Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Raising the volume of the inner row  (Read 5695 times)

0 Members and 1 Guest are viewing this topic.

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Raising the volume of the inner row
« on: April 05, 2012, 10:04:27 PM »

I’ve been experimenting with simple ways to try and to raise the volume of the inner row, and found that removing the keyboard cover or making a sort of keyboard grill, (lots of holes in the keyboard cover close to the grill), did manage to raise the volume of the inner row slightly. It often becomes more apparent when removing the keyboard cover completely. I find this effect to have been most noticeable on 3 and 4 voice boxes. The effect of removing the keyboard cover is clearly noticeable when played live, but when recorded I often can’t recognise that same effect…

So now I wonder am I imagining things or have other had the same experience?
Logged
Sweden, Skåne

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Raising the volume of the inner row
« Reply #1 on: April 06, 2012, 02:08:58 AM »

There are old video recordings of young Tony MacMahon playing his Paolo Soprani without the keyboard cover...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Raising the volume of the inner row
« Reply #2 on: April 06, 2012, 11:41:42 AM »

Yes, and now I wonder why the solution with a more grill like keyboard cover hasn't been more widely used?

I seriously started to wonder after playing a Beltrami Seabhac III which has a small keyboard grill, I didn't imagine this to have any major effect on the sound, but mainly put there for decorative reasons. But testing to cover the keyboard grill with first tape and later tape and a thin neopolen layer, it clearly effected the sound of the inner row. And also I noticed when I played a Sonola without the keyboard cover, (for repair reasons), the sound of the inner row was clearly less muted.
« Last Edit: April 06, 2012, 12:47:57 PM by Hasse »
Logged
Sweden, Skåne

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Raising the volume of the inner row
« Reply #3 on: April 06, 2012, 02:19:06 PM »

I have a Castagnari Trilly which has a keyboard grille - indeed the decoration is probably the minimum required to hold the panel together!  It also has openings all along the curved upper edge to the grille.  It has a notably clear tone and good balance between the rows.  I hav been delighted with it from the day it arrived, in fact I think I came close to losing my job when I spent half the morning hiding in the warehouse playing it!

Rob.
Logged

strad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 418
Re: Raising the volume of the inner row
« Reply #4 on: April 06, 2012, 02:46:02 PM »

I've seen Brendan Begley in concert remove the treble side grill on one of his boxes. There was a noticeable difference in the sound overall with no grill giving a (to me) better sound.

Nigel
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Raising the volume of the inner row
« Reply #5 on: April 07, 2012, 03:07:19 PM »

It also stops resonances in the keyboard cavity, which can detract from the sound.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Raising the volume of the inner row
« Reply #6 on: April 07, 2012, 05:51:30 PM »

My Beltuna Sara II, has a perforated grille on the back of the keyboard. It acts almost like a monitor when playing.

 Creating a similar thing for my Hohner Primatona is my  next little project. Hopefully it will bring a little more balance to the difference in sound of the two rows, (i.e.) brighten the inner row.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Raising the volume of the inner row
« Reply #7 on: April 08, 2012, 08:46:33 PM »

This is interesting! I've noticed this unbalance is often more apparent in 3 and 4 voice, when playing with the reeds in the middle reedblocks out, if three voice LMM and the L reeds out:

MMMMMMM
LLLLLLLLLL
MMMMMMM

The muted effect on the inner row of course partly caused by the difference in the pallets opening, but also psychically muted by the closeness of keyboard.
It also stops resonances in the keyboard cavity, which can detract from the sound.
If you got a more compact keyboard like on a Hascy or one row cajun without much cavity, wouldn't you eliminate most of this resonance?

My Beltuna Sara II, has a perforated grille on the back of the keyboard. It acts almost like a monitor when playing.

 Creating a similar thing for my Hohner Primatona is my  next little project. Hopefully it will bring a little more balance to the difference in sound of the two rows, (i.e.) brighten the inner row.
I've tried something similar, (very crude drill hole grill), back and front of keyboards and also found a difference in sound. That's also why I've started to wonder why the different makers don't do this more, an apparently rather simple way to get a slightly more balanced instrument. But of course maybe the effect is too small in many boxes to bother.
Logged
Sweden, Skåne

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Raising the volume of the inner row
« Reply #8 on: April 09, 2012, 06:59:04 AM »

ole grill), back and front of keyboards and also found a difference in sound. That's also why I've started to wonder why the different makers don't do this more, an apparently rather simple way to get a slightly more balanced instrument. But of course maybe the effect is too small in many boxes to bother.

Guillard has holes (other end too)
Logged
  _       _    _      _ 

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Raising the volume of the inner row
« Reply #9 on: April 09, 2012, 12:16:43 PM »

It also stops resonances in the keyboard cavity, which can detract from the sound.
If you got a more compact keyboard like on a Hascy or one row cajun without much cavity, wouldn't you eliminate most of this resonance?

Well you'd change the frequency, yes.Smaller volume means higher resonance. And smaller keyboards generally aren't noticeable. I should have said "stops resonances", it actually raises the frequency such that it doesn't affect the sound.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Raising the volume of the inner row
« Reply #10 on: April 09, 2012, 09:09:58 PM »

This sort of perforated back plate is quite common, but not universal, on Paolo Soprani two row boxes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Raising the volume of the inner row
« Reply #11 on: May 10, 2012, 02:42:40 PM »

The simple option is to Reduce the volume of the outer row! Put a layer or two of the felt/leather that Charlie Marshall sells for facing pallets underneath the outer row buttons. You'll find that the outer row pallets don't ipen as far, hence they are quieter! You might have to reset the pallets to get them to seal properly. Easy job with a bit of hot glue gun work.
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Mcgrooger

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 833
  • Northern Roots
Re: Raising the volume of the inner row
« Reply #12 on: May 10, 2012, 04:47:11 PM »

Easy job with a bit of hot glue gun work.

The day I take a hot glue gun to one of my boxes is probably the day I'll be searching 'Buy and Sell' for a new box! (The cack-handed McG) :-[
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Raising the volume of the inner row
« Reply #13 on: May 11, 2012, 01:42:06 PM »

Better tell Theo - it was his recommendation for sticking pallets to levers......
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Raising the volume of the inner row
« Reply #14 on: May 11, 2012, 02:23:58 PM »

Better tell Theo - it was his recommendation for sticking pallets to levers......

Yes make a very nice neat job of that task, a bit of flexibility, and can be removed without damage at a later date if necessary. I might want something prettier of the pallets were on view.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Raising the volume of the inner row
« Reply #15 on: May 11, 2012, 02:46:22 PM »

I've used wax, which with a stylus is just as easy, just as robust and just as removable. But without a stylus it can get quite messy.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Raising the volume of the inner row
« Reply #16 on: May 12, 2012, 07:11:01 PM »

I know there are several different ideas/solutions around to raise the volume of the inner row to even the balance between the rows. Most of the solutions involving different approaches to the mechanics around lifting the pallets. I have just been wondering if these solutions might be unnecessary with more extensive use of keybordgrills, but as I've been explained by some makers - it is often not as simple as that, always more factors to take into account when it comes to sound - So for now I'll just go back to playing and repairing, and keep the a keen EAR to what the melodeon makers come up with next. I'm certain a new detail improvement are being designed as we speak  ;)

The simple option is to Reduce the volume of the outer row! Put a layer or two of the felt/leather that Charlie Marshall sells for facing pallets underneath the outer row buttons. You'll find that the outer row pallets don't ipen as far, hence they are quieter! You might have to reset the pallets to get them to seal properly. Easy job with a bit of hot glue gun work.

Well, I guess that's an option if you want to achieve a better balance between rows by muting the outer row, and not by raising the volume of the inner row...
Logged
Sweden, Skåne

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Raising the volume of the inner row
« Reply #17 on: May 14, 2012, 02:40:32 PM »

It achives the same end goal - balancing the volume of the two rows!   :||:
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Raising the volume of the inner row
« Reply #18 on: May 15, 2012, 10:03:35 AM »

I've just taken the grille off mine. I've had a few comments about the volume now.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Raising the volume of the inner row
« Reply #19 on: May 15, 2012, 10:52:14 AM »

pardon???  ;D
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal