Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5 6   Go Down

Author Topic: Reed Block Acoustics  (Read 30068 times)

0 Members and 1 Guest are viewing this topic.

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Reed Block Acoustics
« Reply #60 on: April 08, 2012, 09:53:37 AM »

Quote[ That'll be 2p please ]

you haven't allowed for inflation  ;)
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed Block Acoustics
« Reply #61 on: April 08, 2012, 10:13:28 AM »

Oooh yes I have! - play mostly on the pull  ;D

 .. off to Sheffield for their "Sessions Festival"  :|glug
Logged
  _       _    _      _ 

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #62 on: April 08, 2012, 12:03:53 PM »

Kept out of this as I don't 'make' .. but it seems obvious to me that ...  ;)

  • Tapered block = tapered resonance chamber behind the plate.  In most instruments this has massive consequences, for examples organ pipes are segregated into straight and tapered sets, and the lovely (or otherwise) tone of a clarinette has (I'm told by makers) all to do with geting the taper just right on their reamer
    .
  • It's common to treat the block as an 'infinite mass' in accoustic terms (ie forget it), but that ain't the case? There is massive coupling from the action/reaction at the base of reed, and we've dicussed how without a coupling strap between blocks, the tone can go t1ts up on some notes. That coupling into block/box is so strong on my Gaillard that I feel the keyboard vibrate when playing low notes ..  makes it a second "sounding" board (as opposed to fondo)!  I think BG has made it super thin for that effect. Makes such a lovely hollow sound as you tap, that I considerered Carty style 'percussive' play for a while, though (as on guitar), I'm no Carty

That'll be 2p please  :|glug

you'd have to use a tanked air source as any one who has played near a ceiling fan or a cooling fan will tell you and I'm sure your aware, it plays havoc with the air pressure, it fluctuates and the reed responds accordingly
Aside: I'm pretty certain that the objectionable fluttering effect you get when playing near a fan is caused by reflections of the sound off the blades interfering with the direct sound, not by modulating the air pressure supplied to the reeds.
edit Anyone remember Dick Nudds playing his "ol tremelodeon" in the 80's  - had a tiny bellow pressure fan inset AFAIR. Wacky and definately 'modulated'

Sorry Chris but I have to disagree, you're doing the same extrapolating-from-very-different-instruments thing that always kicks off the "soundboard" discussions ;-)

The bore taper in wind instruments (organ pipes, clarinets) is critical because it has a very strong effect on the acoustics, the bore is comparable to a sound wavelength and is responsible for the resonances that produce the sound.

The cavity taper in reed blocks is not in any way comparable because the chambers are far too short and not resonant, see Tom Tonon's paper about reed block acoustics.

I do agree that treating the block as a rigid "infinite mass" is wrong for melodeons, hence the coupling straps. However you can build a melodeon in a way which is much closer to the ideal case, see the "A New Maker in England" thread... :-)

Ian

P.S. AFAIK the Kipper's "Tremelodeon" was just tuned with a ludicrous amount of tremolo, no fans were involved.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed Block Acoustics
« Reply #63 on: April 08, 2012, 12:48:52 PM »

Ah, so the melodeon fourier is a pure sine wave? No harmonics. That explains why the chamber makes no difference  ;)  And that vibration of the fingered is reflected off the fan?
Logged
  _       _    _      _ 

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #64 on: April 08, 2012, 01:02:20 PM »

Ah, so the melodeon fourier is a pure sine wave? No harmonics. That explains why the chamber makes no difference  ;)  And that vibration of the fingered is reflected off the fan?

Nope, plenty of harmonics. But go and work out what the resonant frequencies for melodeon reed chambers are, then you can conclude why they have little or no effect except maybe on the very highest reeds -- and why resonances are almost certainly a bad thing, not a good one (narrow-band high-Q resonances at almost-random frequencies which suck energy out of the reed are never a good idea). Tom Tonon's paper goes into this in detail.

Reed block cavities are tapered (if they are) to give the reed and valve room to swing while minimising the enclosed air volume. Resonance has little or nothing to do with it, again see Tom's paper.
« Last Edit: April 08, 2012, 01:10:36 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #65 on: April 08, 2012, 05:26:03 PM »

Hi Ukebert, In your paragraph, I think you captured many of the key ideas I tried to get across in my paper, and I'm glad they were communicated.  Although I may be overlooking something, I see no reasonable physical basis for the claim that airflow considerations explain the reason for the taper in vertically mounted reed blocks.

I'll freely admit that I know little about the subject. I should do, I have an exam on Aeroacoustics in less than three weeks which has lots of applications to box design, but as of yet I know none of it. What I do not know is whether the flow of the air has any noticeable affect on the sound. Or rather, I know that it does, since cassotto instruments sound so distinct, but to what extent? If we imagine two reeds mounted at 45 degrees and minus 45 degrees from  the vertical, meaning that the chambers are a triangle and a trapezium, the airflow is going to be very different in each of them. Does this make a difference? This is what I am not sure about, as I admittedly can't think of a mechanism. But then my problem at the moment is that I am struggling to understand what does make a definite difference, i.e. what makes a good reed or a good reedblock.

Quote
I am curious, are you reasonably convinced that flat mounted reed blocks sound differently than vertically mounted ones?  If so, do you prefer the sound of one over the other? 

No. I am convinced that my flat mounted box sounds very different to my block mounted box :P Which as you know isn't quite the same thing. diatonix on this thread has suggested that the difference is down to the fact that flat mounted reeds tend to be mounted on pans glued to the fondo, whereas blocks tend to be clamped to gaskets, which allow the block to move (c.f. reedblock straps). However my little box has a flat mounted pan clamped to the fondo, the other voice being glued.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

bender

  • Member
  • *
  • Offline Offline
  • Posts: 5
    • Pitch Bending for Free Reed Instruments
Re: Reed Block Acoustics
« Reply #66 on: April 08, 2012, 06:43:46 PM »

If we imagine two reeds mounted at 45 degrees and minus 45 degrees from  the vertical, meaning that the chambers are a triangle and a trapezium, the airflow is going to be very different in each of them. Does this make a difference?

In the operation of reeds, there's a great distinction between the steady, or time averaged, or mean flow of air and the oscillatory (unsteady, or time dependent) vibrations produced in the air.  It seems to me you are visualizing and focusing only on the mean flow of the air.  It is the air vibrations that give rise to the sound we here, and thus, it's this motion that we need to focus on if we are to understand how different reed blocks influence sound.  This oscillatory motion is governed by concepts that are absent from a purely steady state treatment. 

Trying to understand the sound of a reed by focusing only on the mean, steady flow is like trying to understand the operation of Alternating Current circuits through application of only Direct Current concepts.  In the analogy, we understand clearly that capacitors and inductors, for instance, behave very differently to AC current than they do to DC current.  DC current cannot pass across a capacitor, whereas AC current can.  An ideal inductor behaves as a short circuit to a DC current, whereas it supplies an electrical inertial resistance to an AC current. 

Acoustics is an inherently unsteady (time dependent) phenomenon, and if you leave out this feature, you lose everything that explains how the reed is able to generate sound. 

Best regards,
Tom

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #67 on: April 08, 2012, 07:09:24 PM »

If we imagine two reeds mounted at 45 degrees and minus 45 degrees from  the vertical, meaning that the chambers are a triangle and a trapezium, the airflow is going to be very different in each of them. Does this make a difference?

In the operation of reeds, there's a great distinction between the steady, or time averaged, or mean flow of air and the oscillatory (unsteady, or time dependent) vibrations produced in the air.  It seems to me you are visualizing and focusing only on the mean flow of the air.  It is the air vibrations that give rise to the sound we here, and thus, it's this motion that we need to focus on if we are to understand how different reed blocks influence sound.  This oscillatory motion is governed by concepts that are absent from a purely steady state treatment. 

Trying to understand the sound of a reed by focusing only on the mean, steady flow is like trying to understand the operation of Alternating Current circuits through application of only Direct Current concepts.  In the analogy, we understand clearly that capacitors and inductors, for instance, behave very differently to AC current than they do to DC current.  DC current cannot pass across a capacitor, whereas AC current can.  An ideal inductor behaves as a short circuit to a DC current, whereas it supplies an electrical inertial resistance to an AC current. 

Acoustics is an inherently unsteady (time dependent) phenomenon, and if you leave out this feature, you lose everything that explains how the reed is able to generate sound. 

Best regards,
Tom

This could be one reason why flat-mounted reeds sound different; when the vibrating reed travels above the frame a pulse of air travels down through the frame, with flat-mounted reeds this is already travelling towards the air hole under the pallet but with reed blocks it has to make a 90 degree turn (or get reflected, which amounts to the same thing).

It's also possible that inside a reed block the pulse gets reflected off the back of the chamber back towards the reed, which doesn't happen with flat-mounted reeds (at least, if the free end of the reed is over the pallet hole).
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed Block Acoustics
« Reply #68 on: April 09, 2012, 08:24:30 AM »

Theory is all very good and I can waffle on as well as any.  We need experiment, or we'll twitter about this forever. I guess a constant pressure of air input (to keep simple) and I haven't cracked the problem of switching it on and off. Fast Fourier Transform programs can be downloaded for free, but you'd need a decent microphone into your sound board.

Variables
  • Angle of the baffle
  • depth of the reed chamber
  • coupling or otherwise of the block to an external baffle
  • coupling  the block to a bit of lead to add mass?
  • anything else you might think of

I'd be particularly interested in whether screwing a thin wood baffle to the block changes anything, and whether there are any changes to the harmonics if the chamber geometry varies. I accept that it's a Helmholz resonator at main tone wavelengths, but that won't IMHO be true of the higher harmonics whose wavelengths are similar to chamber dimensions. And it's these that govern the dynamics of a reed's sound as not many of us play constant tones.

Anyone up for this? (the attached sketch is just an idea)  I lost my own workshop with the last house and am now in a little flat.  Perhaps someone's tuning rig might be adapted?
Logged
  _       _    _      _ 

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #69 on: April 09, 2012, 10:35:16 AM »

The reed chamber isn't even a Helmholtz resonator at most reed frequencies, it's much too small and the hole is too big -- again, see Tom's paper (or you can work it out from standard design equations for reflex loudspeakers).

Again as Tom said the chambers can have resonances (Helmholtz and cavity) at higher overtones of the high reeds, but the effects are unpredictable to say the least, and there's no way to get the chamber sizes to vary together with the reed frequencies because the range of sizes would be massive -- and if you don't do this the sound would be very inconsistent from reed to reed. I agree that nobody plays "constant tones" but a reed doesn't generate a sinewave, it has lots of high harmonics; but using resonances to affect these won't work consistently, just look at the dimensions involved.

(reed chamber length would have to vary over an 8:1 range to cover 3 octaves)

The dynamics of the sound -- reed starting and stopping -- are also little affected by chamber volume as such, the "response time" of the chamber (how long it takes air pressure to build up when the pallet opens) is much shorter than the time it takes the reed swing to build up, you can work this out from the size of the chamber and hole and the speed of sound.

The shape of the chamber and where the reed is placed compared to the pallet hole are much more important since these affect the air flow past the reed; if the chamber is "too small" it's the effect on air flow (constricting it) that matters, not the volume of the chamber as such -- this might sound like I'm being picky, but I'll bet that a small chamber with good airflow from reed to pallet hole will sound far better than a large chamber with poor airflow.

Resonances might be a good thing for violins and guitars, but they're undoubtedly a bad thing for free-reed instruments since they tend to absorb energy from the reed; extrapolating from stringed instruments to free reed is just plain wrong.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #70 on: April 09, 2012, 12:35:55 PM »

In the operation of reeds, there's a great distinction between the steady, or time averaged, or mean flow of air and the oscillatory (unsteady, or time dependent) vibrations produced in the air.  It seems to me you are visualizing and focusing only on the mean flow of the air.  It is the air vibrations that give rise to the sound we here, and thus, it's this motion that we need to focus on if we are to understand how different reed blocks influence sound.  This oscillatory motion is governed by concepts that are absent from a purely steady state treatment. 

Trying to understand the sound of a reed by focusing only on the mean, steady flow is like trying to understand the operation of Alternating Current circuits through application of only Direct Current concepts.  In the analogy, we understand clearly that capacitors and inductors, for instance, behave very differently to AC current than they do to DC current.  DC current cannot pass across a capacitor, whereas AC current can.  An ideal inductor behaves as a short circuit to a DC current, whereas it supplies an electrical inertial resistance to an AC current. 

Acoustics is an inherently unsteady (time dependent) phenomenon, and if you leave out this feature, you lose everything that explains how the reed is able to generate sound. 

This is all true, but considering unsteady flow, the chamber shape is still going to make a difference to that flow, no? I don't know much about unsteady flow (although I probably should, c.f. my exam in 3 weeks time), my fluids training has been in steady flow most of it. My question is whether the chamber shape makes a difference to the flow and whether that is significant in terms of sound.

This could be one reason why flat-mounted reeds sound different; when the vibrating reed travels above the frame a pulse of air travels down through the frame, with flat-mounted reeds this is already travelling towards the air hole under the pallet but with reed blocks it has to make a 90 degree turn (or get reflected, which amounts to the same thing).

It's also possible that inside a reed block the pulse gets reflected off the back of the chamber back towards the reed, which doesn't happen with flat-mounted reeds (at least, if the free end of the reed is over the pallet hole).

Aye, the first is what I think happens. But I really don't know enough about the science to know whether it makes a difference. Maybe I should start revising...

Theory is all very good and I can waffle on as well as any.  We need experiment, or we'll twitter about this forever. I guess a constant pressure of air input (to keep simple) and I haven't cracked the problem of switching it on and off. Fast Fourier Transform programs can be downloaded for free, but you'd need a decent microphone into your sound board.

http://forum.melodeon.net/index.php/topic,8904.msg110818.html#msg110818 :P

I would be interested in doing this, but I don't have anything at the moment. As I mentioned there, department does and in 3 years time if my friend is still studying Aeroacoustics after his PhD I might try to persuade him to investigate free reeds. I would try it myself, but I don't have the ability really to do anything in department.

The shape of the chamber and where the reed is placed compared to the pallet hole are much more important since these affect the air flow past the reed; if the chamber is "too small" it's the effect on air flow (constricting it) that matters, not the volume of the chamber as such -- this might sound like I'm being picky, but I'll bet that a small chamber with good airflow from reed to pallet hole will sound far better than a large chamber with poor airflow.

Quite.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed Block Acoustics
« Reply #71 on: April 09, 2012, 03:50:26 PM »

 This is all very interesting but still does not explain why an old grey Paolo sounds like it does, or a Pokerwork has that Hohner sound!  I wonder if the designers of the boxes that became so popular since the 1940's ever went that far in studying all of the acoustics phenomena. One can get obsessed with technology, others will simply enjoy playing their box and enjoying the sound! People get more impressed with your playing than the scientifiic precision of the reedblocks...  ::)
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #72 on: April 09, 2012, 04:18:23 PM »

This is all very interesting but still does not explain why an old grey Paolo sounds like it does, or a Pokerwork has that Hohner sound!  I wonder if the designers of the boxes that became so popular since the 1940's ever went that far in studying all of the acoustics phenomena. One can get obsessed with technology, others will simply enjoy playing their box and enjoying the sound! People get more impressed with your playing than the scientifiic precision of the reedblocks...  ::)

So should we just not bother trying to improve things, and assume that sprinkling some magical grey Paolo fairy dust on a melodeon immediately makes it sound better?

-- remember that everyone *knew* that the sound of a Stradivarius was unsurpassed, until blind tests showed that it wasn't ;-)

I listen to music on a perfectly average stereo system not a top-notch expensive hi-fi, because I'm interested in enjoying the music not the equipment.

But it seems to me that it should be possible to make a melodeon which would be better to play and sound better (which leads to a happier musician), because to be honest the design has essentially been stagnant for almost a century in design, construction methods and materials.

And since we're discussing what might accomplish this, the normal way to do that is to use some objective scientific analysis to try and determine what might improve the sound and what should have little or no effect -- trial and error using pure guesswork went out a long time ago when the scientific method was invented. I'm sure that it is perfectly possible to explain the sound of a grey Paolo or a Hohner, it's just acoustics and materials not rocket science.

-- yes I know, rocket science is easy, it's rocket engineering that's difficult...

Since the scientific method worked for the guy who set out with the supposedly impossible task of building a violin which sounded better than a Strad -- and succeeded according the the blind tests by experienced musicians and listeners -- this seems a good enough reason to apply it to the melodeon...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed Block Acoustics
« Reply #73 on: April 09, 2012, 04:52:34 PM »

But it seems to me that it should be possible to make a melodeon which would be better to play and sound better (which leads to a happier musician), because to be honest the design has essentially been stagnant for almost a century in design, construction methods and materials.
Perhaps things are fine as they are! The "sounding better" thing is a very subjective topic, as no two humans have the same hearing... What sounds "good" on an oscilloscope may not be perceived as such by humans.

Guitars have been built the same way for over a century. Fabrication methods have evolved, with new tools, glues, finishes, strings, etc but essentially the instrument has received no "improvements" for a long time: it's just fine like it is. Same with the piano, brass instruments, etc. Why do we need a "new" melodeon?

There has been experimental instruments since the early 20th century, with plastic guitars, metal violins, other instruments made of acrylic or plexiglas material, etc. Yet, people always came back to the good old design. Why is it that so many people are seeking so many old instruments, instead of buying new ones? It's because they "sound" and play better! According to them...


 
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Reed Block Acoustics
« Reply #74 on: April 09, 2012, 06:47:52 PM »


But it seems to me that it should be possible to make a melodeon which would be better to play and sound better (which leads to a happier musician), because to be honest the design has essentially been stagnant for almost a century in design, construction methods and materials.


Therein lies the problem, your play and sound better may well be my play and sound worse.  I dislike the Baffetti Binci's and most Castagnaris, either the sound does nothing for me or the action is too responsive so a "better" box that had these traits would leave me cold.  That being said I love what some people can do with their BBs and Castas, I just don't want to make that sound or play that instrument.

I don't see the fact that design has been stagnant (and I think I disagree with that statement) is a problem.  Recorder design has been similarly stagnant and it seems to work.  IMHO what we have is an instrument that can be made at a variety of different price points, yet all of which are similar enough that we can basically pick up any of them and play one, but have a wide variety of tonal quality and responsiveness to suit all tastes.  I'm not sure that what we're trying to do is expensively redesign something that ain't broke.

Steve
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #75 on: April 09, 2012, 10:33:20 PM »

There's a basic difference in philosophy here; I'm always looking for better ways to do things in the belief that they can be improved (it's my job as well, and the evidence suggests I'm usually right there), other people are happy to assume that things are fine just as they are and/or that something has already been raised to the peak of perfection by many years of artisanal endeavour.

So those who like things just as they are -- don't worry, be happy, I don't have a problem with that. But don't shoot people down who want to improve things, after all we'd still be all banging rocks together to make music if nobody had ever made any advances in instrument design :-)

Of course "improve" may be subjective, nobody likes all the same things and it would be a sad world if they did. I don't like sweet-sounding dry-tuned 3-voice boxes but other people do, that's fine by me. I also think something can be done to make the type of instrument I like (2-voice box for English and similar dance music) better, so I'm going to try and do that together with Andrew.

If I like the result then as far as I'm concerned we'll have succeeded. I don't expect everyone to like the result, because it'll probably be like very hoppy beer -- you either love it or hate it. But if it works I suspect quite a lot of people will love it...

(and if it doesn't work out, well that's the way the cookie crumbles -- if you don't try anything new you'll never find out what doesn't work)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Block Acoustics
« Reply #76 on: April 09, 2012, 10:50:17 PM »

I don't have much time, so I won't respond properly now, I'll leave that till later in the week. But suffice it to say that I agree wholly with Ian and those who think that designs have been constant should look again (especially into the Piano!) and should read my last blog post (http://ukebert.wordpress.com)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed Block Acoustics
« Reply #77 on: April 10, 2012, 02:40:34 AM »

One day the Buddha met an old man sitting by a river, and asked him what he has done with his life. The man replied: "I spent the last 50 years learning how to walk on the water, and I think I am just about to succeed". The Buddha replied: "Wouldn't it be easier just to use a boat?"
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed Block Acoustics
« Reply #78 on: April 10, 2012, 09:35:27 AM »

One day the Buddha met an old man sitting by a river, and asked him what he has done with his life. The man replied: "I spent the last 50 years learning how to walk on the water, and I think I am just about to succeed". The Buddha replied: "Wouldn't it be easier just to use a boat?"

If the boat was called the Titanic, perhaps some improvements would be a good thing...

P.S. Quebecois, if you're so against proposals for improvements, you don't have to read this thread and waste your valuable time replying to it ;-)
« Last Edit: April 10, 2012, 09:37:11 AM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Reed Block Acoustics
« Reply #79 on: April 10, 2012, 10:04:26 AM »

or that something has already been raised to the peak of perfection by many years of artisanal endeavour.

 ???????? the mind boggles !!!!!!!

george  >:E ;D
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".
Pages: 1 2 3 [4] 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal