Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Klingenthal Antiques  (Read 5844 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Klingenthal Antiques
« on: April 19, 2012, 11:16:52 AM »

There are loads of 1 row antique German melodeons on E-Bay with all sorts of optimistic descriptions, as most here know, they`re from the Klingenthal district of Saxony and the cheapest of them were the equivalent of the lowest of the low chinese boxes of today . thesedays "German" is seen as a byword for quality but 100 years ago and older, these boxes were the worst of the junk and a century of abuse and botched repairs won`t have improved them . the last junk squeezers from this area I`ve seen are Scholer unified reed plate, brass reed concertinas of the 1970s, I don`t know exactly when the end was..

I thought it would be interesting and fun to have a thread dedicated to these "ornaments" and it may serve to stop people buying the worst ones thinking they`ll get a playable Box.  some are even more cunning than fakes of today and look superb. I bought such a box for a Tenner plus postage based on the If you`re going to buy a Klingenthal Ornament, may as well get one which looks the part theory .. so I`ll kick off with this one....

Cunning Fake Stops - only naming is "The Indestructible leather Bellow. Hercules Patent in Germany Nbre 81041. No holes for the bass sound to get out -reedplates made of steel, pewter or zinc, reeds are brass.

« Last Edit: April 19, 2012, 11:36:10 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Klingenthal Antiques
« Reply #1 on: April 19, 2012, 01:02:47 PM »

I think it was in Dave Jone's little book on the Border Morris where he describes how groups of workers during the winter dancing season (when work was more scarce in agricultural areas) would club together to buy a cheap melodeon for the tour. At the end of a season or two the instrument would be pretty much worn out and discarded ... possibly to someones attic as it seems they keep popping up.

So there was a real market.

I think someone once posted up a link to the manufacturing figures for accordions coming out of Germany in the early 20th Century and the numbers where huge, running into the millions.

I have a suspicion that the Chinese boxes now being sold by the likes of the Music Room or Hobgoblin are better quality than most of the old Klingenthal boxes. Incomes and expectations have changed along with machinery and manufacturing methods.

I think you're right about Ebay and some sellers ridiculous descriptions, though I wonder how many of these old, rusty and wrecked instruments really get sold to prospective players? For those with pictures, surely anyone with half an eye can see what a state these instruments are in after 60 years in a damp loft or cupboard.

But, maybe not ... there are the occasional questions about these old boxes on here, though I think the warning should also be widened to buying any old, unrestored instrument on Ebay. Just because "it's a Hohner" does not mean that it is in any state to be played or even repaired.
« Last Edit: April 19, 2012, 01:05:53 PM by Andrew Wigglesworth »
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Klingenthal Antiques
« Reply #2 on: April 19, 2012, 01:27:08 PM »

Thanks Andrew, there certainly doesn`t seem to be a shortage of the things, the fake Stops made me laugh, I`ve heard of that before in these boxes..
I got that one for an ornament which is fine for a tenner, as it happens the all-leather bellows are fine and it could easily be turned into a reed tuning block (replace the front end with a board for the purpose) , it`ll certainly never perform as a melodeon again, (it plays in a wheezy out of tune brass reed kind of manner) ..

I`ve got a very recent unbranded Chinese Anglo concertina (usually seen with the scarlatti badge) , plywood and celluloid, it sounds quite good in a 1 voice accordion kinda way and its loud enough for Morris (it has melodeon reeds & reedblocks rather than a reedpan with real 'tina reeds), the downer is the pallet/button action, the levers are unreliable and made of thin aluminium. that`s one instrument which won`t be around in 10 years let alone 100 in any shape or form .

Good point about the warnings extending to ALL old boxes, that 1040 I just got could have easily been a total dog and I was prepared for doing a lot more work than I have or need to do. others are less prepared
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Klingenthal Antiques
« Reply #3 on: April 19, 2012, 02:12:46 PM »

the fake Stops made me laugh

These instrumental embellishments were not limited to poor quality instruments. It is well known that Will Starr, the self titled 'King of the Scottish Accordionists', had an extra row of (mute) buttons added to his otherwise standard Hohner B/C/C# instrument in an attempt  to bamboozle  the unsuspecting masses.

Logged
Semper idem, sed non eodem modo

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Klingenthal Antiques
« Reply #4 on: April 19, 2012, 03:22:42 PM »

Not everything coming from Saxony was junk, although during the Cold War, the factories were consolidated and instruments from this region were genuinely terrible. I'd definitely stay away from those. But during the golden age there were some high quality accordions coming from Saxony, including one-rows on par with those of other more well known companies. Not everything, mind you, but some. There's an accordion museum in Zwota that I'd like to visit one day which showcases the best of what the region was producing. And for whatever it's worth, plenty of junk was pumped out of Trossingen, too.

Personally, I like the sound of brass reeds on a single plate in the old tuning. They don't perform nearly as well as tapered steel reeds on individual plates but they have a sound all their own, very oldie moldy and rather charming. For the price of tape, valves, gaskets, and your time, a salvageable junker from Klingenthal can be dolled up to a hobby machine with minimal effort. A member did a post on this a while back, the results were pretty encouraging.

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Klingenthal Antiques
« Reply #5 on: April 19, 2012, 05:23:02 PM »

Considering that harmonicas and accordions, as well as wind and string instruments, were being produced in Klingenthal long before Hohner started up, it seems sad that "Saxony" has become synonymous with poor quality.
As Christopher K. says, during the "golden age" there were some companies building good instruments - I have a pre-war Meinel & Herold, proudly displaying "Klingenthal Sa." alongside their name, that has as good, if not better, build quality than a Hohner equivalent.
Most of the critics ignore the fact that there were also many small concerns, little more than cottage industries, producing "pocket money" instruments the equivalent of todays Toy Melodeons. ( Problem is that some people believe the junk shop antique dealers description of these survivors and forget the old adage about making silk purses out of sow's ears.)
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Another Klingenbox
« Reply #6 on: May 06, 2012, 05:28:23 PM »

Here`s another Klingenbox . this time a Worldmaster and far from antique (70s?) , I don`t know if this is the same as the popular budget PA maker Weltmeister (the German for Worldmaster).

It`s got all the Saxonesque attributes - each end held on with just two front (and rear) mounted screws rather than the usual top/bottom pin setup - very deep bellows frames with fancy corners on - bass strap nailed on - Unified treble reed plates with Brass reeds and the bass reed plates setup as chords..

the treble end actually sounds good ! , far better than the wheezy Scholer concertinas of the same period though the bass end is weaker than the usual Steel reeded boxes - I`ve never heard a brass reeded box of any kind with decent bass, the highest notes seem better than steel reeds ..

The oddest thing (to me anyway) is the bass setup . it`s four button like a Hohner 1040 with C and G on the two left buttons but where the right two buttons are usually Unisoniric on F , this is A/A minor on the pull and the usual F/Fmajor on the Push ..

Not bad for what it is. I was hoping it was in G. it`s in C so will be selling it on after I`ve repalced the highest button (easy as its a stick on , the wood part of the button is still there and plays well.. not the best thing out there but a good cheap intro into melodeons which won`t put you off teh instrument -- I guess this is where the maker Pitched it

Pics - I`ve already replaced the grille cloths back and front and all the bass buttons are level now . note the similarity to the 100yr old one at the top of the thread in design inside


« Last Edit: May 06, 2012, 05:29:58 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Klingenthal Antiques
« Reply #7 on: May 06, 2012, 05:28:59 PM »

Pics of the Insides

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Klingenthal Antiques
« Reply #8 on: May 07, 2012, 02:34:50 AM »

You think they made that case thick enough?  ;D I'd say comrade Adam-T's red Worldmaster accordion should withstand the blast from most Cold War tactical ordinance. Reminds me of my old Sovtek 'Small Stone' phase shifter pedal, built like a tank, weighs about three pounds.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Klingenthal Antiques
« Reply #9 on: May 07, 2012, 07:25:58 AM »

LOL !!!!!!, far distant from the cardboard thin case of a pokerwork - I guess it needed to be thick so it could be held together and Seal reasonably well using just two long wood screws at each end.

what amazes me is the similarity between the early 1900s Zinc and brass plated box at the top and this 1970s ally and brass plated box regarding interior design. of course the old box has 100% leather bellows instead of being made of thin cardboard and bogpaper and the valves are felt rather than acetate but the mechanics are the same .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Klingenthal Antiques
« Reply #10 on: May 07, 2012, 07:50:46 AM »

LOL !!!!!!, far distant from the cardboard thin case of a pokerwork - I guess it needed to be thick so it could be held together and Seal reasonably well using just two long wood screws at each end.

what amazes me is the similarity between the early 1900s Zinc and brass plated box at the top and this 1970s ally and brass plated box regarding interior design. of course the old box has 100% leather bellows instead of being made of thin cardboard and bogpaper and the valves are felt rather than acetate but the mechanics are the same .

The screws are an interesting point. In theory, I figure it's a better method of bellows attachment, or could be a better method, but I've never tested one against the other to know for sure. Koch for a time used the transverse screws, later they used eight big, steampunky metal fittings on the outside of the cabinet to hold the bellows to the case. Either way, such screws provide constant pressure in the plane of bellows compression so they might provide a better seal than four small pins at right angles to the plane. On the other hand, correctly sized bellows pins do an adequate job without leaking and are less expensive than screws or fittings.

I think the box might be a little earlier than the 1970s, but that's speculation on my part. The single plate is a little strange considering how much extra metal is wasted. The whole things strikes me as a compromise, an attempt to roll out something with whatever materials and facilities were available.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Klingenthal Antiques
« Reply #11 on: May 07, 2012, 08:38:58 AM »

The screws are an interesting point. In theory, I figure it's a better method of bellows attachment, or could be a better method


Yep, it could, IF 6 or so screws were used, 2 isn`t enough really, this box leaked until I packed the holes with more wood for the screws to get a better grip (all the squeezing on two woodscrews) . also using screws like this relies on thick blocks of wood for them to screw into (or thick casework in the case of the Klingenthals), I feel that the popular slide on and pin method is more efficient

Quote
Koch for a time used the transverse screws, later they used eight big, steampunky metal fittings on the outside of the cabinet to hold the bellows to the case.

I guess designs cross borders hence the Klingenthalesque Steampunk design corners and screw fitting coming out of trossingen - the Saxony boxes kept the design, that 1900s box I posted at the top is a typical example, this relatively recent one has them too in a more subdued style.

Quote
Either way, such screws provide constant pressure in the plane of bellows compression so they might provide a better seal than four small pins at right angles to the plane. On the other hand, correctly sized bellows pins do an adequate job without leaking and are less expensive than screws or fittings.

All I can add is that the pin method is still used in the most expensive of boxes (big Pigini and Excelsior PAs) and as far as I know, the screw method even fizzled out in Saxony (the latest Pokerworkalikes use pins) , Klingen-Tinas used two screws too, even the chinese 'tinas use Six ! .

Quote
I think the box might be a little earlier than the 1970s, but that's speculation on my part. The single plate is a little strange considering how much extra metal is wasted. The whole things strikes me as a compromise, an attempt to roll out something with whatever materials and facilities were available.

I was just guessing based on the design & build of the reed plates & fixing method, the acetate valves (I know Hohner used them in the 50s but didn`t think they did in Saxony) etc compared to my Scholer concertina which was definately 1970s. but as we`ve seen, not a lot changed in the C20th for these makers, that antique one could have had the same wax and pins too when it was made .

all intertesting stuff
« Last Edit: May 07, 2012, 08:53:06 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal