DON`T PULL YOUR WIRE!! 
Though unfortunately, that's sometimes the "best fix" for such problems!!!

(Though I'd
push it out, rather than pull it... )
Sticking keys are unfortunately very common with instruments made in Klingenthal (like this one), but it wasn't until I started going there, and dealing with some of the makers, that I came to understand why. The trouble is that the town is up in the mountains, right on the Czech border (the border post is down a side street!), and the air is extremely
dry there, so if you then take an instrument made under such conditions to a damper climate (especially a much damper climate, like we have in Ireland

) then actions are inclined to seize-up due to wood swelling.
Sometimes it's simply that the button has started to catch on the edge of its keyboard hole, in which case regluing it in such a way that it no longer does so will suffice, but often the wooden lever under the button has expanded, or twisted, or the slot has shrunk, so that it's sticking, and removal of the pin can become the best option to be able to smooth the offending woodwork. But it's not something that I'd undertake lightly...
