Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: Irons - my latest acquisition  (Read 17874 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Irons - my latest acquisition
« Reply #20 on: March 05, 2012, 05:37:54 PM »

Sounds like Steve has found a good type of iron for precise control.
This is what I use. It's a Precision Gold soldering iron and station, from Maplin.
There is a photo of it on Amazon here, although I note that Amazon have marked it as currently out of stock. Should be available from Maplin direct though.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #21 on: March 05, 2012, 05:49:53 PM »

This is what I use....

Thanks Steve. Do you use the standard soldering tip or something different - a blade tip of some kind?

I started waxing with Charlie Marshall's brushing technique but found the wax cooled too quickly resulting in the brush getting stuck to the reed frequently. Plus the drips that seemed to happen in the wrong places necessitating later cleanup.

I've tried the spoon method and have found it difficult to get a clean distribution of the wax. Too many possibilities for dripping the wax where you don't want it. I've seen video demonstrations of a professional working with a spoon but it hasn't worked out well for me. I'm now sold on the soldering iron.  :D I just need to work out the particulars. It does take longer to apply wax this way, but then I'd probably spend that amount of time cleaning up after using the spoon so the time spent waxing with the soldering iron is probably a wash.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Irons - my latest acquisition
« Reply #22 on: March 05, 2012, 05:52:49 PM »

Sounds like Steve has found a good type of iron for precise control.
This is what I use. It's a Precision Gold soldering iron and station, from Maplin.
There is a photo of it on Amazon here, although I note that Amazon have marked it as currently out of stock. Should be available from Maplin direct though.

http://www.maplin.co.uk/48w-lcd-display-solder-station-219133

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Irons - my latest acquisition
« Reply #23 on: March 05, 2012, 05:55:56 PM »

I use on of these. http://www.maplin.co.uk/25w-soldering-iron-type-xs-4063 powered via a dimmer switch. I have filed the tip to enable it to fit between reeds.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #24 on: March 05, 2012, 06:15:08 PM »

Never heat wax over a flame please. Melted wax is inflammable.  The safest way to do this is in an electric wax bath with thermostat, the type used for batik should be suitable.  Second best if you must use a flame please please use a water bath, at least that way there is a limit to how hot the wax can get.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #25 on: March 05, 2012, 06:19:51 PM »

I noticed as I was using my new waxing system (flattened piece of 12 guage copper wire) that there's a great deal of heat loss at the tip of the blade. I adjusted the distance of the end of the "spatula" from the tip of the soldering iron such that I could get a good flow down the blade while the blade was in contact with the wax or the reed plate. The level of heat that allowed the blade to keep the wax hot at the application site cause the wax left on the blade to smoke when not in contact with the work. I simply wiped the blade off with a paper towel before putting the tool down to place the next reed.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #26 on: March 05, 2012, 06:31:10 PM »

Here are three photos of my waxing/soldering iron.   It is a Weller 20W thermostatic soldering iron.
The pictures are all posed so I have a free hand for the camera.   In the third photo I've placed the wax stick where it would be in use next to the heating element, but the iron would not be lying flat in use, it would be in the sort of position shown in the second photo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Irons - my latest acquisition
« Reply #27 on: March 05, 2012, 06:56:51 PM »

Never heat wax over a flame please. Melted wax is inflammable.  The safest way to do this is in an electric wax bath with thermostat, the type used for batik should be suitable.  Second best if you must use a flame please please use a water bath, at least that way there is a limit to how hot the wax can get.

Yes indeed. The vapors of the hot wax can cause a flash fire very easily if exposed to spark or flame. I mentioned 'flame' in my post, because I was instructed by an old school repairman to use an alcohol flame to heat the wax tub, and the waxing spoon. He also advised disposing of the residual wax, as it had lost it's 'fresh' qualities.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #28 on: March 05, 2012, 07:07:21 PM »

Here are three photos of my waxing/soldering iron.

Thank you Theo! Almost as good as a video.

I'll get another soldering iron to use as a dedicated waxing tool and add a dimmer switch to allow fine adjustment of the heat.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #29 on: March 05, 2012, 07:19:46 PM »

A dimmer switch is not as good as a thermostatic control.  It still gives a constant heat input which means the temp will rise when not in use and will drop once you start melting cold wax.   Thermostatic controlled irons are not desperately expensive and take one more but of guesswork out of the process.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #30 on: March 05, 2012, 07:55:49 PM »

A dimmer switch is not as good as a thermostatic control.  It still gives a constant heat input which means the temp will rise when not in use and will drop once you start melting cold wax.   Thermostatic controlled irons are not desperately expensive and take one more but of guesswork out of the process.

I hadn't realized that. Thanks again. I'll get a thermostatic controlled iron then.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Irons - my latest acquisition
« Reply #31 on: March 05, 2012, 08:12:37 PM »

Using the right tool for the right job!

Seems to me that irons allow precision work, using only the wax you need, whether it's for a single reed plate or an entire reedblock.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Irons - my latest acquisition
« Reply #32 on: March 05, 2012, 08:16:19 PM »

I think if I was waxing many reed blocks a day I would learn the Italian method with spatula and wax bath.  It is probably easier to be quick and neat with this method. I rarely wax more than one set of blocks in a day and the soldering iron is ready to use within 30 seconds of switching on,  I'm sure a wax bath would take longer to heat up.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #33 on: March 05, 2012, 10:34:54 PM »

My wax heater, actually a product designed for cosmeticians and equipped with thermostatic control, also allows me to melt very small quantities of wax at a time. I prefer this method even for "small" jobs such as waxing accidentals etc. It doesn't take many minutes to reach the desired temperature.
I find the Italian spatula rather treacherous and prefer the German type spoon. One "load" contains enough wax for maybe 4 to 5 reeds or a complete outer edge along all the (usually 10 or 11) reeds. Waxing 1 block becomes a matter of a few minutes.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #34 on: March 05, 2012, 10:53:38 PM »

I find the Italian spatula rather treacherous and prefer the German type spoon. One "load" contains enough wax for maybe 4 to 5 reeds or a complete outer edge along all the (usually 10 or 11) reeds. Waxing 1 block becomes a matter of a few minutes.

I've been looking for a "spoon" and have found this. Is this the tool you're talking about? Interesting idea.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Irons - my latest acquisition
« Reply #35 on: March 05, 2012, 10:57:12 PM »

I've never tried the spoon, but a curved eyedropper like the one in the link below and a water bath is what I use. Gives good control and keeps drips in control.
http://www.amazon.com/Fisherbrand-Medicine-Droppers-Curved-Length/dp/B001BU1ZLQ

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Irons - my latest acquisition
« Reply #36 on: March 06, 2012, 02:03:51 AM »

I've never tried the spoon, but a curved eyedropper like the one in the link below and a water bath is what I use. Gives good control and keeps drips in control.
http://www.amazon.com/Fisherbrand-Medicine-Droppers-Curved-Length/dp/B001BU1ZLQ

Have not seen this before.....what a great forum! ;D
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Irons - my latest acquisition
« Reply #37 on: March 06, 2012, 09:15:44 AM »

Thanks Steve. Do you use the standard soldering tip or something different - a blade tip of some kind?
The soldering iron came equipped with interchangeable tips of various diameters. I use the smallest one, filed down initially to about 1 mm dia. at the tip, then gently hammered flat so it resembles a small screwdriver blade.

My soldering iron seems to work very well for me and (thanks to advice from Theo and Rees  :|glug ) I have managed to get the job done pretty neatly. But I don't as yet do a lot of waxing. Up to present, I have just been removing a few reed plates to replace the valves on the underside, then rewaxing the plates back into place. However, I have a restoration project in mind, which will involve complete revalving and rewaxing of all the reed plates.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Irons - my latest acquisition
« Reply #38 on: March 07, 2012, 02:22:24 AM »

An encaustic stylus is really easy. You just plug it in, stick the point into a block of wax and then draw round the plate slowly. The stylus head acts as a nib and wax flows down it onto the block. Dead easy to use, consistent results and it uses a small quantity of wax, which I suspect makes a slight difference to the sound(?).

The other advantage is that it doesn't melt the wax too much, which reduces fumes (but you should still get a solder fume extractor just in case, or work in a very well ventilated space). However, the downside to this is that the wax doesn't flow as well as it does when hotter. Also the tool only works if in direct contact with the thing that you want to wax. These two things mean that you can't use it to let the wax seep into cracks. I have filed a spare tip away such that it can fit into tiny cracks, but it doesn't work terribly well.

So if the reedplates are very close together, as in a Preccy, you have only one option. You need to wax the inside edge of a plate and then press the next one down onto it before it dries. You can do this be modifying another head on an encaustic stylus so that it flows quickly, or you could use a manual batik pen or waxing spoon.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Irons - my latest acquisition
« Reply #39 on: March 07, 2012, 02:56:03 AM »

An encaustic stylus is really easy. (...)
The other advantage is that it doesn't melt the wax too much, which reduces fumes (etc)
Mine does get the wax fluid enough to fill small cracks, etc. It's true though that when the space in tight between reedplates it could be a challenge.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal