Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Confession Time  (Read 6232 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Confession Time
« on: February 22, 2012, 11:22:28 AM »

I took a Dremel grinder to some reeds today  :o

I am making a 4th button start C/F Pokerwork in the equivalent layout of my Penguin of Death Pokerwork (it has the G scale layout) so needed the lowest reed on the F row to be A/Bb rather than A/C. So I Dremeled the C reeds down a tone and a half  :|bl , be interesting to see how long they last. They do seem to be surprisingly stable.
« Last Edit: February 22, 2012, 01:24:30 PM by Lester »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Confession Time
« Reply #1 on: February 22, 2012, 12:18:45 PM »

Um... C to B flat is only a tone, not a tone and a half.

Hope it goes well, anyway - should be a nice sounding box.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Confession Time
« Reply #2 on: February 22, 2012, 12:33:59 PM »

You should be scratched out of the Guild of Reed Fettlers this instance.
Logged
aka malodeon

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Confession Time
« Reply #3 on: February 22, 2012, 03:54:25 PM »

On larger reeds (not the small, high-pitched ones) instead of grinding the reed's base,  I apply a tiny drop of molten soldering on the tip, then file out to tune! Totally reversible process.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Confession Time
« Reply #4 on: February 22, 2012, 03:56:43 PM »

On larger reeds (not the small, high-pitched ones) instead of grinding the reed's base,  I apply a tiny drop of molten soldering on the tip, then file out to tune! Totally reversible process.

Me too.   The low reeds can be quite thin already so filing to lower the pitch can result in less stable pitch - the reed has a greater tendency to flatten if played hard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Confession Time
« Reply #5 on: February 22, 2012, 04:00:43 PM »

Yes, I think solder is better to lower pitch but I have used a dremel conical grindstone a lot to raise the pitch of larger reeds.  Very precise and efficient IMO.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Confession Time
« Reply #6 on: February 22, 2012, 04:07:10 PM »

Much prefer a nice sharp swiss file.  No noise, no wires, no abrasive dust, no need to switch it on, and it leaves a nice smooth finish...
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Confession Time
« Reply #7 on: February 22, 2012, 04:10:29 PM »

In a french accent a la Pariselle "Good luck!"

Seriously, Lester, let us know how it stands the rigours of your manly style.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Confession Time
« Reply #8 on: February 22, 2012, 06:14:16 PM »

I once made a similarly large adjustment to a concertina reed and it gave it a thinner tone and went out of tune fairly quickly.  Not a fair comparison as it was a brass reed...

Talking of tuning, I was wondering why all the tuning scratches I've seen go right across the reed?  Surely this acts as a stress raiser for the reed to crack?  For raising the pitch, would a dimple in the centre of the reed work as well?  It would, after all change the centre of gravity just the same.  I can see the reson why a scratch near the root of the reed for lowering the pitch would be more effective if it went right across though.  Do different tuners use different techniques?

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Confession Time
« Reply #9 on: February 22, 2012, 06:20:05 PM »

I once made a similarly large adjustment to a concertina reed and it gave it a thinner tone and went out of tune fairly quickly.  Not a fair comparison as it was a brass reed...

Talking of tuning, I was wondering why all the tuning scratches I've seen go right across the reed?  Surely this acts as a stress raiser for the reed to crack?  For raising the pitch, would a dimple in the centre of the reed work as well?  It would, after all change the centre of gravity just the same.  I can see the reson why a scratch near the root of the reed for lowering the pitch would be more effective if it went right across though.  Do different tuners use different techniques?

Rob.

Don't think I have ever seen a scratch across a reed, plenty of grind marks but all scratches have been along the reed. I would say hat if you scratch across a reed you more than likely nick the plate and cause all sorts f pain.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Confession Time
« Reply #10 on: February 22, 2012, 06:51:44 PM »

For raising the pitch, would a dimple in the centre of the reed work as well?  It would, after all change the centre of gravity just the same. 
Rob.

This is exactly what I do with the Dremel tool to raise pitch substantially.  This is the advantage of using the Dremel instead of filing across the entire tip.  Both methods work but the dimple has the advantage of not affecting the profile or thickness of the reed tip.  It is also very easy to reverse and fill in with solder.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Confession Time
« Reply #11 on: February 22, 2012, 08:13:29 PM »

I took a Dremel grinder to some reeds today  :o

Dremel tool can be very useful for all sorts of chores. I have found it handy to devise a speed control for the tool. Perhaps these are standard on new Dremels, but mine is rather ancient. I have merely connected mine in series with a standard 600 watt incandescent lighting dimmer, which allows almost infinite speed control, which in turn offers the operator less risk of major instant damage. I don't care for using it on reeds, though, I prefer the file. 
 The dimmer/control setup also works well for the electric soldering iron I use for waxing. I can regulate it to a fine degree so that the wax is hot but not scorching.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Confession Time
« Reply #12 on: February 22, 2012, 08:18:11 PM »

I took a Dremel grinder to some reeds today  :o

Dremel tool can be very useful for all sorts of chores. I have found it handy to devise a speed control for the tool. Perhaps these are standard on new Dremels, but mine is rather ancient. I have merely connected mine in series with a standard 600 watt incandescent lighting dimmer, which allows almost infinite speed control, which in turn offers the operator less risk of major instant damage. I don't care for using it on reeds, though, I prefer the file. 
 The dimmer/control setup also works well for the electric soldering iron I use for waxing. I can regulate it to a fine degree so that the wax is hot but not scorching.

Mine is the battery type with infinite speed control, well at least it did until it got over worked at the Melodeon Building Course last year, now it just has about four speeds which you have to search out with the controller  :(

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Confession Time
« Reply #13 on: February 22, 2012, 09:50:42 PM »

I took a Dremel grinder to some reeds today  :o

Dremel tool can be very useful for all sorts of chores. I have found it handy to devise a speed control for the tool. Perhaps these are standard on new Dremels, but mine is rather ancient. I have merely connected mine in series with a standard 600 watt incandescent lighting dimmer, which allows almost infinite speed control, which in turn offers the operator less risk of major instant damage. I don't care for using it on reeds, though, I prefer the file. 
 The dimmer/control setup also works well for the electric soldering iron I use for waxing. I can regulate it to a fine degree so that the wax is hot but not scorching.

Mine is the battery type with infinite speed control, well at least it did until it got over worked at the Melodeon Building Course last year, now it just has about four speeds which you have to search out with the controller  :(

Does infinite speed control mean it can go infinitely fast?

If so does this mean you can finish the grinding before you've started?

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Confession Time
« Reply #14 on: February 22, 2012, 09:55:22 PM »

Does infinite speed control mean it can go infinitely fast?

If so does this mean you can finish the grinding before you've started?

Ian

Yes to both questions  :o

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Confession Time
« Reply #15 on: February 23, 2012, 04:57:24 PM »

I have seen many reeds with scratches on them, and even pictures and videos of "technicians" scratching the reeds to "tune" them.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Confession Time
« Reply #16 on: February 23, 2012, 05:00:49 PM »

I have seen many reeds with scratches on them, and even pictures and videos of "technicians" scratching the reeds to "tune" them.

Don't think anyone was debating whether reeds are tuned by scratching, it s my normal method of attack, just the axis of the scratching.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Confession Time
« Reply #17 on: March 09, 2012, 01:08:56 PM »

I've used white enamel paint before to lower a reed pitch -  the stuff you can get to patch up scratches on enamelled kitchen appliances. Just put a drop onto the reed tip. It's much easier than solder to finely tune, just scratch some paint off with a scraper!  Plus I've never known it fall off a reed.


Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Confession Time
« Reply #18 on: March 09, 2012, 02:35:34 PM »

I started off with a Dremel. Tried some cheap hardware store needle files and always went back to the dremel. Then invested in some good Swiss files, and my dremel has collected dust ever since. For me the files can be faster than a dremel, can be a lot slower, a lot better control, and not sure if makes much difference or not, but I like to keep the tongue filed evenly and smoothly. Can't do that with a dremel.

Going up a half step, even a full step doesn't bother me, but going down a half step by filing all the reeds would make me uneasy.  Lester, how has the tuning turned out?

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Confession Time
« Reply #19 on: March 09, 2012, 02:48:43 PM »

Lester, how has the tuning turned out?

They sound alright but I have not finished the box so have not applied the "rigours of your manly style" (c) Rees to them yet. Too much customer work and domestic stuff getting in the way.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal