Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Removing old bellows tape  (Read 14066 times)

0 Members and 1 Guest are viewing this topic.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Removing old bellows tape
« Reply #20 on: March 21, 2014, 08:05:30 PM »

I use Aileen's fast grab tacky glue. It works great with leather and thins easily.
http://www.amazon.com/gp/aw/d/B000BY6TI2

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Removing old bellows tape
« Reply #21 on: March 23, 2014, 04:51:03 PM »

We use the Franklin liquid hide glue at the shop. Make sure to check the expiration date on the bottle tho'. I get the tape off by "painting"it with 50/50 alcohol water mix , as this soaks through the tape well, takes two applications on the tape and then it mostly comes off easy.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Removing old bellows tape
« Reply #22 on: October 17, 2015, 11:48:14 AM »

I'm in the middle of a bellows re-taping. This, another thread on here and Lester's videos too have been a great help so far.

I'm taking it nice and slowly....

Before I start the re-taping process, I'm wondering about the worn bellows edges. This is a Hohner 4-stopper, and the back lower edges are very worn. The three nearest the lower  treble edge have splits up to 3cm long on their folds.

So - my question is  - is it wise to fill these folds with cardboard stuck to the backside before re-taping? Somewhere else on here I've seen talk of using Cornflake packets. Should I use the same glue as for the bellow tapes (Charlie Marshall sold me on his special italian bellows tape adhesive)?

Another worry, and something I'm putting off slightly is the last tape where the bellows meet their .. plate wot fits to the ends. In Lester's video he spends a lot of time poking a scalpel down the slit in that join - is it to just try and remove the tape or to make the gap a bit bigger so you can fit a tape down it?

This slit will be sealed anyway, so the tape on this last edge is mostly cosmetic?

thanks - I've not lost my temper yet. (I'm only about 3 hours in...).

Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removing old bellows tape
« Reply #23 on: October 17, 2015, 12:10:47 PM »

I'm in the middle of a bellows re-taping. This, another thread on here and Lester's videos too have been a great help so far.

I'm taking it nice and slowly....

Before I start the re-taping process, I'm wondering about the worn bellows edges. This is a Hohner 4-stopper, and the back lower edges are very worn. The three nearest the lower  treble edge have splits up to 3cm long on their folds.

So - my question is  - is it wise to fill these folds with cardboard stuck to the backside before re-taping? Somewhere else on here I've seen talk of using Cornflake packets. Should I use the same glue as for the bellow tapes (Charlie Marshall sold me on his special italian bellows tape adhesive)?

I would reinforce the split with cereal box card using the existing corners of the cereal box for the fold. If the bellows are seriously eroded I try to place another fillet of cereal box in the missing area after the reinforcement has been glued in place. This can then be shaped (sanded) to make up for the missing material prior to taping. I use PVA to stick the cardboard in place, and the tape come to that.
Quote
Another worry, and something I'm putting off slightly is the last tape where the bellows meet their .. plate wot fits to the ends. In Lester's video he spends a lot of time poking a scalpel down the slit in that join - is it to just try and remove the tape or to make the gap a bit bigger so you can fit a tape down it?

This slit will be sealed anyway, so the tape on this last edge is mostly cosmetic?

thanks - I've not lost my temper yet. (I'm only about 3 hours in...).

Steve

You have discovered what I consider the hardest part of taping. Yes I do spend ages cleaning out the bellows/frame junction and it is to remove old tape and open the joint to insert the new tape. Once the new tape is fitted and dry I usually open the gap between the new tape and the frame and run a small amount of superglue into the gap and the clamp it up (be careful of where the glue goes!)

I feel your pain as I have just embarked on the third set of pokerwork bellows this week  :(

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Removing old bellows tape
« Reply #24 on: October 17, 2015, 01:15:50 PM »

Just as enjoyable as Oakham picking.  :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removing old bellows tape
« Reply #25 on: October 17, 2015, 01:58:26 PM »

Just as enjoyable as Oakum picking.  :o

FTFY

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Removing old bellows tape
« Reply #26 on: October 17, 2015, 02:04:50 PM »

.......another fillet of cereal box in the missing area after the reinforcement has been glued in place. This can then be shaped (sanded) to make up for the missing material prior to taping. I use PVA to stick the cardboard in place, and the tape come to that.

.............
I feel your pain as I have just embarked on the third set of pokerwork bellows this week  :(

Wow! - in the  nick of time thanks Lester.

This "fillet" goes on the outside then? ie to build up the fold where the belt buckle has gouged some material out?

I'm quite enjoying it to be honest - I'm on a reasonable roll now. I was originally planning to do  4, or 5, or 6 folds that were the worst, but I've stripped one whole side now. Put some music on, turn it up loud, the wife and kids have abandoned me for the day - what could be more enjoyable eh?  ;D

thanks Lester


Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removing old bellows tape
« Reply #27 on: October 17, 2015, 02:10:22 PM »

This "fillet" goes on the outside then? ie to build up the fold where the belt buckle has gouged some material out?

Yep

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Removing old bellows tape
« Reply #28 on: October 17, 2015, 03:29:52 PM »

Wow.  The more I read about how long it takes to strip the tape off a bellows, the more convinced I become that it's not cost effective to do more than the few folds that are suffering buckle rash!  I wonder what the Chinese Pokerwork bellows that CJM  are selling are like?  Or there's that guy on ebay who makes to order...

One of our band had such softened bellows that he stuck a wire coat hanger inside to stop them closing in on themselves! I think he eventually got a new set, they had a hard life as the box was an octave below a normal D/G.

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removing old bellows tape
« Reply #29 on: October 17, 2015, 03:51:09 PM »

I wonder what the Chinese Pokerwork bellows that CJM  are selling are like?  Or there's that guy on ebay who makes to order...

If Charlie's Chinese PW bellows are the same as come on a Chinese PW they are to be avoided as they appear to have bellows tape made of bog paper. Whereas Igor Trgovina's bellows seem to be fine, he made a set for a customer's Black Pearl and said customer was more than happy with them.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Removing old bellows tape
« Reply #30 on: October 17, 2015, 04:38:42 PM »

Absolutely, the bellows on my Chinese PW are nearly wrecked after quite a short life.  But Charlie has some other supplier offering bellows with black taping with a white diamond design (for £105):

http://www.cgmmusical.co.uk/CGM_Musical_Services/Recent_Arrivals.html#20

Rob.
« Last Edit: October 19, 2015, 10:58:48 AM by Rob2Hook »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removing old bellows tape
« Reply #31 on: October 17, 2015, 04:56:21 PM »

Absolutely, the nellows on my Chinese PW are nearly wrecked after quite a short life.  But Charlie has some other supplier offering bellows with black taping with a white diamond design (for £105):

http://www.cgmmusical.co.uk/CGM_Musical_Services/Recent_Arrivals.html#20

Rob.

Would still go for Igor's bellows as they are most probably better made and hardly anymore expensive.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Removing old bellows tape
« Reply #32 on: October 17, 2015, 05:39:16 PM »

Wow.  The more I read about how long it takes to strip the tape off a bellows, the more convinced I become that it's not cost effective to do more than the few folds that are suffering buckle rash! 

Having thought that the whole process of removing/replacing bellows tape was the most tedious job in the melodeon world, I have now discovered an even worse task. Stripping the tape off a Koch/Hohner I found that its builders really - I mean REALLY - didn't intend it to come off. The result is that much of the bellows paper has come away with the tape. Now I'm in the middle of stripping away all the bellows paper prior to replacing with new. Have you any idea how long it takes with a small paintbrush, soft sponge, warm water, a scalpel and a soft-edged scraper to strip a 2915-sized bellows...??

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: Removing old bellows tape
« Reply #33 on: October 17, 2015, 10:10:50 PM »

Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Removing old bellows tape
« Reply #34 on: October 18, 2015, 06:10:29 AM »

or you can buy something like this  8)

http://www.ebay.co.uk/itm/231720835027?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I could indeed - in fact I have a couple of 2915 bellows in my stock of spares - but there is nothing structurally wrong with the Koch bellows and it seems criminal to destroy the historical integrity of the instrument. Anyway, think of  the sense of satisfaction when the job's done!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Removing old bellows tape
« Reply #35 on: October 19, 2015, 09:07:45 AM »

On the subject of bellows repair... How do you repair a worn corner? I've got a replacement metal corner but the actual corner itself has separated. So in bellows construction I think diamond shaped bits of skin are used to seal the folding corners, but where it all comes to the corner apex..how is that sealed and what's the best way to repair it? With new skin on either side? In which case how do you get an airtight seal?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Removing old bellows tape
« Reply #36 on: October 19, 2015, 09:11:38 AM »

Corners are the hardest place to repair.  If cardboard is missing or has gone soft then I usually consider that grounds for replacing the whole bellows.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Removing old bellows tape
« Reply #37 on: October 19, 2015, 09:23:40 AM »

Most of the card is still there. This is on a nice Hohner Carena PA, except for the bellows, but I'll probably get fined now for mentioning PA on here. (:)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Removing old bellows tape
« Reply #38 on: October 19, 2015, 09:28:07 AM »

You could paste a very thinly pared strip of leather at the apex and while still drying fit the metal corner.

By the way you can stiffen up soft cardboard by soaking it in paste, forming it back to shape and letting it dry. On book board corners when worn the cardboard delaminates, so in with the paste and then smack it with a hammer, reform with a bone folder and let dry.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Removing old bellows tape
« Reply #39 on: October 19, 2015, 10:00:23 AM »

Ah Nick. You are a clever fellow. Thanks.
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal