Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: paper for bellows repair  (Read 6293 times)

0 Members and 1 Guest are viewing this topic.

henrikfan

  • Member
  • *
  • Offline Offline
  • Posts: 17
    • Elizabeth Brodie-home
paper for bellows repair
« on: September 27, 2008, 10:32:39 PM »

Have been following Tallship's progress on his Hohner refurbishment project, and am hoping that he (or or anyone else with an opinion on the subject) can give me some advice on what kind of paper to use for re-covering bellows. Are things like weight, sized or unsized, or texture a consideration when choosing paper for this part of refurbishment?. Also, are there any types of paper that should be avoided for this job?. 

Thanks in advance
Henrikfan
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: paper for bellows repair
« Reply #1 on: September 27, 2008, 11:05:48 PM »

Hello and welcome to the forum, I just happened to be on the board when you posted your question. Let me say first off that I am by no means an expert or even moderately experienced repairer, just a dabbling amateur. I chose what looked like a nice paper from a bookbinder's supply house and would think that the choice of paper should be lightweight so as not to add bulk to the bellows.

I used an embossed paper which wasn't the best idea in the world, a flat paper would be much more practical and easier to handle, I used ordinary wallpaper paste to attach the new papers. I also bought pieces of handmade Japanese paper but decided not to use it as it had a surface that looked not unlike blotting paper and I was worried that it would prove unsuitable because the old papers were quite badly stained.

There are lots of wonderful paper designs out there to chose from, have fun and let us know how you get on.

Pete. :)

p.s. Not much progress has been made on the Hohner of late for a variety of reasons - but I'm hoping to get it back on track shortly.

Edited to fix dead link.
« Last Edit: April 16, 2014, 05:38:02 PM by tallship »
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

henrikfan

  • Member
  • *
  • Offline Offline
  • Posts: 17
    • Elizabeth Brodie-home
Re: paper for bellows repair
« Reply #2 on: September 27, 2008, 11:51:53 PM »

Thanks for your post.  I also had considered using a handmade paper, but got caught up in a loop of expedience (i.e. 'I've got plenty of it and could get on with the job') versus 'is there a recommended paper with particular qualities'.  Am having to push myself to carry on with the task as I know that it's odds on that it will still need repairs beyond my capabilities (namely tuning).  Your project posts are much appreciated.

regards
Henrikfan
Logged

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: paper for bellows repair
« Reply #3 on: April 16, 2014, 02:22:54 PM »

I'm digging up this old thread from six years ago because it's at the top of the list when I search for 'bellows paper'. I'm a bit surprised at the lack of responses TBH. Maybe it's something that people prefer to avoid.

My first DIY Pokerwork bellows taping, last year on my own box, I managed very well without damaging the papers. However I have now inherited a much severer case, which had been crudely repaired (by someone else!) with lashings of horrible gooey tape, and several smashed corners.

The good news is that the corners have proven to be repairable and the sticky tape is now off.
The bad news is that at least half the bellows paper came with it, so I am now in the market for some fresh. I could get some fancy stuff from Charlie Marshal and take pot luck on the design but it would cost me £26.85 for enough for a Pokerwork! So what do other people do as an economical alternative, with the OP's comments in mind?

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: paper for bellows repair
« Reply #4 on: April 16, 2014, 03:11:38 PM »

For a bellows-making project, I used a fabric off-cut found in my wife's sewing room - no cost.  I chose a reasonably thin, close-weave and non-stretchy piece, and it worked very well.  Plus it's probably sturdier than paper...
Logged

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: paper for bellows repair
« Reply #5 on: April 16, 2014, 03:24:42 PM »

Hmm, interesting, never thought of that. What did you glue it on with so that the glue didn't blemish the cloth?

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: paper for bellows repair
« Reply #6 on: April 16, 2014, 04:31:07 PM »

I used brown parcel wrapping paper on my from-scratch bellows which is quite tough and has a faint stripe. Looks nice to me!
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: paper for bellows repair
« Reply #7 on: April 16, 2014, 05:49:01 PM »

I used white (PVA) glue applied thinly.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: paper for bellows repair
« Reply #8 on: April 16, 2014, 06:36:21 PM »

Brown parcel wrapping paper, ( it's called craft paper) is extremely good and comes in different weights.
The beauty of this stuff is that it is acid free, eg Ph 7 and won't rot. It is much more hard wearing than you would first think. Having used it to tape, a light rub over with real beeswax will make it impervious to most things.
PVA is an ideal glue to use. There are other threads here on glue types.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: paper for bellows repair
« Reply #9 on: April 18, 2014, 07:35:28 AM »

I have used Japanese paper to good effect. The stuff is really tough and attractive. https://www.flickr.com/search/?w=26639011@N06&q=japanese%20paper%20accordion
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: paper for bellows repair
« Reply #10 on: April 18, 2014, 11:17:10 AM »

That paper is really nice. Are those boxes that you've done?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: paper for bellows repair
« Reply #11 on: April 18, 2014, 04:11:13 PM »

Most of them are ones I had done for me by Weltmeister. I often design a accordion around a paper, and mail them the paper.
Sometimes I do a bellows for other accordions, if they happen to be the same size as something Weltmeister makes. They don't do custom size bellows.
 I have been to the factory a few times, and got the idea when I saw how the bellows were made.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: paper for bellows repair
« Reply #12 on: April 18, 2014, 04:54:50 PM »

Most of them are ones I had done for me by Weltmeister. I often design a accordion around a paper, and mail them the paper.
Sometimes I do a bellows for other accordions, if they happen to be the same size as something Weltmeister makes. They don't do custom size bellows.
 I have been to the factory a few times, and got the idea when I saw how the bellows were made.

Amazing stuff, Kimric....in furtherance (is that a real word?) of this idea, here's a link  to a paper supplier showing some beautiful patterns that I considered for a project. Don't know about the suitability for bellows papers, but the paper is inexpensive, and one could order some sheets without great expense for experimentation.
« Last Edit: April 18, 2014, 04:58:10 PM by forrest »
Logged

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: paper for bellows repair
« Reply #13 on: April 19, 2014, 06:28:05 PM »

Tried a bit of thin fabric, but it's still too thick, so now looking at paper again. I like the designs at http://store.falkiners.com/store/product/3185/Payhembury-S14/ but am also attracted to the Kraft wrapping paper idea.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: paper for bellows repair
« Reply #14 on: April 19, 2014, 06:41:56 PM »

Tried a bit of thin fabric, but it's still too thick, so now looking at paper again. I like the designs at http://store.falkiners.com/store/product/3185/Payhembury-S14/ but am also attracted to the Kraft wrapping paper idea.

Falkiner fine papers are in Holborn London UK .
Well worth a visit if you are up in the smoke.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: paper for bellows repair
« Reply #15 on: April 22, 2014, 05:23:12 PM »

Try to make sure the paper is acid balanced or archival, as this will reduce the possibility of it yellowing or becoming brittle.
 I have used some nice paper out of India, but avoid the textured stuff as it will be too thick.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: paper for bellows repair
« Reply #16 on: April 22, 2014, 09:27:02 PM »

Acid balanced? I'm not convinced that is a consideration over the probable 20 year absolute max lifetime of a set of DIY renovated bellows! If they rot in 40 years it won't be like losing a Dickens first edition.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: paper for bellows repair
« Reply #17 on: April 22, 2014, 10:16:58 PM »

Acid balanced? I'm not convinced that is a consideration over the probable 20 year absolute max lifetime of a set of DIY renovated bellows! If they rot in 40 years it won't be like losing a Dickens first edition.

A simple consideration that yields a better result. If someone is going to do something, he might as well do the best job possible, right?

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: paper for bellows repair
« Reply #18 on: April 24, 2014, 07:01:43 AM »

If the paper is very acid you won't even get ten weeks out of it let alone ten years.
A simple experiment to show this. Take a sheet of newspaper and cover part of it with something opaque leave it in the daylight for a few days then take a look. The rot has already started.  :'(
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: paper for bellows repair
« Reply #19 on: April 24, 2014, 07:05:51 AM »

Paper that is not acid balanced tends to become brittle, and may crack over time. Most decent paper will be, but say christmas or birthday wrapping paper will not be.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal