Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Magnets instead of button springs  (Read 14005 times)

0 Members and 1 Guest are viewing this topic.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Magnets instead of button springs
« on: March 25, 2012, 07:53:53 PM »

Hello everyone,

I've just been playing around with an idea for box design in my head and might have a go at implementing it on a wreck I've got lying around.  Is there any reason that you couldn't use 2 repelling magnets to get the buttons to spring back up and the pallets to close instead of using the regular springs? (I have broken 2 springs recently and am getting fed up with the fiddly process of getting new ones back in).

I'm aware of the major difference in that the force a good spring exerts is nearly linear over distance and that magnets have an exponential force with distance.  But I think that given the small distance of travel required within a button press and with the right strengths of neodymium magnets, a workable solution might be found that is less squeaky and with less parts that might fail over time.

Anyone played with this idea before?  Any good reasons why I shouldn't attempt this?

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Magnets instead of button springs
« Reply #1 on: March 25, 2012, 08:19:08 PM »

Anyone played with this idea before?  Any good reasons why I shouldn't attempt this?

Cheers

Squeezy

Not tried this specifically but was driven to see what you could do with Neodymium magnets after seeing Marc Serafini's clever use of them to provide a positive locking mechanism for the stops on some of his boxes. I have some  5mm x 5mm cylinder magnets. These are so strong I find it impossible to force them together with my fingers as they just slip sideways all the time so I would guess if solidly mounted, they would operate as you wish. The main problem I envisage is adjusting the strength of the "spring" to suit your playing style.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Magnets instead of button springs
« Reply #2 on: March 25, 2012, 08:44:37 PM »

I thought about that too Lester.  I think there are 2 main variables - the strength (size) of magnets used in the first place, and their distance from each other.  I think the main difficulty will be having them repelling enough to keep the pallets from opening under normal bellows pressures (I have this problem with some spring-equipped boxes with a light touch).

I too have dabbled with a few different sizes of neodymium magnets and use them to attach my microphones to my boxes with great success (much better than velcro).  I'm constantly amazed by their strength - I'm sure they could have a great many uses on a box.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Magnets instead of button springs
« Reply #3 on: March 25, 2012, 08:52:27 PM »

I think there are 2 main variables - the strength (size) of magnets used in the first place, and their distance from each other. 

The size also has an effect on the distance over which the magnetic force is big enough to be usable - smaller magnets work over a shorter distance, other things being equal.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Magnets instead of button springs
« Reply #4 on: March 25, 2012, 09:22:17 PM »

Theo "really understands" magnets (and melodeons!)* and should be listened to! I have a mental bloch on the theory, but it strikes me that a "magnetic spring" involves a magnet under the button, and however small, this will add inertia to it. Might make a box slower. At least springs don't have to "move", just compress.

I'll cross link this into the 20th Century Box thread

[edit] *forgot something important!
« Last Edit: March 26, 2012, 08:01:06 AM by Chris Ryall »
Logged
  _       _    _      _ 

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Magnets instead of button springs
« Reply #5 on: March 25, 2012, 10:07:51 PM »

Interesting idea. I most definitely do not understand magnets at all and am full of admiration for those that do. I agree about the issue of adjusting for playing style, but since only fairly serious players bother I think that it could be a workable solution. Theo, what do you think?

Matit flutes use magnets instead of their more usual needle springs. http://www.matitflutes.com/04keywork.html
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Magnets instead of button springs
« Reply #6 on: March 25, 2012, 10:37:20 PM »

Hot necessarily under the button, it could be under the lever but closer to the axle, where movement is less and magnet could be smaller.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Magnets instead of button springs
« Reply #7 on: March 25, 2012, 10:38:27 PM »

I thought about that too Lester.  I think there are 2 main variables - the strength (size) of magnets used in the first place, and their distance from each other.  I think the main difficulty will be having them repelling enough to keep the pallets from opening under normal bellows pressures (I have this problem with some spring-equipped boxes with a light touch).

I too have dabbled with a few different sizes of neodymium magnets and use them to attach my microphones to my boxes with great success (much better than velcro).  I'm constantly amazed by their strength - I'm sure they could have a great many uses on a box.

I have to say that this idea really intrigues me! Can't wait to hear about the experiments.

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Magnets instead of button springs
« Reply #8 on: March 25, 2012, 10:54:38 PM »

would they demagnetise  with age and/or use or if doing nothing for long periods or do they keep their "charge" or whatever its called indefinately??
george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Magnets instead of button springs
« Reply #9 on: March 25, 2012, 11:01:50 PM »

My intuition suggests you would have a more controllable and positive-feel set up if, as well as the magnet under the button to repel/push it back up, you also have a magnet on the pallet board to pull it shut/keep it shut. Otherwise you are relying on the repulsion of the under-button magnet to hold it shut when at its weakest (ie when the N and S are furthest away) .
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Magnets instead of button springs
« Reply #10 on: March 25, 2012, 11:15:54 PM »

Hi Sandy,

I thought about that too.  But I figured that the magnets holding it shut would be at their strongest when trying to press a button down - the effect being a sort of click/resistance in the system as you press the button which could really slow the keyboard down when playing.  Maybe a very weak magnet there would work.

I'm not sure about this at all - but I will have a play about with it - if it takes lots of other extra tweaks to make it work then it becomes a much less elegant solution and the traditional spring becomes the clear winner, which it probably is anyway as it's been used for nearly 200 years.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Magnets instead of button springs
« Reply #11 on: March 25, 2012, 11:20:42 PM »

Hot necessarily under the button, it could be under the lever but closer to the axle, where movement is less and magnet could be smaller.

That was where I was thinking of, Theo - the springs are generally as close to the axle as possible.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Magnets instead of button springs
« Reply #12 on: March 25, 2012, 11:45:57 PM »

The flute example that I gave shows that the theory is fine... but then on a flute, the pads are push closed, rather than push open. I think that Sandy's point is a good one.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Magnets instead of button springs
« Reply #13 on: March 26, 2012, 05:52:53 AM »

Interesting idea, but has anyone thought about the weight of putting, say, 42 magnets on the treble side of a melodeon for a typical 2-row box? Strong magnets, even small ones,  are usually heavy!  Let's say that each magnet weights 1/2 ounce (about 15 grams) , that's 21 ounces (around 630g) altogether! Not a negligible quantity. Springs are a lot lighter.
« Last Edit: March 26, 2012, 05:54:50 AM by Québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Magnets instead of button springs
« Reply #14 on: March 26, 2012, 08:14:28 AM »

We'd obviously use non magnetic material for the lever etc, but I have just a slight niggle about all these N/S poles in close proximity. There could be interactions? 

We can minimise these by offsetting them - then we could end up with slightly different pressure to the finger?

Compensate by having standard lever lengths to each row? Now it's multiple pivots and knock on effects at the pad ends. It ain't trivial! 

I'm personally now thinking toward .. perhaps silicone spheroids in tough elastic capsules? As it happens such can presently be bought very cheaply from "breast augmentation supplies EURL" of Paris  >:E
Logged
  _       _    _      _ 

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Magnets instead of button springs
« Reply #15 on: March 26, 2012, 09:55:16 AM »

I personally think i, taking into account the added weight  &  probably cost - all those  magnets produced in relatively small quantities would not come as cheap as 'standard' size magnets produced by the million.   In over 50 years of playing a veriety of boxes I have never broke a spring so reliability does not seem to be a problem for me anyway.  Perhaps this is  something to do with only using a very small amount of the springs travel  pressing the button just enough to get the pallet off the board  rather than attempting to shove the button down the hole!  ( I have however never done this conciously in order to prolong spring life!)

Good quality springs of all shapes & sizes can be made to  do millions of reversals without breaking  just think  about the number of reversals per second a valve spring has to do on a  high reving modern motorbike engine.

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Magnets instead of button springs
« Reply #16 on: March 26, 2012, 10:28:25 AM »

Some slightly un-scientific measurements (ie used TSMB's kitchen scales)

weight of 5mm x 5mm neodymium magnet 1~2g so assuming two 21 buttons and 2g = 42x2= 82g (or~3oz for old people)

force exerted with the magnets as close as I could hold them to each other = 500g
force exerted with the magnets 5mm* apart from each other = 150g

*typical button travel distance on my boxes

As a comparison the force placed on the chord pallet of a Hohner is 150g (only happen to have a bass mech available for comparison  but I assume that as it is a bigger pallet with three air holes it would require more force to hold it down than a treble pallet?)

Mechanical advantage of treble end, assuming the magnets are mounted at the button end of the mechanism, and on a Hohner Pokerwork,:
the D row has a 5.5cm button lever and 8cm pallet lever giving a mechanical advantage of 1.45
the G row has a 4.5cm button lever and 4cm pallet lever giving a mechanical advantage of 1.125

Therefore at 5mm spacing you should get 170g closing force on the G row and 220g closing force on the D row, which should be more than enough?

So, assuming my schoolboy mechanics are correct, the measurements are not to specious, and someone could design a suitable mechanism, it looks more than doable  ;D
« Last Edit: March 26, 2012, 11:38:47 AM by Lester »
Logged

IanD

  • Hero Member
  • *****
  • Online Online
  • Posts: 1703
  • Too many melodeons...
Re: Magnets instead of button springs
« Reply #17 on: March 26, 2012, 11:51:52 AM »

Hello everyone,

I've just been playing around with an idea for box design in my head and might have a go at implementing it on a wreck I've got lying around.  Is there any reason that you couldn't use 2 repelling magnets to get the buttons to spring back up and the pallets to close instead of using the regular springs? (I have broken 2 springs recently and am getting fed up with the fiddly process of getting new ones back in).

I'm aware of the major difference in that the force a good spring exerts is nearly linear over distance and that magnets have an exponential force with distance.  But I think that given the small distance of travel required within a button press and with the right strengths of neodymium magnets, a workable solution might be found that is less squeaky and with less parts that might fail over time.

Anyone played with this idea before?  Any good reasons why I shouldn't attempt this?

Cheers

Squeezy

The real problem is that -- as you say -- the magnetic force would be a very strongly nonlinear function of the travel, try playing around with magnetic catches (or neo magnets) to see this. Assuming you want most force to hold the pallet closed, this would then drop off rapidly as it opened giving a very "sticky" feel to the action.

The only way round this is to use strong magnets separated by some distance so the fractional change in spacing is small. You could use a single long bar magnet (like a very wide magnetic catch -- if fact why not just use a long line of these, they're cheap enough?) and add soft iron plates to all the levers, then there wouldn't be any risk of interaction.

I can't help thinking this is a messy way to solve something that isn't a real problem, springs done properly (not Hohner!) don't break -- I haven't had a treble spring on any of my boxes (Oakwood, Castagnari) break in more than 20 years. If springs are breaking I'd say by far the best solution is to use a properly engineered spring ;-)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Magnets instead of button springs
« Reply #18 on: March 26, 2012, 12:20:31 PM »

I agree Ian, I've been full time repairing sings 2004 and in that time I have replaced some Hohner springs, but I can't recall replacing a single broken spring in an Italian box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Magnets instead of button springs
« Reply #19 on: March 26, 2012, 02:14:37 PM »

The only spring I've ever broken in about 35 years of playing was a bass spring on a 2nd-hand Hohner 4-stop 1-row.  I've no idea how old that box is - I'm still playing it after owning it for over 25 years and never had another spring breakage. All my other boxes still have their full complements of original springs.  I wonder what it is that makes spring breakage a problem for some and not for others?  My boxes tend to get a hard life, playing in fairly loud ceilidh bands and outdoors for morris.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal