Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: Irons - my latest acquisition  (Read 17863 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Irons - my latest acquisition
« Reply #40 on: March 07, 2012, 01:01:28 PM »

A short silent video of me waxing the bass reeds on a Hohner bass block using a soldering iron.

http://youtu.be/dUaHU1vY8f0

Doesn't show the tidying up phase of which more than usual was needed due to trying to keep out of the way of the camera (well that's my excuse and I'm sticking too it  ;) )

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Irons - my latest acquisition
« Reply #41 on: March 07, 2012, 01:19:56 PM »

Lester.

That's very instructive. I can see several ways in which to improve my technique i.e. make it less b****y awful.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Irons - my latest acquisition
« Reply #42 on: March 07, 2012, 01:47:21 PM »

A short silent video of me waxing the bass reeds on a Hohner bass block using a soldering iron.
http://youtu.be/dUaHU1vY8f0
Excellent! Thanks, Lester.   :|glug
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Irons - my latest acquisition
« Reply #43 on: March 07, 2012, 02:24:40 PM »

This is another temperature controlled soldering iron that works very well.  I use the vertical blade that is visible in the picture on the box.  You can add precisely the amount of heat needed with the trigger. 
http://www.amazon.com/Weller-WEL8200PK-120-Volt-Universal-Soldering/dp/B00002N7S0
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Irons - my latest acquisition
« Reply #44 on: March 07, 2012, 03:36:07 PM »

This is another temperature controlled soldering iron that works very well.  I use the vertical blade that is visible in the picture on the box.  You can add precisely the amount of heat needed with the trigger. 
http://www.amazon.com/Weller-WEL8200PK-120-Volt-Universal-Soldering/dp/B00002N7S0
This is a "OFF-LOW-HIGH" kind of manual temperature control. I don't know about the "precise amount of heat" since it's more like a hit and miss trigger operation! I presume that even in the low (100W) position it's more than enough to melt the wax, since it's designed to melt tin solder...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Irons - my latest acquisition
« Reply #45 on: March 07, 2012, 03:47:47 PM »

This is another temperature controlled soldering iron that works very well.  I use the vertical blade that is visible in the picture on the box.  You can add precisely the amount of heat needed with the trigger. 
http://www.amazon.com/Weller-WEL8200PK-120-Volt-Universal-Soldering/dp/B00002N7S0
This is a "OFF-LOW-HIGH" kind of manual temperature control. I don't know about the "precise amount of heat" since it's more like a hit and miss trigger operation! I presume that even in the low (100W) position it's more than enough to melt the wax, since it's designed to melt tin solder...


I speak from experience not conjecture.  It works very well and makes a very neat job.  The tip heats quickly and cools quickly so even though the trigger is 'on-off' it is very easy to precisely control the temp of the tip.  All soldering irons are designed to melt solder.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #46 on: March 07, 2012, 04:52:24 PM »

Thank you Lester. A very helpful demonstration.

This thread is proving very instructive and helpful.  ;D ;D
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #47 on: March 07, 2012, 07:47:00 PM »

Not exactly the kind of work I like to do while being videotaped: http://www.youtube.com/watch?v=yjGaLwqrtOs&feature=youtu.be
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Irons - my latest acquisition
« Reply #48 on: March 07, 2012, 08:02:43 PM »

Not exactly the kind of work I like to do while being videotaped: http://www.youtube.com/watch?v=yjGaLwqrtOs&feature=youtu.be

That's a very neat job. Where did you get the spoon?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Irons - my latest acquisition
« Reply #49 on: March 07, 2012, 08:07:31 PM »

Not exactly the kind of work I like to do while being videotaped: http://www.youtube.com/watch?v=yjGaLwqrtOs&feature=youtu.be

I bow to a master  ;D

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #50 on: March 07, 2012, 08:14:52 PM »

@Rees: I make these "spoons" myself, using thin metal sheet.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Irons - my latest acquisition
« Reply #51 on: March 07, 2012, 09:00:56 PM »

@Rees: I make these "spoons" myself, using thin metal sheet.

Thank you Diatonix! I really enjoy seeing tools created by craftmen for their own use. It's wonderfully logical and simple. I'll be making one of these in the coming month.

Can we assume you solder the joints near the handle to keep the wax from leaking out?

Thank you very much for the video.

And a big heartfelt thank you to all the professionals and amateurs who share their work and techniques on this Forum. There is a great deal to learn about working on these instruments. The wealth of knowledge and willingness to share that knowledge is astounding. What an incredible group! I can't thank all of you enough.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #52 on: March 07, 2012, 09:35:55 PM »

You are welcome, Ed and yes, the joints are soldered. Actually the tool used in my video works better with the slightly thicker Italian reeds, that's why I'd suggest a spoon which is a bit more pointed when dealing with Hohner reeds. The spoon is even faster when gaps are small, such as in chromatic accordions, although then my technique is slightly different.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Irons - my latest acquisition
« Reply #53 on: March 07, 2012, 11:03:17 PM »

Thanks for the video.  I notice you seem to be pushing the plates firmly in place.  Is there already wax on the end to keep them from moving while you do the spoon thing ?
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Irons - my latest acquisition
« Reply #54 on: March 08, 2012, 08:06:02 AM »

Diatonix,

That's a fascinating demo and I like the look of the spoon and its product - in your hands, at any rate.

It's out with the brass sheet for me, and a soldering iron with solder this time.

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Irons - my latest acquisition
« Reply #55 on: March 10, 2012, 11:52:33 PM »

@Rees: I make these "spoons" myself, using thin metal sheet.

So is it just folded over at the bottom to form a reservoir and the wax flows out of the pointy end?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #56 on: March 11, 2012, 06:39:23 AM »

I prefer a flat v-shaped (triangular) bottom which makes it easier to wipe off wax that is not inside the reservoir, either on the rim of the wax heater or/and a newspaper. The u-shaped opening can easily be made narrower or wider, according to the nature of the work it is supposed to do. Since it is relatively easy to make such a "spoon" you may end up with a  collection of 3 or 4 of them, all slightly differently shaped.  
Impurities that are often present in the wax do sometimes clog the opening. Such a problem is rapidly solved with a thin steel strip.
« Last Edit: March 11, 2012, 07:02:39 AM by diatonix »
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Irons - my latest acquisition
« Reply #57 on: March 11, 2012, 05:21:07 PM »

Thanks again for posting the video, Olav.  I have not seen anyone else using this method, in my limited view. The tool you are using seems to open up great possibilities compared to using the 'spatula' or even a fancy electric iron, especially for production work. It seems to make perfect sense in this regard, but looks like it would require a good bit of practice to achieve the fine results that you are getting!
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Irons - my latest acquisition
« Reply #58 on: March 11, 2012, 05:42:02 PM »

Maybe it's too easy for me saying this, but I don't think it requires much more than two steady hands - and those are also needed when using a soldering iron & wax-stick.  Try it out with a couple of extra reeds on a spare block you may have lying around!
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Irons - my latest acquisition
« Reply #59 on: March 11, 2012, 05:53:03 PM »

The advantage of this method is that the holding and dispensing actions are combined into one unit, albeit with the heating element separate. This means that you only need one hand to apply. The soldering iron method combines the dispensing and heating element, but the holding element is separate, meaning that you need two hands. The encaustic stylus combines all three elements, which is convenient, but the method does have disadvantages as I detailed above. I still think that an encaustic stylus is a good addition to anybody's armoury, it is great for quick and easy repairs, say waxing in a single reedplate.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal