Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: PA System Advice  (Read 2346 times)

0 Members and 1 Guest are viewing this topic.

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
PA System Advice
« on: April 29, 2012, 07:09:47 PM »

We are thinking of changing our bands pa system for a smaller set up. Getting fed up with loading and unloading heavy amp racks and umpteen speaker cabs in and out of our cars.

Has anyone had any experience of HK Lucas pa systems, http://www.dv247.com/pa-systems-and-live-sound/hk-audio-lucas-performer-complete-pa-system--63632 they seem to be the perfect answer, with the active sub powering the satellite speakers.

The lineup of the band consists of melodeon/concertina, fiddle, electric guitar, bass guitar/electric double bass and drums, the drums being miked up for larger venues and we have a fairly 'rocky' sort of sound.
The set up we are looking at is around 1000w which is less than our current system but would probably be more efficient. The gigs where we need the most power would probably be large marquees. The only things that concern me a little is the small size of the satellite drivers (8").

Any advice much appreciated.

Martyn
« Last Edit: April 29, 2012, 09:00:43 PM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: PA System Advice
« Reply #1 on: April 29, 2012, 08:47:41 PM »

I have absolutely no experience of this particular product, but HK is reasonably common here in Cyprus, and I have to say I've not been impressed by the quality of what I've seen.  Most of their stuff seems to be built down to a price - a pair of their speaker stands lasted 2 gigs as the alloy was so soft the locking bolts distorted it to the point of uselessness - and the sound quality of the systems I've heard here is not great; not a patch on my ancient EV/Crown/Soundcraft  setup.  I may be doing them a disservice, but I personally wouldn't use their gear on the evidence I have here.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: PA System Advice
« Reply #2 on: April 29, 2012, 08:57:48 PM »

I've used a pair of Mackie SRM450 for about ten years now,  great sound for acoustic instruments, and they have been 100% reliable.   They also have built in amps, and have moulded cases which look more durable than the HK.  The new model SRM450 which came out recently is a little different in design, I don't know how they compare.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: PA System Advice
« Reply #3 on: April 29, 2012, 09:00:17 PM »

We are thinking of changing our bands pa system for a smaller set up. Getting fed up with loading and unloading heavy amp racks and umpteen speaker cabs in and out of our cars.

Has anyone had any experience of HK Lucas pa systems, http://www.dv247.com/pa-systems-and-live-sound/hk-audio-lucas-performer-complete-pa-system--63632 they seem to be the perfect answer, with the active sub powering the satellite speakers.

The lineup of the band consists of melodeon/concertina, fiddle, electric guitar, bass guitar/electric double bass and drums, the drums being miked up for larger venues and we have a fairly 'rocky' sort of sound.
The set up we are looking at is around 1000w which is a lot less than our current system but would probably be more efficient. The gigs where we need the most power would probably be large marquees. The only things that concern me a little is the small size of the satellite drivers (8").

Any advice much appreciated.

Martyn

If you're putting bass and drums through it and want a "rocky" sound I'm not convinced you'd have enough headroom with this setup, especially in marquees. There's nothing magic about the efficiency of the HK systems compared to any other decent systems, they're small light and a complete system but not that loud. If you want loud as well you'll need more power and more/bigger drivers in the satellites, this doesn't necessarily mean big and heavy but it does mean expensive :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: PA System Advice
« Reply #4 on: April 29, 2012, 09:01:50 PM »

I've used a pair of Mackie SRM450 for about ten years now,  great sound for acoustic instruments, and they have been 100% reliable.   They also have built in amps, and have moulded cases which look more durable than the HK.  The new model SRM450 which came out recently is a little different in design, I don't know how they compare.
We've used SRM450s, they're fine for acoustic stuff but really need subs for bass and drums. This would be cheaper than the HK system and more appropriate:

http://www.dv247.com/pa-systems-and-live-sound/mackie-srm450v2-and-srm1801-bundle--78815
« Last Edit: April 29, 2012, 09:06:12 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Ken Watson

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: PA System Advice
« Reply #5 on: April 29, 2012, 09:41:57 PM »

Has anyone had any experience of HK Lucas pa systems?

Hi Martyn,
Gareth Kiddier has an HK System... you could try talking to him for advice.
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: PA System Advice
« Reply #6 on: April 29, 2012, 09:52:25 PM »

Strange how times change.  Thirty odd years ago the band I was in played large clubs (300+ capacity) with guitars and bass going out from the backline, unamplified drums except for really big venues where we used an overhead mike and a 100watt pa for vocals and acoustic instruments.  Even then we got complaints that we were too loud.

Steve
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: PA System Advice
« Reply #7 on: April 30, 2012, 08:26:16 AM »

Strange how times change.  Thirty odd years ago the band I was in played large clubs (300+ capacity) with guitars and bass going out from the backline, unamplified drums except for really big venues where we used an overhead mike and a 100watt pa for vocals and acoustic instruments.  Even then we got complaints that we were too loud.
that'd be my inclination too.
But if you're instead putting the whole works through a PA then there's one vital additional component you need - someone reliable out front on the desk.

Agreed that this helps a lot, *if* you've got said someone reliable (Sam Skey was brilliant for us with The Committee Band) -- but nothing to do with whether everything goes through the PA or not.

Even if you're mixing from the stage (like I do now with Panjandrum) it's far easier if everything goes through the PA, rather than having loud backlines over which you've got no control. If you're mixing from on stage or out front the worst problems are bass and guitar players who have loud rigs behind them, which they turn up even further because their ears aren't in their backsides (though you wouldn't always know this) -- and this can make it impossible to get a good sound in the hall.

But if you want to avoid this (quiet or no amps on stage) everyone really needs their own monitor mix (and monitor, obviously) which many desks can't provide.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA System Advice
« Reply #8 on: April 30, 2012, 10:04:44 AM »

My first thought, Martyn, was that 1000W should certainly cover you for virtually any gig except the very large where one would expect a sound system to be provided.  However I think I would also be slightly concerned about the mid to mid/low range with the small 8" satellites, without trying it out fully.  Perhaps you might also want to use the PA for small 'acoustic club' settings with no bass or drums, where you'd probably not want to still have to bring along the sub-woofer to cover mid/low ranges fully?

Regarding Ian's good points re backlines, I think there are different philosophies for this depending on a lot of things, and it does of course depend on the bass player.  I've not regularly played in a folk band situation where drum amplification was necessary, that would have to be a pretty big gig, but our bass player has a radio transmitter just so that he can advise me at the mixer on FoH mix.  He has a backline amp which we don't usually put through the mixer, we find it best to locate it by his side rather than at the back, the exact positioning depending on the venue and how much the other band members need.  Separate on-stage monitor mixes are great for big venues, but for the normal gig I think they're going to mean even more equipment and probably a separate engineer, and I'm now tending more towards the philosophy of closely-spaced band members who are listening to and communicating with each other, because that has other benefits which even a skilled sound engineer can't replicate.

Speaking now as a bass player in a different band who regularly goes to 'acoustic' clubs with PA, I sometimes take my own smallish backline amp for personal monitoring purposes, sometimes not.  I often take it just in case and then leave it in the car.  That decision depends on how much I know of the system and the engineer.  You can often trust the engineer that the FoH sound is OK when the monitors are obviously not man enough for the job of reproducing a bass sound, but if a weedy onstage sound is putting you or the others off, you have to bring in the personal amp.  But if I am using the amp, the crucial thing is to keep checking that my level is right FoH, by regularly checking with the engineer out front, who will want to tell me immediately if things are not right.  Bass sound is a very tricky thing to deal with, because you tend to get unpredictable localised spots of high and low volume, and IMO a bass player needs to trust the ears of the engineer (or his own ears if he has a radio transmitter and can walk out front), and adjust his playing to that.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: PA System Advice
« Reply #9 on: April 30, 2012, 02:05:19 PM »

My first thought, Martyn, was that 1000W should certainly cover you for virtually any gig except the very large where one would expect a sound system to be provided.  However I think I would also be slightly concerned about the mid to mid/low range with the small 8" satellites, without trying it out fully.  Perhaps you might also want to use the PA for small 'acoustic club' settings with no bass or drums, where you'd probably not want to still have to bring along the sub-woofer to cover mid/low ranges fully?

Regarding Ian's good points re backlines, I think there are different philosophies for this depending on a lot of things, and it does of course depend on the bass player.  I've not regularly played in a folk band situation where drum amplification was necessary, that would have to be a pretty big gig, but our bass player has a radio transmitter just so that he can advise me at the mixer on FoH mix.  He has a backline amp which we don't usually put through the mixer, we find it best to locate it by his side rather than at the back, the exact positioning depending on the venue and how much the other band members need.  Separate on-stage monitor mixes are great for big venues, but for the normal gig I think they're going to mean even more equipment and probably a separate engineer, and I'm now tending more towards the philosophy of closely-spaced band members who are listening to and communicating with each other, because that has other benefits which even a skilled sound engineer can't replicate.

Speaking now as a bass player in a different band who regularly goes to 'acoustic' clubs with PA, I sometimes take my own smallish backline amp for personal monitoring purposes, sometimes not.  I often take it just in case and then leave it in the car.  That decision depends on how much I know of the system and the engineer.  You can often trust the engineer that the FoH sound is OK when the monitors are obviously not man enough for the job of reproducing a bass sound, but if a weedy onstage sound is putting you or the others off, you have to bring in the personal amp.  But if I am using the amp, the crucial thing is to keep checking that my level is right FoH, by regularly checking with the engineer out front, who will want to tell me immediately if things are not right.  Bass sound is a very tricky thing to deal with, because you tend to get unpredictable localised spots of high and low volume, and IMO a bass player needs to trust the ears of the engineer (or his own ears if he has a radio transmitter and can walk out front), and adjust his playing to that.

Nothing wrong with on-stage backline as long as it isn't -- by which I mean the best place for on-stage amps is in front of (or alongside) the player, pointing at their ears. I've used both a small high-quality bass amp (Phil Jones Flightcase) which has upward-facing drivers and monitors with reasonable bass response (Mackie SRM450) with no problems -- I also now use a radio so I can walk out into the hall to hear the sound.

But I've mixed for bands with hefty backline amps where it's been impossible to get decent bass (or guitar) sound in the hall, even with no bass (or guitar) in the FOH PA there was too much muddy sound from on-stage, and you get problems with cancellation between backline and FOH. It might be OK at a big festival with a huge FOH PA which drowns the bleed from on-stage, but there aren't many festivals (or halls) that big and loud -- and just because it's OK for the band on-stage doesn't mean it's OK out front, trust me...

If you're using your own PA and it either doesn't get used by other bands or you note the settings, there's no reason that multiple monitor mixes make for much more work once you've set them up properly the first time -- we have 4 and they hardly get touched from gig to gig. But a couple of them are via amps which have separate volume controls for "me" and "foldback" to allow the musician to at least adjust their own level. In this case you can have fewer monitor mixes, though different people stil often want different balance in their foldback. If you all swap instruments like we do then this gets even messier :-(

In the end the best solution is whatever keeps the players happy while keeping the on-stage volume down, and multiple smaller monitors with separate mixes placed closer to the player (and their ears) help a lot with this.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA System Advice
« Reply #10 on: April 30, 2012, 03:08:00 PM »

Ian, I think I'd agree with pretty much everything you say there.

I think I didn't really explain my context properly, though - Martyn was trying to cut down on equipment, a laudable aim (and I speak as someone who has to have the biggest people carrier available, simply to lug it all around!)  I think it's a possible compromise to cut down on equipment for all but the biggest gigs by using a single bass amp as combined FoH and monitor, and that was really what I was saying.  I'm not sure that Martyn's 8" satellites would carry the rest of the sound on their own, which he is also worried about, and I think I might try to get bigger main speakers than that, so that they give full range on the other instruments.

These are compromise issues - some are OK, some not so good, but I agree that there is a lot of personal preference in all of this.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal