Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Microphones- built in wiring diagram-  (Read 1833 times)

0 Members and 1 Guest are viewing this topic.

melodeanman

  • Member
  • *
  • Offline Offline
  • Posts: 24
Microphones- built in wiring diagram-
« on: April 30, 2012, 10:01:09 AM »

I want to mic 3 different boxes for stage work, I will be singing at the same time. At the last two gigs I played I had lots of feed back and booming [from the speakers not the audience]. The sound man was using 3 standard voice mics on stands.
I have looked at the  Musitech MT 04N built in mics [used by Castaganari] but the cost for 3 boxes will be beyond my budget.
It would appear the basic components are inexpensive to build your own on board mic system. Has anyone here made their own built in  mics and if so do you have a wiring diagram I could have?
I have looked at other postings on this site but no definitive answers.   
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones- built in wiring diagram-
« Reply #1 on: April 30, 2012, 11:07:04 AM »

You'll probably know my views from the other threads, but my immediate thought was that what you describe would be for me an ideal situation for using two free-standing highly directional microphones, rather than standard voice mics, unless of course you want to move around a lot on stage.  Your sound man's problem was probably due to the off-axis response of the mikes being too high at certain frequencies - check their polar diagrams for different frequencies.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones- built in wiring diagram-
« Reply #2 on: April 30, 2012, 01:08:49 PM »

You'll probably know my views from the other threads, but my immediate thought was that what you describe would be for me an ideal situation for using two free-standing highly directional microphones, rather than standard voice mics, unless of course you want to move around a lot on stage.  Your sound man's problem was probably due to the off-axis response of the mikes being too high at certain frequencies - check their polar diagrams for different frequencies.
I agree that using a hypercardioid mic on the treble end (about a foot away) is the best solution, but I'd say a good clip-on mic is better for the bass end since it moves around a lot more.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones- built in wiring diagram-
« Reply #3 on: April 30, 2012, 03:29:55 PM »

Quote
but I'd say a good clip-on mic is better for the bass end since it moves around a lot more.

I've just tried an experiment by cranking up the bass end as high as it will go without feedback, with a free-standing Samson Q1 mic set about 20cm away from the LH end pointing at it, and directly away from the loudspeaker, 1.5m away.  It really does cover the usable bellows range for all but the most extreme extension, and even for the extreme, the player could probably move the RH end over to the right to keep the LH end in the range, without going so far as to cause RH side attenuation problems.  It is really loud for the player, but without feedback, except that at the very highest volume you can get a little high treble reflected off the box.

These were cracking good mics, surely there must be some like them still available?
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones- built in wiring diagram-
« Reply #4 on: April 30, 2012, 10:27:41 PM »

Quote
but I'd say a good clip-on mic is better for the bass end since it moves around a lot more.

I've just tried an experiment by cranking up the bass end as high as it will go without feedback, with a free-standing Samson Q1 mic set about 20cm away from the LH end pointing at it, and directly away from the loudspeaker, 1.5m away.  It really does cover the usable bellows range for all but the most extreme extension, and even for the extreme, the player could probably move the RH end over to the right to keep the LH end in the range, without going so far as to cause RH side attenuation problems.  It is really loud for the player, but without feedback, except that at the very highest volume you can get a little high treble reflected off the box.

These were cracking good mics, surely there must be some like them still available?
I guess it all depends how much you move the bass end around as you play; I move a lot so a stand mic doesn't work very well for me. It also depends how much bass end you like in the foldback, I like quite a lot. And with my sound man hat on, it's definitely easier to get consistent bass end sound without feedback with a clip-on mic.

But if a stand mic works for you, that's fine :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Microphones- built in wiring diagram-
« Reply #5 on: May 01, 2012, 06:19:59 AM »

This thread may be what you were looking for if you want to do it yourself: http://forum.melodeon.net/index.php/topic,617.msg4766.html#msg4766. I think there is a link to a wiring diagram.
Logged
Bill of Old Radipole Village

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Microphones- built in wiring diagram-
« Reply #6 on: May 03, 2012, 08:38:48 AM »

I have two realistic/tandy lapel mics that I've just taken out of an accordion complete with their power supplies.  The connectors have been removed, but that would not be an obstacle to anyone wanting to build an internal mic system.  Available for the cost of posting.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeanman

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Microphones- built in wiring diagram-
« Reply #7 on: May 03, 2012, 01:51:31 PM »

Theo I have sent you a PM.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal