interesting if the Japanese got involved, mory

Thinking further, do you need to use bellows at all?  What we are after is a constant airflow so would a fan (suitably ducted) be sufficient?

This is what I was suggesting, a compressed air supply, a proportional valve (or similar) and a duct to the reed. Controllable and repeatable.

Maybe a good place to start might be to get some measurement for air pressures likely to be created from your average player with average reeds, average bellows, playing in an average manner at the point of exit into an average reed chamber etc etc I think you would encounter a huge range of variables in this area alone and you'd have to use a tanked air source as any one who has played near a ceiling fan or a cooling fan will tell you and I'm sure your aware, it plays havoc with the air pressure, it fluctuates and the reed responds accordingly, you would also encounter the moisture aspect of compressers so you'd have to filter as well or not AtB mory
« Last Edit: February 19, 2012, 08:30:28 PM by mory »
Logged

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Reed Block Acoustics
« Reply #45 on: February 19, 2012, 09:20:21 PM »

This thread is most interesting to me as I have started an Open University Technology of Music Course and this discussion seems in point.  I shall bookmark it and return to it when (if) I learn something from the course.

Thats a fun course; I did it last year. Its very weighted to the music side though,lacks the serious physics/engineering rigour. The tutors are free reed friendly. I took my concertina to a day school at Milton Keynes and there were other free reeders there. Used it for the final examined assignment too.

I am pleased to hear from someone else who has attended this course and has some similarity of interests to myself. I feel that I shall find the mathematics/physics elements a bit daunting as I haven't undertaken any serious study for many years and maths. was never my forte.

From the comments on this thread I now feel that I shall be unlikely to add anything from the Technology of Music course to the wealth of knowledge that obviously exists here already, and instead I shall concentrate on enjoying the course as you did, and learning about the melodeon/accordion in a more relaxed fashion, as perhaps it should be.  Keep in touch.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #46 on: February 19, 2012, 11:54:56 PM »

Maybe a good place to start might be to get some measurement for air pressures likely to be created from your average player with average reeds, average bellows, playing in an average manner at the point of exit into an average reed chamber etc etc I think you would encounter a huge range of variables in this area alone and you'd have to use a tanked air source as any one who has played near a ceiling fan or a cooling fan will tell you and I'm sure your aware, it plays havoc with the air pressure, it fluctuates and the reed responds accordingly, you would also encounter the moisture aspect of compressers so you'd have to filter as well or not AtB mory

Well the lab has a compressed air supply which is filtered. It would be much more of a problem if you didn't have that facility. I don't think that you would necessarily need to measure air pressure from players, a few calculations should give you an order of magnitude and it wouldn't be difficult to put the thing together and vary the pressure such that it sounds well and to find the bounds within which it does.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed Block Acoustics
« Reply #47 on: February 20, 2012, 07:57:06 AM »

you'd have to use a tanked air source as any one who has played near a ceiling fan or a cooling fan will tell you and I'm sure your aware, it plays havoc with the air pressure, it fluctuates and the reed responds accordingly

Aside: I'm pretty certain that the objectionable fluttering effect you get when playing near a fan is caused by reflections of the sound off the blades interfering with the direct sound, not by modulating the air pressure supplied to the reeds.

Nevertheless I agree that you need a controlled source of air pressure for useful measurements, and it would be useful to know what pressures are generated inside a typical instrument.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Reed Block Acoustics
« Reply #48 on: February 20, 2012, 08:11:07 AM »

you'd have to use a tanked air source as any one who has played near a ceiling fan or a cooling fan will tell you and I'm sure your aware, it plays havoc with the air pressure, it fluctuates and the reed responds accordingly

Aside: I'm pretty certain that the objectionable fluttering effect you get when playing near a fan is caused by reflections of the sound off the blades interfering with the direct sound, not by modulating the air pressure supplied to the reeds.

Nevertheless I agree that you need a controlled source of air pressure for useful measurements, and it would be useful to know what pressures are generated inside a typical instrument.

Not so sure about reflection, I can understand why you might think so with a large blade ceiling fan but, you get the same effect with a six inch blade cooling fan at a variety of speeds but, generally seems more so when facing at the box, I'm thinking of the release pressure from the reeds not the imput pressure, maybe about turbulence? still the proof is in the science so I'll leave it to those that wish to prove or disprove it. All the Best mory
« Last Edit: February 20, 2012, 12:31:02 PM by mory »
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed Block Acoustics
« Reply #49 on: February 20, 2012, 05:23:22 PM »

As a builder I do not worry too much about what to make my reed blocks from. My personal choice is alder: it works easily, it is stable, resistent and not too heavy, glues well. It is also relatively inexpensive. I also used abachi in two or three batches, but continuous exposure to its dust may lead to health issues...
My priorities: Sound improves noticeably when the blocks are glued straight on the board (no bottom, no gasket, no screws). Large sound holes. Following this simple recipe you should get more or less the same result as with flat mounted reeds.

Are reed blocks that are glued to the soundboard the standard type of reed block that stand up or are you referring to flat mounted reeds?Would you provide photos of your blocks that are glued straight on the board please?

Thanks!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed Block Acoustics
« Reply #50 on: February 20, 2012, 08:18:50 PM »

« Last Edit: February 20, 2012, 08:22:53 PM by diatonix »
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed Block Acoustics
« Reply #51 on: February 20, 2012, 08:43:57 PM »

@Telemorris:
 https://www.facebook.com/media/set/?set=a.1314690187123.2040831.1226742509&type=3#
(Album #1  picture 66)

Olav, Thanks for the links to your photos. One further question (I hope). How do you seal your reeds to the blocks? There's very little room for waxing. Do you use a special tool for waxing the reeds in?

Thanks!

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #52 on: February 21, 2012, 01:00:46 AM »

Whilst we're on the subject of asking diatonix for stuff, I would love to see details of his register mechanisms... :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

bender

  • Member
  • *
  • Offline Offline
  • Posts: 5
    • Pitch Bending for Free Reed Instruments
Re: Reed Block Acoustics
« Reply #53 on: April 05, 2012, 03:12:07 PM »

I just came across this thread and found it interesting, and I also enjoyed the open mindedness and curiosity from the posters.  It's not a very old thread, so I can perhaps chime in, though I don't mean to re-hash a lot of worn topics.  

Concerning vertically mounted, tapered reed blocks, I was surprised to find no post that put forward the simplest explanation for why they are tapered.  If the vertically mounted blocks were not tapered, the vibrating reed tongues would collide with the reeds on the face of the adjacent block.  Therein, I think, lies the simple, practical reason.  I think it has little to do with acoustics, air flow, or reed response, and more to do with the necessity of cramming vibrating reeds into a confined space.    

In a little more detail, the pitch (distance) between reeds is determined primarily by the keyboard - the spacing between keys.  Here, convenience to the musician is paramount.  This pitch also primarily serves to define the width of the reed plates, and of course, the port hole, through which air passes to and from the reed.  For circular holes, then, this pitch also primarily fixes the minimum distance between reed blocks.  I do believe that we'd like this hole to be as large as possible, in order not to restrict air flow, but also to allow sound energy to escape.  Thus, one might try to increase this flow area by the use of rectangular holes, but with rectangles, and with the dimension between reed blocks variable, the issue is one of diminishing returns.  This distance is also constrained by the consequences to overall size and weight of the instrument.  Thus, we must settle for more or less square holes.

With the cross section of the air port now determined, and with vertically mounted blocks, it is now imperative that the blocks taper towards the top, and that the largest reeds be mounted "tip up," if the blocks are to be packed as tightly as possible.  Tight packing is of course a requirement for small, lightweight construction of the entire instrument. The largest reeds determine the taper simply because they are the ones with the largest swing during vibration.  (I don't see anything to gain by mounting the reed blocks along non parallel lines.)  With such a geometry, the smallest reeds can be mounted either tip up or tip down, simply because their swing is so small.  As some posters have noted, some small reeds are mounted tip down, and my feeling is that this is better, whenever possible, because the mounting will likely result in louder, more responsive reeds, as in flat mounted reed blocks.  Of course, there's a danger here in introducing non-uniform timbre in the sound of the reeds, moving along the keyboard.  My gut feeling is that such a danger is of little concern, simply because the (hearable) number of overtones of the smallest reeds are so small that their sound is close to sinusoidal to start with.  In rare instances, a tip down mounting is necessary in order to prevent the choking caused when the reed cavity length is too close to 1/4 wave resonance.  But such choking can be dealt with in other ways.  

I realize there were other issues covered in this thread, but I don't have the time right now to look more carefully into it, and I'm not sure if this message on an old thread will even be regarded.    

Best regards,
Tom
« Last Edit: April 05, 2012, 03:25:24 PM by bender »
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Reed Block Acoustics
« Reply #54 on: April 05, 2012, 04:08:22 PM »

Welcome Tom interesting comments and yes definitely overlooked aspects regarding proximity. Great to have you on board, your work is much admired by some here and your technical expertease will certainly be a boost to some of the exchanges. All the Best mory
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed Block Acoustics
« Reply #55 on: April 05, 2012, 04:49:24 PM »

Interesting indeed.
I have recently been putting together a melodeon out of parts of other boxes, and experimenting with the reedblocks. The bass side of a Pokerwork-type box can represent challenges with the old and big 'T' Hohner plates, and other that are even thicker, like the Cagnoni Macchina.  In some cases the rivets from the plates on the two reedblocks almost touched each other! Putting some tip down was the only option, and did not seem to affect the sound negatively.

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #56 on: April 07, 2012, 03:24:06 PM »

I just came across this thread and found it interesting, and I also enjoyed the open mindedness and curiosity from the posters.  It's not a very old thread, so I can perhaps chime in, though I don't mean to re-hash a lot of worn topics.  

Hi Tom, you are certainly very welcome here! And I have no objection to my thread being revived. As you will see, no conclusion was reached particularly with the difference between flat and block mounted reeds, so it isn't a worn topic at all! Thanks for your comments, it may well be so that the principle reason of tapering the chambers is the reed travel, although I remain convinced that the airflow has something to do with it. Did you think that my summary (esp of your article) in the first post was meaningful?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed Block Acoustics
« Reply #57 on: April 07, 2012, 04:08:47 PM »

Little quote from Frans van der Aa on Facebook

  I find again (and again) a better way to make the perfect reed blocks.

  http://www.youtube.com/watch?v=lNu6bYCfd7w

Seems I'll find out in November  8)
« Last Edit: April 07, 2012, 04:11:11 PM by Chris Ryall »
Logged
  _       _    _      _ 

bender

  • Member
  • *
  • Offline Offline
  • Posts: 5
    • Pitch Bending for Free Reed Instruments
Re: Reed Block Acoustics
« Reply #58 on: April 08, 2012, 12:34:39 AM »

Hi Ukebert, In your paragraph, I think you captured many of the key ideas I tried to get across in my paper, and I'm glad they were communicated.  Although I may be overlooking something, I see no reasonable physical basis for the claim that airflow considerations explain the reason for the taper in vertically mounted reed blocks. 

I am curious, are you reasonably convinced that flat mounted reed blocks sound differently than vertically mounted ones?  If so, do you prefer the sound of one over the other? 

Best regards,
Tom

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed Block Acoustics
« Reply #59 on: April 08, 2012, 08:02:38 AM »

Kept out of this as I don't 'make' .. but it seems obvious to me that ...  ;)

  • Tapered block = tapered resonance chamber behind the plate.  In most instruments this has massive consequences, for examples organ pipes are segregated into straight and tapered sets, and the lovely (or otherwise) tone of a clarinette has (I'm told by makers) all to do with geting the taper just right on their reamer
    .
  • It's common to treat the block as an 'infinite mass' in accoustic terms (ie forget it), but that ain't the case? There is massive coupling from the action/reaction at the base of reed, and we've dicussed how without a coupling strap between blocks, the tone can go t1ts up on some notes. That coupling into block/box is so strong on my Gaillard that I feel the keyboard vibrate when playing low notes ..  makes it a second "sounding" board (as opposed to fondo)!  I think BG has made it super thin for that effect. Makes such a lovely hollow sound as you tap, that I considerered Carty style 'percussive' play for a while, though (as on guitar), I'm no Carty

That'll be 2p please  :|glug

you'd have to use a tanked air source as any one who has played near a ceiling fan or a cooling fan will tell you and I'm sure your aware, it plays havoc with the air pressure, it fluctuates and the reed responds accordingly
Aside: I'm pretty certain that the objectionable fluttering effect you get when playing near a fan is caused by reflections of the sound off the blades interfering with the direct sound, not by modulating the air pressure supplied to the reeds.
edit Anyone remember Dick Nudds playing his "ol tremelodeon" in the 80's  - had a tiny bellow pressure fan inset AFAIR. Wacky and definately 'modulated'
« Last Edit: April 08, 2012, 08:13:57 AM by Chris Ryall »
Logged
  _       _    _      _ 
Pages: 1 2 [3] 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal