Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Repair-tools  (Read 2201 times)

0 Members and 1 Guest are viewing this topic.

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Repair-tools
« on: March 13, 2012, 03:31:23 PM »

http://www.ebay.nl/itm/150773976625?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

What do you think of this? I dont do any repairing myself, but cleaning the inside or something i can do. I would like such a tool.

But what do you use for it? i thought 20 euros (including sending) is a bit much? or am i wrong? (i've been known to be wrong more often :-) )
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Repair-tools
« Reply #1 on: March 13, 2012, 03:36:27 PM »

I think it is just a tool for pulling bellows pins. 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Repair-tools
« Reply #2 on: March 13, 2012, 03:56:31 PM »

I think it is just a tool for pulling bellows pins. 

Yep thats what I would think they are

These HERE probably just as good for €3 whaich are more or less what I use.

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Repair-tools
« Reply #3 on: March 13, 2012, 04:13:01 PM »

I use a small pair of joiners pincers (out of a kids tool set).  They are same shape as the ones shown on ebay and only lack the two little cut outs in the blades and the padded handles, neither of which are needed. 

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Repair-tools
« Reply #4 on: March 13, 2012, 04:48:03 PM »

The cutouts are presumably to avoid marking the pins.  I find you can achieve the same thing with the unmodified tool, simply by closing the jaws just enough so that they will catch the mushroom head on pulling, but not enough for them to grab the shaft (hope this makes sense).
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Repair-tools
« Reply #5 on: March 13, 2012, 05:03:44 PM »

The cutouts are presumably to avoid marking the pins.  I find you can achieve the same thing with the unmodified tool, simply by closing the jaws just enough so that they will catch the mushroom head on pulling, but not enough for them to grab the shaft (hope this makes sense).

Or you can cover the pin with some scrap material before grappling it, this also protects the casework in case the tool slips.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Repair-tools
« Reply #6 on: March 13, 2012, 05:27:56 PM »

I use a cheap carpet tack lifter. It works like a dream (and also works with lifting carpet tacks!)
http://www.ebay.co.uk/itm/Worldwide-Tools-Tack-Lifter-Brand-New-/360441195660?pt=UK_Hand_Tools_Equipment&hash=item53ebf82c8c
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Repair-tools
« Reply #7 on: March 13, 2012, 06:57:36 PM »

I use an old small pair of wire cutters with a curved face that allow a nice controlled leverage but always use a piece of shammy backed rigid plastic to protect the finish. I had a go with some of these once OK with groved pins in picture but can really damage the box surface if used on a ball head pin Ouch! AtB mory
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal