Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Irons - my latest acquisition  (Read 17830 times)

0 Members and 1 Guest are viewing this topic.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Irons - my latest acquisition
« on: February 26, 2012, 02:52:44 PM »

We had some discussion a while back about the Hobbycraft encaustic wax tool's suitability for reed waxing - so I got one.

I was being dragged round an Lidl store today, and noticed an electric "wood burning iron" i.e. pyrography tool, at £8.99 (rather less than the Hobbycraft tool, as I recall). The Lidl iron comes with 7 detachable bits for drawing, which look as if they will do for waxing. As these curiosities in Lidl seldom appear twice, I bought one, on the spur of the moment.
It also has 7 small branding irons with tasteful designs upon each; so if it doesn't work as a waxing iron, I can always amuse myself by turning my horrible plain old French and Italian boxes into "pokerworks".

I expect to be doing some reed repairs soon, so I'll report on how it worked.
« Last Edit: February 26, 2012, 05:22:50 PM by Prestidigitator »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Irons - my latest acquisition
« Reply #1 on: February 26, 2012, 03:27:50 PM »

I have a feeling the pyrography irons may be too hot for reed wax.

I use a soldering iron with a variable temperature control and digital display. I notice that the reed wax melts cleanly without smoking on a setting of 180 to 190°C, which I suspect is quite a bit cooler than the temperature required to char wood.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #2 on: February 26, 2012, 04:13:03 PM »

Waxing reeds with soldering irons or similar tools is problematic and should be avoided, especially when waxing whole reed blocks.
By using either a German or an Italian type waxing spoon that can be dipped into a melting pot you will get a more professional result in much less time. It will allow you to hold the reed block with one hand. By exploiting the forces of gravity and with some experience the molten wax will float freely wherever you want it to go (and can be more easily prevented from floating where it is not supposed to go).
« Last Edit: February 26, 2012, 05:12:26 PM by diatonix »
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Irons - my latest acquisition
« Reply #3 on: February 26, 2012, 05:52:40 PM »

I have a feeling the pyrography irons may be too hot for reed wax.

I use a soldering iron with a variable temperature control and digital display. I notice that the reed wax melts cleanly without smoking on a setting of 180 to 190°C, which I suspect is quite a bit cooler than the temperature required to char wood.

Steve-I had planned to use the dimmer switch which I use with my ordinary soldering iron, and the Hobbycraft tool, to get it to the right temperature.  As you point out, charring wood means plenty of heat, and this gadget says "Max Working Temperature 550°C", so it will certainly need cranking down. I don't plan to do pokerwork on the reed blocks. I'm also looking at getting a variable iron "station", I guess
like yours, as it seems that the prices for fairly basic systems from people like Maplins are now far more reasonable.

Diatonix - I do indeed have several waxing spoons in different sizes which I made myself. Although I like them, for all the reasons you give, I use them rarely, as I don't generally have that much waxing to do at one go and find that cranking up the double-boiler, melting enough wax to "work" the spoon properly and so forth is a bit much for small repairs. At the moment, as part of a learning curve, I'm reinstating some Preciosa reeds (for practice, mainly), and I'm casting around for methods and tools that I'm comfortable with, and which do the job properly. These will include a "small spoon" trial.

At least I know that whatever mess I make (within reason), there is some salvation from the professionals - to whom I should probably have entrusted the work in the first place, as I generally do. Still, "Nothing Ventured, Nothing Gained".
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #4 on: February 26, 2012, 10:54:58 PM »

Waxing reeds with soldering irons or similar tools is problematic and should be avoided, especially when waxing whole reed blocks.

That is rather a sweeping statement.

I must have waxed 100s of whole reed blocks with a temperature controlled soldering iron and I find it a quick and convenient method.  I've done a set of two treble blocks this evening from a Hohner Double Ray. The waxing process took just over 15 minutes for the 42 reed plates.  I'll post a photo tomorrow to demonstrate the neatness of the job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Irons - my latest acquisition
« Reply #5 on: February 27, 2012, 12:00:37 AM »

I think that the method used to wax in reeds is something of a personal preference. There are doubtless lots of ways of doing it and I've seen exceptional results from many. I can vouch that Theo's waxing is extremely neat.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #6 on: February 27, 2012, 12:11:48 AM »

Thanks for that!  I suspect I would make a pretty good mess with the traditional waxing spatula until I had plenty of practice.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Irons - my latest acquisition
« Reply #7 on: February 27, 2012, 01:06:27 AM »

I can vouch that Theo's waxing is extremely neat.
Hear, hear!  (:) :|glug
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #8 on: February 27, 2012, 08:03:28 AM »

Exhibit A m'Lud, and I have done no tidying up of the wax after it cooled.   Valves were fixed before waxing.
« Last Edit: February 27, 2012, 08:06:08 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Irons - my latest acquisition
« Reply #9 on: February 27, 2012, 03:13:54 PM »

I use a stylus for hot wax art, it is obviously calibrated to melt wax! I did two complete reed replacement jobs (4-voice and 2-voice 1-row boxes) and various other repairs, and it worked like a charm. Cost me only CAD $27 in a craft store. The tip is slotted, which makes it really easy to use with wax sticks; it works a bit like an old ink pen, wax flows through the slot and then exits through the tip exactly where you want it.
« Last Edit: February 27, 2012, 03:32:38 PM by Québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Irons - my latest acquisition
« Reply #10 on: February 28, 2012, 06:51:36 AM »

I find that my dimmer switch will control the temperature of my new "wood burning iron" from stone-cold to red-hot, so some practical testing will shortly begin.

I use a stylus for hot wax art, it is obviously calibrated to melt wax! I did two complete reed replacement jobs (4-voice and 2-voice 1-row boxes) and various other repairs, and it worked like a charm. Cost me only CAD $27 in a craft store. The tip is slotted, which makes it really easy to use with wax sticks; it works a bit like an old ink pen, wax flows through the slot and then exits through the tip exactly where you want it.

That's given me an idea about a better way to use my encaustic wax pen/stylus; for which, thanks.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Irons - my latest acquisition
« Reply #11 on: February 29, 2012, 08:09:54 PM »

I use a stylus for hot wax art, it is obviously calibrated to melt wax! I did two complete reed replacement jobs (4-voice and 2-voice 1-row boxes) and various other repairs, and it worked like a charm. Cost me only CAD $27 in a craft store. The tip is slotted, which makes it really easy to use with wax sticks; it works a bit like an old ink pen, wax flows through the slot and then exits through the tip exactly where you want it.

Wow, I'd like to find out more about this. In a former lifetime, I was a draftsman and actually drew lines with the old style 'ruling pens' on linen media. I like the idea (in theory anyway) of distributing wax this way, if the tool is not too bulky!

Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Irons - my latest acquisition
« Reply #12 on: March 01, 2012, 12:49:54 AM »

I wrote a long post about the merits of using an encaustic stylus but now can't find it :( But there are posts available if you are interested.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Irons - my latest acquisition
« Reply #13 on: March 01, 2012, 07:59:45 AM »

I wrote a long post about the merits of using an encaustic stylus but now can't find it :( But there are posts available if you are interested.

Would this be it?

http://forum.melodeon.net/index.php/topic,6971.0.html
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Irons - my latest acquisition
« Reply #14 on: March 01, 2012, 12:26:20 PM »

I use a stylus for hot wax art, it is obviously calibrated to melt wax! I did two complete reed replacement jobs (4-voice and 2-voice 1-row boxes) and various other repairs, and it worked like a charm. Cost me only CAD $27 in a craft store. The tip is slotted, which makes it really easy to use with wax sticks; it works a bit like an old ink pen, wax flows through the slot and then exits through the tip exactly where you want it.

Wow, I'd like to find out more about this. In a former lifetime, I was a draftsman and actually drew lines with the old style 'ruling pens' on linen media. I like the idea (in theory anyway) of distributing wax this way, if the tool is not too bulky!
Kandi Hot Wax Stylus
http://www.i-kandi.com/HotWaxArt-Encaustic-Stylus.asp
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #15 on: March 02, 2012, 09:57:43 PM »

Exhibit A m'Lud, and I have done no tidying up of the wax after it cooled.   Valves were fixed before waxing.

Theo, do you have any photos of your tools and/or process of waxing that you can share with us? I'd really like a cleaner process than I'm using right now.

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #16 on: March 04, 2012, 11:02:11 AM »

Exhibit A m'Lud, and I have done no tidying up of the wax after it cooled.   Valves were fixed before waxing.

Theo, do you have any photos of your tools and/or process of waxing that you can share with us? I'd really like a cleaner process than I'm using right now.

Thanks

I don't have any photos,  its something I need to do.  I've not done it so far because the processes mostly need two hands so I need someone to operate the camera.   The things you need to see are are quite small, and with two hands, my head, and a fume extractor all close together its not a simple matter to photograph.   So it is something I would like to do, but it may not get done very soon.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #17 on: March 05, 2012, 04:09:57 AM »

I read up on using a soldering iron for waxing reeds today. I wrapped some 12 gage copper electric wire around my soldering iron, flattened the end to a spatula shape and put a curve in the spatula. It works quite well though it's slow in the execution. It took quite a while to get used to the process but I did end up with a much cleaner wax job than I ever have before. I don't know how I'd do the Preciosa reeds since there's no space between one reed and the next, but that's for another day.

Theo, a photo of your "waxing iron" would help me a great deal at this point. Forget about trying to do a video. Having done a full melodeon today, I realize how difficult it would be to do a video. A photo or two of the tool(s) would be great though.

Thanks.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #18 on: March 05, 2012, 08:18:19 AM »

The tool is just an unmodified small temperature controlled soldering iron. I rest a stick of wax against the side and it melts and runs off the tip. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Irons - my latest acquisition
« Reply #19 on: March 05, 2012, 04:58:13 PM »

  Regulating the heat seems quite as important as well...you need the iron hot enough to liquefy the wax so it flows well and gets good adhesion to the surfaces, but not so hot as to scorch the wax, and vaporize the more volatile components, which are there mainly to preserve the tenacity and pliability of the wax. Sounds like Steve has found a good type of iron for precise control.
   I think this reason alone is enough to justify the the wax stick and iron method; otherwise, you are cooking a small pot of wax over a flame, evaporating your constituents, dipping in with a spoon, and although the results of the waxing job may be first rate, your remaining wax in the pot has been compromised to some degree. I'll also admit I was a bust with the old-style waxing spoon! :|bl
Logged
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal