Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Table Saw  (Read 14752 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Table Saw
« on: April 20, 2012, 08:05:02 PM »

I think my next workshop purchase needs to be a smallish table saw. Only need to be able to cut melodeon shaped bits of wood so 20-25mm cut (see I can do foreign money  ;) ) Anyone got any recommendations?

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Table Saw
« Reply #1 on: April 20, 2012, 09:18:03 PM »

Yes mind your fingers! AtB mory
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Table Saw
« Reply #2 on: April 20, 2012, 09:21:58 PM »

Yes mind your fingers! AtB mory

 ;D

Ray H

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: Table Saw
« Reply #3 on: April 20, 2012, 09:35:10 PM »

Based on my experience in my workshop using a cheapo Chinese saw It does a decent job if I make sure the rip fence can't flex (I do this by clamping a piece of wood to the table behind it). The saw does make an awful din though. My uncle uses a decent quality small band saw and that is far more versatile (we both do model making etc). Although considerably more expensive to buy, I would recommend that route.
Logged

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Table Saw
« Reply #4 on: April 20, 2012, 11:52:37 PM »

Sounds to me that a bandsaw is the way to go a lot safer if you've no tablesaw experience.

Scheppach Basato 1 Bandsaw is a pretty good make but at around £170 may be more than you're prepared to pay - cheaper makes available £110 ish but no idea what they're like.

(I'm a carpenter/ joiner)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Table Saw
« Reply #5 on: April 21, 2012, 12:27:31 AM »

The small table saws made by Proxxon and available from Axminster Tools are excellent.  Very neat, quiet running and accurate.  Not cheap for a small saw but I find mine very useful for melodeon sized cutting.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Table Saw
« Reply #6 on: April 21, 2012, 07:54:51 AM »

Second Theo's suggestion.  The cheap chinese saws that you see in places like B&Q are like chinese boxes, need a lot of fettling to make them run right.  Usually a new, finer blade plus a lot of shims round the riving knife etc which takes time and chews up a lot of wood.

For what you're describing a Proxxon or similar would be fine and not take up too much room (I cut down 5x5 sheets and need fourteen foot of clear space!)

I would not buy a bandsaw, unless you spend a fortune on really good blades you'll find that they have a tendancy to lead )one side of the blade being sharper than the other it cuts faster) and so the line goes crooked, at this point you tighten the blade and "snap" (been there).

You get what you pay for, like boxes, there's good and there's cheap, very rairly do the two meet.

Steve
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Table Saw
« Reply #7 on: April 21, 2012, 08:17:38 AM »

Thanks Guys. The Proxxon looked a good saw if a bit expensive but with advice here they look to be good value for my money. The suggestion of a band saw was also interesting but it would not do the things I foresee needing to do after watching the table saw maestro Emmanuel Pariselle.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Table Saw
« Reply #8 on: April 21, 2012, 09:04:07 AM »

I`d personaly get a Bandsaw, they`re so flexible in what you can do with them, basically anything from making case parts to fine fretwork for a wooden grille . make sure the table has good guides
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Table Saw
« Reply #9 on: April 21, 2012, 09:25:24 AM »

I`d personaly get a Bandsaw, they`re so flexible in what you can do with them, basically anything from making case parts to fine fretwork for a wooden grille . make sure the table has good guides

Not sure a band saw could do the sort of job I am aiming at. A good example is he work Theo did with one in this set of photos

https://www.facebook.com/media/set/?set=a.50177028166.61330.709188166&type=3

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Table Saw
« Reply #10 on: April 21, 2012, 09:29:25 AM »

I`d personaly get a Bandsaw, they`re so flexible in what you can do with them, basically anything from making case parts to fine fretwork for a wooden grille .

Fretwork on a bandsaw??  how on earth do you do that?   Do you have bandsaw blades that can be split to thread through holes?

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Table Saw
« Reply #11 on: April 21, 2012, 09:29:36 AM »

Thanks Guys. The Proxxon looked a good saw if a bit expensive but with advice here they look to be good value for my money. The suggestion of a band saw was also interesting but it would not do the things I foresee needing to do after watching the table saw maestro Emmanuel Pariselle.

Is is this one?

http://www.proxxon-direct.com/acatalog/Bench_circular_saw_KS_230.html
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Table Saw
« Reply #12 on: April 21, 2012, 09:39:50 AM »

Quote
Fretwork on a bandsaw??  how on earth do you do that?   Do you have bandsaw blades that can be split to thread through holes?

Sorry, I was half asleep ;-)  - I`ve done fretwork on bandsaws but not which didn`t have a path for the blade to come out. I also had an idea that Lester was about to embark on making his first box
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Table Saw
« Reply #13 on: April 21, 2012, 09:40:53 AM »

Thanks Guys. The Proxxon looked a good saw if a bit expensive but with advice here they look to be good value for my money. The suggestion of a band saw was also interesting but it would not do the things I foresee needing to do after watching the table saw maestro Emmanuel Pariselle.

Is is this one?

http://www.proxxon-direct.com/acatalog/Bench_circular_saw_KS_230.html

More likely this one, handles thicker stock

http://www.proxxon-direct.com/acatalog/Table_saw_FKS_E.html

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Table Saw
« Reply #14 on: April 21, 2012, 09:43:07 AM »

Quote
Fretwork on a bandsaw??  how on earth do you do that?   Do you have bandsaw blades that can be split to thread through holes?

Sorry, I was half asleep ;-)  - I`ve done fretwork on bandsaws but not which didn`t have a path for the blade to come out. I also had an idea that Lester was about to embark on making his first box

Made two already on Emmanuel's courses where he uses a table saw for all sorts of tasks. Next on my list, after the table saw, is a router, then making a box is a possibility  :o

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Table Saw
« Reply #15 on: April 21, 2012, 09:50:43 AM »

More likely this one, handles thicker stock

http://www.proxxon-direct.com/acatalog/Table_saw_FKS_E.html

I have one of those, which my recommendation is based on.   But this one is a newer version, same cutting capacity, but a much better fence and slightly larger table, and cheaper!   http://www.proxxon-direct.com/acatalog/Table_Saw_FET.html 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Table Saw
« Reply #16 on: April 21, 2012, 11:29:25 AM »

More likely this one, handles thicker stock

http://www.proxxon-direct.com/acatalog/Table_saw_FKS_E.html

I have one of those, which my recommendation is based on.   But this one is a newer version, same cutting capacity, but a much better fence and slightly larger table, and cheaper!   http://www.proxxon-direct.com/acatalog/Table_Saw_FET.html 

I have just got one of these at work for cutting small samples of wood and composites for testing and it has proved to be very good but we have not used it enough to know how durable it will be. We also got the Dado kit see which you may find very helpfull for melodeon making. Changing the blade is quite fiddly, the dust extraction hole could do with being larger (we may modify this when it is out of warranty) and you would struggle to cut down thicker sections to make the 7 or 8mm thick boards for melodeon construction.  I have also made a sled this type of thing which makes jigging and cutting of large numbers of small parts safer and more repeatable.
Logged
aka malodeon

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Table Saw
« Reply #17 on: April 21, 2012, 11:53:39 AM »


The woodwork in a melodeon is pretty varied and there is no one saw to saw it all.

A Proxxon is very good for small accurate stuff within it's capacity as Theo says - pretty ideal for cutting small strips for say wooden levers or fabricating reed blocks.  I have an FKS-E.
   It won't touch bigger timber though so unless your wood is already sized small enough for the Proxxon to handle you will have  a problem.

Next up from that are small table top saw benches.  Lots of cheap and nasty ones around though which WILL prove frustrating and inaccurate!   Makita and Bosch both make decent ones. One of these would be very versatile and allow you (with care and suitable jigs) to cut mitres, slots, grooves etc as well as handle larger timber. Good quality blades (and you will need different ones for best results crosscutting and ripping) are expensive but a must for a good finish and accurate cutting.  Probably the most versatile single tool to get if you can only buy one.

Bandsaw . . . a good band saw is not a cheap tool.  Cheap bandsaws are in my experience immensely frustrating to set up, and  with the best will in the world tend not to be accurate.  Apart from cutting curves in the ends of the keyboard (which can be done by hand) I can't think of  much in a melodeon which couldn't be better be done by some other means.
I'm not totally down on bandsaws - I have a Startrite which with the approriate blade will cut accurate veneers off big baulks at one end of the scale or  tight curves in than materials at the other.  It just wouldn't be my first choice for a saw for most bits of melodeon.

For cutting grilles and the like a used Hegner fret saw from ebay is perfect, and far preferable to a new chinese one.

Router - possibly most useful when upside down in a router table.
But, a milling machine too can be very (arguably more) useful and versatile for wood machining for a whole host of different jobs from slots, grooves, shaping, holes and so on with repeatably accurate spacing and measuring.

It's much like MAD really, one tool tends to lead to another   ;D
My excuse is that I use them to earn what passes for a living.

Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Table Saw
« Reply #18 on: April 21, 2012, 12:18:09 PM »

I've got an older version of the cheap Proxxon - and I absolutely could not do without it. Anything from small blocks for filling too big reed chambers to to making reedblocks, it does the trick.

If I were to get a new one, I'd def. go for the one that allows the blade to be angled. The cheapo one I have will only cut with the blade up straight.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Table Saw
« Reply #19 on: April 21, 2012, 04:41:24 PM »


I have one of those, which my recommendation is based on.   But this one is a newer version, same cutting capacity, but a much better fence and slightly larger table, and cheaper!   http://www.proxxon-direct.com/acatalog/Table_Saw_FET.html 

Wow, what a great little tool. I had to part with a long line of power tools :'( after my move to smaller home, tablesaw, jointer, lathe, belt sander, etc. Have not seen anything as tidy as this little saw outfit here in the US, most "small" table saws start at 10" blade. My old tools were large heavy cast iron jobs, made to endure decades of use. I did retain my drill press, though, an incredibly useful tool in any workshop situation....
Logged
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal