Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Pokerwork fettling  (Read 12758 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Pokerwork fettling
« Reply #40 on: April 18, 2012, 12:28:28 PM »

While we're on the semantics of nomenclature, I think the more original generic term for all these boxes is a "Vienna" type.  This includes the one-row and two-row variants.  The four-stop models would originally have been called "Saxony" models.  OK, language moves on and all that, but Pokerwork is the anglicised name for the Goldbrand models.  As they said in "Soap" - "Confused?  You will be..."

The various Hohners I have in this size range have the same bellows dimensions, although the 4-stops have a cut-away in the frame to clear the stops.  This includes the 2915 2-row pokerwork, the 1040 1-row Pokerwork and three HA114 4-stops.  There doesn't seem to be any sense to the number of bellows folds for each model - the 4-stop in G is the most air hungry and has the fewest folds!  Although I have short arms and can't always make full use of the length of bellows, I always prefer the maximum length so I'm not pulling them too far and fighting to over-extend them.

The earliest models are probably the Saxony type and as such perhaps the nomenclature should be based on the original German terminology, but as there have probably been many more PAs manufactured over the years it's not surprising that the Italian terms are commonly used.

Rob
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Pokerwork fettling
« Reply #41 on: April 18, 2012, 12:41:37 PM »

The 1140 is a very easy box to strip and rewax and is a very good one to start with. Haven't tried tuning it yet, but at least the reeds are accessible, even if you can't remove the pans.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork fettling
« Reply #42 on: April 18, 2012, 12:51:27 PM »

The 1140 is a very easy box to strip and rewax and is a very good one to start with. Haven't tried tuning it yet, but at least the reeds are accessible, even if you can't remove the pans.

They are a right pain to tune as the suck reeds are hard to access to sharpen until you have perfected the art of lifting the reeds by either the German or Italian methods.

Theo's photos of the above
« Last Edit: April 18, 2012, 12:55:24 PM by Lester »
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Pokerwork fettling
« Reply #43 on: April 18, 2012, 01:10:11 PM »

It`s funny that the "saxony" (a dirty word thesedays regarding old boxes) models are the only 1 rows to survive (the new Arietta is the "Morgane" version I guess) and I`ve only seen 4 stops new ...

I`ve resisted Pulling the pins yet as I`m dreaded being greeted with Lesters "British RailSandwich" valves -

Owen, I`ll wait til you`ve tuned yours and posted the idiots guide to tuning the Suck reeds before I give it a go . it`s a shame the Pans don`t remove because tuning would be a doddle, easier than block mounted reeds as there`d be no re-waxing.

I`ve just been cleaning up and playing the thing so far, straightened a couple of bass rods, replaced the bellows straps, added shoulder strap rings etc so far.
« Last Edit: April 18, 2012, 01:11:45 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Pokerwork fettling
« Reply #44 on: April 18, 2012, 01:31:46 PM »

OK, I pulled the Pins ..

it has mostly acetate valves, a couple of "ham sandwich" leather ones on the bass end, two reeds have been pulled at some stage (removed and replaced) the pics show the rest of the state of the thing which looks pretty good to me . maybe later than I thought in age ? (due to the acetate valves) ..

Logged
Q: How do you cure MAD?
A: Buy more Boxes

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Pokerwork fettling
« Reply #45 on: April 18, 2012, 04:04:02 PM »

Except the plastic valves are replacements?
(Looks as though it has been rewaxed, so hopefully the invisible have been changed)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork fettling
« Reply #46 on: April 18, 2012, 04:08:17 PM »

OK, I pulled the Pins ..

it has mostly acetate valves, a couple of "ham sandwich" leather ones on the bass end, two reeds have been pulled at some stage (removed and replaced) the pics show the rest of the state of the thing which looks pretty good to me . maybe later than I thought in age ? (due to the acetate valves) ..

Looks to be in good condition, as an bosca ceoil said doesn't look like you are the first to be in there so if you are lucky the tuning may not be so bad either.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Pokerwork fettling
« Reply #47 on: April 18, 2012, 04:19:46 PM »

It`s funny isn`t it - you get a box which is so minging on the outside (that grille before I cleaned it for a start) that it`s just "Got" to be never opened, all original - I mean who`d have all the valves changed and the reeds tuned and leave the rotten leather belows straps & bass strap untouched and the thing covered with nicotine or whoknowswhat...

Good news for me, the only things which need doing inside is to replace a couple of bass valves and re-wetten the tuning of one note on the pull
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork fettling
« Reply #48 on: April 18, 2012, 04:21:07 PM »

"re-wetten".  ;D

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Pokerwork fettling
« Reply #49 on: April 18, 2012, 04:43:12 PM »

LOL - yeah  ;) Dictionary explanation "Re-Wetten" ree wet ten    desc:- to re tune a single Free reed in a pair which has drifted into unison with its partner in an instrument which has been overall tuned wide. See De-Wetten for the reverse

New Official description  ;D
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork fettling
« Reply #50 on: April 18, 2012, 05:40:25 PM »

Don't agree about the wax and valves being changed.   I'd put money on them being original.  If seen many of this model with original valves and wax that look exactly like this.  Plastic valves go back to the 60's or even 50s when these boxes were being made.  If they are originals the valves ay not be securely attached as the early plastic valves were attached with an adhesive which tends to loose its grip. Lift a valve and pull gently and it should stay in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Pokerwork fettling
« Reply #51 on: April 18, 2012, 07:34:29 PM »

If I recall correctly you can look at the "hidden" valves by lifting the pallets. You might need a small torch.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Pokerwork fettling
« Reply #52 on: April 18, 2012, 08:31:00 PM »

Thought the plastic valves might well be retro fitted  seeing that those on the bass are leather, not the "vileda" & plastic type. Unless they have been refixed the glueing looks a bit messier than factory finish but you could be right, maybe Heidi was having a bad day (:)
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Pokerwork fettling
« Reply #53 on: April 18, 2012, 09:28:34 PM »

Thought the plastic valves might well be retro fitted  seeing that those on the bass are leather, not the "vileda" & plastic type. Unless they have been refixed the glueing looks a bit messier than factory finish (:)

which would line up with Theo`s poor glue used posting, someone has re-glued some of the valves..... this would date the box in the 50s at the earliest then . They`re a great buy for the money they fetch, perfect for adding tuning keys you may use occasionally but don`t want to spring for a 2 Row pokerwork or Erica in and end up with a row idle
« Last Edit: April 18, 2012, 09:30:53 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Pokerwork fettling
« Reply #54 on: April 18, 2012, 11:29:47 PM »

The wax will be elderly and the valves may well be falling off (mine they fell off as soon as look at them). Bear in mind that *at some point* you will need to do a full overhaul.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal