Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: internal microphone  (Read 8643 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: internal microphone
« Reply #20 on: April 15, 2012, 12:35:23 PM »

As has been said before, a high quality (hypercardioid?) stand mic is probably the best solution for the treble end.

I did exactly this with a Beyer M201 for a while, then discovered that the ubiquitous Shure SM57 works just as well. The hypercardioid response of the M201 would help if you have high foldback levels, but without drums or other loud instruments in the band I don't have that problem. Plus the SM57 is a cheap and robust microphone!

Agreed, but even if you don't have the foldback very loud it's still better to reject monitor feedthrough as much as possible -- trust me, from the sound desk it makes it much easier to get a clean sound. And since monitors are usually nowhere near the 180 degree null in a cardioid pattern, hypercardioids have nulls off the rear axis which means you can get the monitor near one.

Better feedback rejection means you can have the mic further away (I aim for a foot or so) which gives more even pickup of all the notes and less obvious action noise, also less sensitivity to volume changes caused by moving the box around while playing.

In other words a decent cardioid mike is OK, but a hypercardioid one is better :-)

(Animal Farm, anyone?)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: internal microphone
« Reply #21 on: April 15, 2012, 12:56:37 PM »

...I don't see how fitting the element from a boundary microphone has much to do with anything other than the inherent qualities of the capsule on its own.

No, not just the capsule, but the mount is used attached to the casing as its boundary plate.  Although not optimal, in that the bass plate is not as large as the ideal, it still seems to offer the non-directional and bass emphasis properties that would otherwise recommend it.

Of course, it is perfectly possible to buy a capsule and set it into a piece of wood with a step cut in it to achieve the same effect.  Whilst I have come to prefer using stand mics (paticularly when changing boxes) the original question wanted suggestions as to a bass end internal mic.

Rob.
Logged

Musicaljohn1

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: internal microphone
« Reply #22 on: April 15, 2012, 01:02:37 PM »

Jeff Dando amplified my Salterelle. I've never had a problem, both bass and treble end are perfectly amplified. I just plug in the bottom of the box and away I go. I can also turn up and down bass and treble independently from a switch box in between my box and the desk. JD also amplified John Kirkpatrick's BCC# the same way.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: internal microphone
« Reply #23 on: April 16, 2012, 08:46:54 AM »

Jeff Dando amplified my Salterelle. I've never had a problem, both bass and treble end are perfectly amplified. I just plug in the bottom of the box and away I go. I can also turn up and down bass and treble independently from a switch box in between my box and the desk. JD also amplified John Kirkpatrick's BCC# the same way.

And a very professional looking installation it is too, as I have it open on my tuning bench at the moment.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: internal microphone
« Reply #24 on: April 16, 2012, 12:45:25 PM »

I've used the element from a Tandy PZM (which is now unavailable) for years, fitted internally to the bass end, and it's worked very well.  Recently I've had problems with the power supply (a rather nasty little plastic box containing a AA battery), and the band's sound engineer has made a phantom power converter (based on a design found on the internet).  This worked brilliantly for a while, and then didn't, so I'm hoping it hasn't done something terminal to the element :(  If it has, I might be tempted by the T-bone mentioned elsewhere.

On the treble end I use an AKG 516 gooseneck.  I used to have its predecessor, the 416, which was always breaking, as Rob2Hook complains.  The new model seems much more robust.  The 416 fits better onto a concertina though.

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: internal microphone
« Reply #25 on: April 16, 2012, 01:43:41 PM »

I've used the element from a Tandy PZM (which is now unavailable) for years, fitted internally to the bass end, and it's worked very well.  Recently I've had problems with the power supply (a rather nasty little plastic box containing a AA battery), and the band's sound engineer has made a phantom power converter (based on a design found on the internet).  This worked brilliantly for a while, and then didn't, so I'm hoping it hasn't done something terminal to the element :(  If it has, I might be tempted by the T-bone mentioned elsewhere.

On the treble end I use an AKG 516 gooseneck.  I used to have its predecessor, the 416, which was always breaking, as Rob2Hook complains.  The new model seems much more robust.  The 416 fits better onto a concertina though.

When they were available I used PZMs a lot. There were many ways to extend the range of possible uses. Two PZMs centrally mounted on 3ft square hinged boards made an adjustable stereo pair. Attached to a boom they were good for recording percussion or for drum overheads.

It was also common to replace the small battery with a larger one giving a more sensitive response.  With this in mind I see no reason why using phantom power should have any detrimental effect.
Logged
Semper idem, sed non eodem modo

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal microphone
« Reply #26 on: April 16, 2012, 03:15:34 PM »

It was also common to replace the small battery with a larger one giving a more sensitive response.  With this in mind I see no reason why using phantom power should have any detrimental effect.

If converted correctly. Electret mics typically have a maximum voltage rating of about 15 Volts; phantom power is 48 Volts open circuit, so the phantom converter needs to be working properly.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: internal microphone
« Reply #27 on: April 16, 2012, 04:00:00 PM »

It was also common to replace the small battery with a larger one giving a more sensitive response.  With this in mind I see no reason why using phantom power should have any detrimental effect.
If converted correctly. Electret mics typically have a maximum voltage rating of about 15 Volts; phantom power is 48 Volts open circuit, so the phantom converter needs to be working properly.
That's why there is usually a visible warning symbol next to the phantom power on/off switch on a mixing board! Some devices can be zapped if they are not wired properly or able to "ignore" the phantom power. By the way, the IEC standard includes specs for 12, 24 and 48v phantom power.

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal microphone
« Reply #28 on: April 17, 2012, 08:36:24 AM »

By the way, the IEC standard includes specs for 12, 24 and 48v phantom power.

Yes, but have you ever seen a mixer or preamp that offered a choice?

(not counting the M-Audio Audio Buddy whose P48 is so weedy it's more like "P36" )
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: internal microphone
« Reply #29 on: April 17, 2012, 08:48:34 AM »

It was also common to replace the small battery with a larger one giving a more sensitive response.  With this in mind I see no reason why using phantom power should have any detrimental effect.

If converted correctly. Electret mics typically have a maximum voltage rating of about 15 Volts; phantom power is 48 Volts open circuit, so the phantom converter needs to be working properly.

I'm totally ignorant where electronics are concerned, but I believe it was stepped down to 12v or possibly 6v - well within tolerance anyway.  It's a bit of a mystery why it's stopped working.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal microphone
« Reply #30 on: April 17, 2012, 11:59:52 AM »

I'm totally ignorant where electronics are concerned, but I believe it was stepped down to 12v or possibly 6v - well within tolerance anyway.  It's a bit of a mystery why it's stopped working.

I was speculating on something having gone wrong in the electronics, like a broken connection or short, or possibly a momentary voltage surge when plugged into an already live phantom powered input (there will be a capacitor somewhere that could have this effect)
Also electrets sometimes just die. Especially if they get damp, but sometimes for no apparent reason.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: internal microphone
« Reply #31 on: April 17, 2012, 12:57:10 PM »

By the way, the IEC standard includes specs for 12, 24 and 48v phantom power.

Yes, but have you ever seen a mixer or preamp that offered a choice?

(not counting the M-Audio Audio Buddy whose P48 is so weedy it's more like "P36" )

See this most often on broadcast and field recording equipment -
http://www.shure.com/americas/products/mixers-dsp/fp33-three-channel-stereo-mixer
or AV and conference equipment like audio technica mx341a http://www.audio-technica.com/cms/resource_library/literature/7bb55cf7c7902ca0/at_mx341a__om.pdf

Sometimes also see 18V phantom associated with video eg  http://www.rolls.com/product.php?pid=MX36&PHPSESSID=a0fc36ecc184e78ae8c83313587750ee and things like the AKG B18.

I guess that the lower voltages come originally from battery-powered equipment.

Howard



Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal microphone
« Reply #32 on: April 17, 2012, 01:58:24 PM »

I sit severely corrected !
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

timkins

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: internal microphone
« Reply #33 on: April 25, 2012, 10:54:14 PM »

I used to use the Radio Shack electrets on the bass end but broke a couple and it was a faff doing the phantom conversions so now I use a pair of CC75s which are great, especially at that price. I'm probably going to move to AKG C516s but that's for wireless. Never got on with Microvox.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal