Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Reed suppliers  (Read 21453 times)

0 Members and 1 Guest are viewing this topic.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Reed suppliers
« on: February 24, 2012, 09:01:39 PM »

Does anyone know of suppliers for decent melodeon reeds? I have been trying to get hold of www.frment.com for 6 weeks but I have no replies, and they have no prices on their website which is of no use at all.
Looking for Binci or Salpa or anything that is as good. Please can you point me in the write direction of suppliers or manufacturers.
I am wanting to buy in reasonable bulk.

Many thanks

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed suppliers
« Reply #1 on: February 24, 2012, 11:27:08 PM »

If buying several sets you should by them from the makers, Binci, Voci Armoniche(VA), or Cagnoni.  Salpa and Antonelli don't now exist as separate companies since they merged several years ago to form VA. all have web sites that will give contact details.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #2 on: February 24, 2012, 11:33:23 PM »

If buying several sets you should by them from the makers, Binci, Voci Armoniche(VA), or Cagnoni.  Salpa and Antonelli don't now exist as separate companies since they merged several years ago to form VA. all have web sites that will give contact details.

Awesome thanks, already started to get onto that. Didnt realise VA was Salpa etc.

Are Cagnoni reeds any good? Which is better out of tam, macchina, tipo a mano, a mano etc etc
I want professional sounding reeds so the melodeon will have the same quality sound as a Castagnari rather than a Soprani or Hohner

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed suppliers
« Reply #3 on: February 25, 2012, 01:03:07 AM »

I want professional sounding reeds so the melodeon will have the same quality sound as a Castagnari rather than a Soprani or Hohner
Castagnari generally use Voci Armoniche TAM reeds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #4 on: February 25, 2012, 01:14:26 AM »

Castagnari generally use Voci Armoniche TAM reeds.

Oooo many thanks for that!! I thought they might make their own, being the large melodeon manufacturer that they are. But this is great news as Castagnari is the sound I am after

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed suppliers
« Reply #5 on: February 25, 2012, 01:27:13 AM »

Castagnari generally use Voci Armoniche TAM reeds.

Oooo many thanks for that!! I thought they might make their own, being the large melodeon manufacturer that they are. But this is great news as Castagnari is the sound I am after
I should have qualified my statement a bit. In their cheaper (!) models they use super dural reeds, which are still very good - just not quite as responsive as the TAM reeds. The Castagnari catalogue tells you which reeds are in which instruments...
http://www.castagnari.com/index.php?strparam=&language=uk&sz=300

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed suppliers
« Reply #6 on: February 25, 2012, 01:27:40 AM »

Of course cost might be an issue. There are threads on this forum about the difference between the different types of reeds, with the consensus being that tam reeds are often as good if not better than a mano reeds and that a good setup makes a huge difference.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Reed suppliers
« Reply #7 on: February 25, 2012, 09:04:25 AM »

Also don't forget Artigiana Voci     http://www.artigianavoci.com/   Who supply the loverly handmade reeds for Beltuna, a superb reed. All the Best mory
Logged

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Reed suppliers
« Reply #8 on: February 25, 2012, 09:14:11 AM »

Of course cost might be an issue. There are threads on this forum about the difference between the different types of reeds, with the consensus being that tam reeds are often as good if not better than a mano reeds and that a good setup makes a huge difference.

Could you please advise as to whether or not the term "set up" here has a specific meaning or is in general terms? Thank you.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed suppliers
« Reply #9 on: February 25, 2012, 09:23:38 AM »

Could you please advise as to whether or not the term "set up" here has a specific meaning or is in general terms? Thank you.

I believe it to mean that the reeds are in tune, and have had their 'voicing' set so that they start well on both low and high bellows pressures.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #10 on: February 25, 2012, 09:38:57 AM »

Of course cost might be an issue.
Cost goes without saying really. If you want quality in anything you need to be prepared to pay for it. Which I am, up to a limit.
____________________________________________________________________________________________________

What I am doing is trying to find quality reeds for a suitable price. So I am just trying to find out who makes good reeds, who supplies them if not the manufacturer, and what the price is and if there is a discount on bulk purchases.
I have emailed Voci Armoniche and wait a response. Hopefully they will actually reply unlike frment.com (who I enquired about the cost of a large order, but they obviously don't want the business).

Also don't forget Artigiana Voci     http://www.artigianavoci.com/   Who supply the loverly handmade reeds for Beltuna, a superb reed. All the Best mory
Cool, thanks. I had not heard of them (mainly because I generally don't pay attention about what is available unless I need things otherwise my wallet gets twitchy). Will send them an email too.
« Last Edit: February 25, 2012, 09:41:55 AM by mattsmee »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed suppliers
« Reply #11 on: February 25, 2012, 10:09:05 AM »

What I am doing is trying to find quality reeds for a suitable price.

Its pretty much true that the better quality reeds will cost more and the lower quality will cost less.

Fitting the best quality reeds is no guarantee of the best quality sound.   The design and construction of the whole box also have a big influence in the sound.  For example I've fitted lots of sets of Italian reeds to old Hohner Clubs and the sound you end up with is a sort of cross between Hohner and Italian.  The sound also depends to a large degree on the way the reeds are tuned, and the responsiveness depends on the care with which they are set up, as Lester has indicated.  You can learn how to do all these things, but it takes a certain amount of time to really understand what you are about.  The only way is to give it a try!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed suppliers
« Reply #12 on: February 25, 2012, 10:12:58 AM »

You can learn how to do all these things, but it takes a certain amount of time to really understand what you are about. 

Tell me about it  ;)

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #13 on: February 25, 2012, 10:23:27 AM »

What I am doing is trying to find quality reeds for a suitable price.

Its pretty much true that the better quality reeds will cost more and the lower quality will cost less.

Fitting the best quality reeds is no guarantee of the best quality sound.   The design and construction of the whole box also have a big influence in the sound.  For example I've fitted lots of sets of Italian reeds to old Hohner Clubs and the sound you end up with is a sort of cross between Hohner and Italian.  The sound also depends to a large degree on the way the reeds are tuned, and the responsiveness depends on the care with which they are set up, as Lester has indicated.  You can learn how to do all these things, but it takes a certain amount of time to really understand what you are about.  The only way is to give it a try!

Good point. I am actually testing on an old pokerwork. Pulling it apart and stuff to test/learn, though I have no experience of tuning so will either see if they will arrive tuned or if I can get someone to do it for me. With the science of sound, acoustics and melodeon construction I am pretty confident. I have a BSc in music and technology, so feel (though not an expert) I have enough knowledge to not make a complete mess of things.

I have a lot to learn but have a head start with my education. I am learning a lot from forums on here and elsewhere on the net. Also from trial and error with this pokerwork which is currently at the workshop in a state suitable for selling small parts of a melodeon, haha.

Also I have engineers helping my build it and the construction of the box has already been changed because they felt a different method than what was planned would be much better for a melodeon, which is going to be battered about.
However, I won't be making a purchase of reeds until I am confident enough that they won't be wasted on my own ignorance.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed suppliers
« Reply #14 on: February 25, 2012, 10:28:25 AM »

<snip>though I have no experience of tuning so will either see if they will arrive tuned
</snip>

The reeds will not arrive tuned, even if they did when you mount them on the block they will need re-tuning, and the chances are that when the block goes in the box it will require more fine-tuning.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #15 on: February 25, 2012, 10:30:42 AM »

<snip>though I have no experience of tuning so will either see if they will arrive tuned
</snip>

The reeds will not arrive tuned, even if they did when you mount them on the block they will need re-tuning, and the chances are that when the block goes in the box it will require more fine-tuning.

Ah yes. Thanks, stupidly hadn't twigged. I will learn then, good job the pokerwork needs tuning :P

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed suppliers
« Reply #16 on: February 25, 2012, 10:41:11 AM »

What sets Cagnoni apart is the fact that they seem to use German ("Eberle") steel exclusively (also in their most expensive reeds), rather than the Swedish ("Uddeholm") steel. Opinions are, as can be expected, divided. German steel is by some reed makers reputed to be harder, break more easily and to be inferior to the Swedish product.
It's not always so easy to distinguish fact from prejudice, and to a certain degree it may be a matter of weighing pros and cons against each other...
I'll be testing a set of top Cagnoni reeds later this year, I'm especially curious about the performance of their larger bass reeds, where harder steel may be an advantage.
As to the discussion TAM ("type as if hand made")  versus AM (true hand made): In my opinion it's perfectly possible to make a lousy box with A Mano reeds, while it is near impossible to make a top notch instrument with reeds of a lower category incl. TAM
Logged

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #17 on: February 25, 2012, 10:44:45 AM »

though I have no experience of tuning so will either see if they will arrive tuned
This is the reason I was trying to get in contact with frment.com as they sell their reeds already tuned. Very frustrating that they don't reply.
_______
If all doesn't go to plan and I can't do all this (which is likely). I will just sell my idea to someone.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed suppliers
« Reply #18 on: February 25, 2012, 11:09:38 AM »

I'm sure frment.com will not supply reeds ready tuned.  Anyone who says they can does not know what they are talking about. 

Back to reed choice.  With reeds there is not just one way of measuring between say ok, good, and very good,  there are differences in response to low pressure playing, maximum loudness available, how much air they use, and the whole rather indefinable but vitally important subject of sound quality.  Also some reeds are more prone to break than others. 

What sets Cagnoni apart is the fact that they seem to use German ("Eberle") steel exclusively (also in their most expensive reeds), rather than the Swedish ("Uddeholm") steel. Opinions are, as can be expected, divided. German steel is by some reed makers reputed to be harder, break more easily and to be inferior to the Swedish product.
It's not always so easy to distinguish fact from prejudice, and to a certain degree it may be a matter of weighing pros and cons against each other...
I'll be testing a set of top Cagnoni reeds later this year, I'm especially curious about the performance of their larger bass reeds, where harder steel may be an advantage.

I've mainly used Cagnoni in my Hohner conversions.  My regular playing box which gets used a lot and pushed hard has never broken a reed in about 8 years of playing.   Saltarelle also use Cagnoni reeds extensively, as do some of the better quality piano accordion makers such as Pigini.   I rarely see broken reeds in any of these makes, but I do see loads of Hohners with broken reeds.  So my experience would suggest that as far as reed breakage is concerned any difference between Swedish and German steel is negligible compared with the difference between Hohner reeds and Italian reeds.   

Perhaps German steel has gained its 'snappy' reputation by association with Hohner reeds?   
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #19 on: February 25, 2012, 11:18:20 AM »

I'm sure frment.com will not supply reeds ready tuned.  Anyone who says they can does not know what they are talking about. 

Back to reed choice.  With reeds there is not just one way of measuring between say ok, good, and very good,  there are differences in response to low pressure playing, maximum loudness available, how much air they use, and the whole rather indefinable but vitally important subject of sound quality.  Also some reeds are more prone to break than others. 


Well, according to frment.com's catalogue they are selling reeds in certain keys. As does cgmmusical.co.uk. Obviously they will need to be adjusted to the melodeon but obviously people give you a fighting chance.
_______

What sets Cagnoni apart is the fact that they seem to use German ("Eberle") steel exclusively (also in their most expensive reeds), rather than the Swedish ("Uddeholm") steel. Opinions are, as can be expected, divided. German steel is by some reed makers reputed to be harder, break more easily and to be inferior to the Swedish product.
It's not always so easy to distinguish fact from prejudice, and to a certain degree it may be a matter of weighing pros and cons against each other...
I'll be testing a set of top Cagnoni reeds later this year, I'm especially curious about the performance of their larger bass reeds, where harder steel may be an advantage.

I've mainly used Cagnoni in my Hohner conversions.  My regular playing box which gets used a lot and pushed hard has never broken a reed in about 8 years of playing.   Saltarelle also use Cagnoni reeds extensively, as do some of the better quality piano accordion makers such as Pigini.   I rarely see broken reeds in any of these makes, but I do see loads of Hohners with broken reeds.  So my experience would suggest that as far as reed breakage is concerned any difference between Swedish and German steel is negligible compared with the difference between Hohner reeds and Italian reeds.   

Perhaps German steel has gained its 'snappy' reputation by association with Hohner reeds?   
[/quote]
My Saltarelle is very weak up the top end but have been using it for years and given it a lot of roughness with playing loudly and havent broken a reed yet.

I agree, German steel probably got its reputation from Hohner and also from prejudice.
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal