Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: PZM for the bass end - how does it work?  (Read 6999 times)

0 Members and 1 Guest are viewing this topic.

Paul Young

  • Good talker
  • **
  • Offline Offline
  • Posts: 72
    • paulyoungfolk.co.uk
PZM for the bass end - how does it work?
« on: October 03, 2008, 10:25:43 AM »

Hello,

I'm looking to upgrade my melodeon mics and from what I've read it seems like a PZM is a good option for the bass end. I know where I can get one, but I'm a little confused about what I need to do with it when I get it. I was wondering if any of you who use them could provide instructions for installing it and using it, or let me know where there are some already (I read a post by Andy Cutting in which he described what he does with his, which I think was on the old melodeon forum, but it seems to have disappeared now).

I've read that some people mount them on the inside and some people mount them on the outside, facing in through one of the holes. It seems like a bit of rewiring needs doing, since the mic comes with the cable and preamp attached to it, and also I've heard mention of changing jacks for XLRs and such. I don't have the tools or know-how to do this personally, but I have a friend who does.

So really I'd just be very grateful if anybody using a PZM could tell me exactly what it is they do with it.

Thanks in advance!

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: PZM for the bass end - how does it work?
« Reply #1 on: October 03, 2008, 10:31:00 AM »

I need the same guidance.  I have a stripped down PZM waiting to be mounted on the bass end of my Max.  If I put it on the outside (easier, but messy) the lead can simply be put into the stage box with an adapter.  The balanced input at the desk will take any pick up out from the intermediate cable.  But I wonder, is there enough room inside the box for the mic to be effective?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: PZM for the bass end - how does it work?
« Reply #2 on: October 03, 2008, 10:37:34 AM »

I have seen them mounted on the outside, but not pointing through a hole.  The idea of the 'pressure zone' mic is that it is mounted a short distance from a flat surface, it then detects reflected sounds from within the so called pressure zone between the mic capsule and the flat surface.  That is the theory anyway, I've not used one myself, yet, but if its mounted differently there could be a dramatic effect on it's performance.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: PZM for the bass end - how does it work?
« Reply #3 on: October 03, 2008, 01:58:31 PM »

Hello,

So really I'd just be very grateful if anybody using a PZM could tell me exactly what it is they do with it.

Thanks in advance!

Oddly, I just asked *exactly* the same question in the Instrument Construction/Repair forum a couple  of days ago! Here's the thread...

http://forum.melodeon.net/index.php/topic,936.0.html

In this thread, you'll find a very helpful pic of one of Andy Cutting's boxes which shows where the mic goes - in this case, on the outside pointing in through one of the sound holes. I'm going to try this myself at the weekend - I'm planning to use velcro/masking tape for a temporary mount - I've no wish to start drilling holes.

My Tandy (actually a Realistic) PZM has a battery box/switch and a standard jack plug on the end but no preamp. What PZM do you have? I'll plug mine into a DI box to get a balanced signal, and then just run a mic lead from the DI box to the desk - so there's no need to resolder any plugs.

Regards,
Clive

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: PZM for the bass end - how does it work?
« Reply #4 on: October 03, 2008, 03:51:31 PM »

If you use it like that, it ceases to be a Pressure Zome Microphone and simply becomes an omnidirectional electret with a lump of metal on the end.

Incidentally, the feed out of the Realistics is already balanced, but the cold and screen are paralleled at the jack.  Simply remove the jack plug and solder on a standard male canon.  I=screen, 2=hot (red) 3=cold (white).

There is also a mod on the net which allows phantom power - never fancied that one.
Logged

Paul Young

  • Good talker
  • **
  • Offline Offline
  • Posts: 72
    • paulyoungfolk.co.uk
Re: PZM for the bass end - how does it work?
« Reply #5 on: October 03, 2008, 04:26:00 PM »

Thanks for these comments. In response:

Clive: sorry, please ignore my misuse of the word 'preamp' - i just meant the box with the battery in. It's also a Tandy/Realistic. And thanks - I'd actually found the exact same picture of Mr Cutting, after going through all the ones offered by Google images to find one that clearly showed the PZM. And yes, I like the idea of the temporary mount and just plug into a DI box - keeps things simple. However...

Theo and 'Falseknight': it had occured to me that if the mic was pointing through a hole then it ceases to work as a PZM. But, as far as I understood, in normal use doesn't the mic point down towards the plate, away from the sound? So the alternative to it pointing through a hole from the outside would be to mount it inside (not over a hole) facing down onto the bass grill (away from the reeds)? Surely if it was mounted on the outside and not facing through a hole then it would just pick up sound from outside the melodeon rather than from inside? Please correct me if I'm completely wrong about any of that.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: PZM for the bass end - how does it work?
« Reply #6 on: October 19, 2008, 07:57:17 PM »

The way I fitted mine was to take the mic part off the base plate and screw it inside the bass end.  I placed it facing the reeds, on the wooden plate where the levers are fixed  - no scientific reason for that, it just seemed the obvious place to put it. 

I cut off the lead, leaving just a few inches, which I soldered to a 1/4" open mono jack socket, which fits neatly into one of the air-holes so I didn't have to drill the instrument.  An in-line closed jack socket is soldered to the cut end of the lead running out of the battery box. 

For playing, I use a standard jack-to-jack instrument cable with a right-angled plug - one end plugs into the instrument, the other into the battery box socket, which has a jack plug on the other end leading to the desk or a DI.

It seems to work well.  Once fitted, it's a neat solution, all you have to do is plug in a lead.

I think you are mistaken in saying that in normal use a PZM points "away from the sound".  The way a PZM works is that sound from all directions is reflected off the plate into the mic.  It doesn't matter which way the mic is pointing, in fact the whole point of them is that they can pick up a natural sound from all directions, without the echo you would get from a conventional mic.  The bigger the plate the better, which is why they are often fixed to a wall or placed on the floor/stage.  Fitted internally, without the metal plate, the body of the melodeon acts as the plate, although with the sound source being so close I doubt it makes a difference

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: PZM for the bass end - how does it work?
« Reply #7 on: October 19, 2008, 08:10:12 PM »

The way I fitted mine was to take the mic part off the base plate and screw it inside the bass end.  I placed it facing the reeds, on the wooden plate where the levers are fixed  - no scientific reason for that, it just seemed the obvious place to put it. 

I think you are mistaken in saying that in normal use a PZM points "away from the sound".  The way a PZM works is that sound from all directions is reflected off the plate into the mic.  It doesn't matter which way the mic is pointing, in fact the whole point of them is that they can pick up a natural sound from all directions, without the echo you would get from a conventional mic.  The bigger the plate the better, which is why they are often fixed to a wall or placed on the floor/stage.  Fitted internally, without the metal plate, the body of the melodeon acts as the plate, although with the sound source being so close I doubt it makes a difference

That's what I'm getting at.  The gap between the flat plate and the capsule is critical to guaranteeing the even pick up.  To work as a PZM, I think you would have to mount the capsule on the inside of the back plate (the ones with the holes in to let the sound out) with the capsule (and gap) pointing at the back plate, not at the reeds.  That should then give you even coverage from all the reeds.  since the sound level inside the back of the box is going to be quite high, you might want to look at powering with something at a higher voltage than 1.5 volts.  I recall engineers using 6 volt sources to improve the headroom, and there is a mod floating around the internet to phantom power them, though it is not for the faint hearted.
Logged

Andy Cutting

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
    • Andy Cutting
Re: PZM for the bass end - how does it work?
« Reply #8 on: October 20, 2008, 08:26:28 AM »

Just to add. I use the pzm because the capsule is rated down to 20hz unlike most little mics. So the bass end sound is natural and doesn't need any false bass EQ'd on which in my view sound daft. I do not use it as a reflection mic. The mic is mounted with the capsule directly over one of the sound holes on the bass end. I hope that helps?
Logged
Play the same but better.

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: PZM for the bass end - how does it work?
« Reply #9 on: October 20, 2008, 11:25:39 AM »

Quote
. . .  since the sound level inside the back of the box is going to be quite high, you might want to look at powering with something at a higher voltage than 1.5 volts.  I recall engineers using 6 volt sources to improve the headroom, and there is a mod floating around the internet to phantom power them, though it is not for the faint hearted.
This may well be that mod.
« Last Edit: October 20, 2008, 11:27:46 AM by Bill Young »
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: PZM for the bass end - how does it work?
« Reply #10 on: October 20, 2008, 11:38:07 AM »

Actually no!  Though this one is pretty comprehensive.  I'll see if I can find the other one on my system.
Logged

Paul Young

  • Good talker
  • **
  • Offline Offline
  • Posts: 72
    • paulyoungfolk.co.uk
Re: PZM for the bass end - how does it work?
« Reply #11 on: November 04, 2008, 11:01:33 AM »

Thanks very much for all this discussion.

I've got my PZM now and have been using it, as Andy said, just pointing in through a hole on the bass plate. This may mean it isn't functioning properly as a PZM, but it certainly sounds very good and makes it very easy to use (I've put velcro on the underside of the mic and a little piece on my box, so it just sticks on and pulls off).

I was going to try experimenting with placing it inside in all the various ways suggested, but having removed my bass plate I've found that there isn't actually much space in there! It's a Saltarelle Pastourelle 2, which I chose because it was the most compact 2 and a half row I could find, and the levers really are packed in tight. There might be a space for the PZM at the very top or bottom of the bass plate, and I may get round to doing some experimenting one day, but then again since I'm very happy with how it sounds just velcro'd onto the outside pointing through a hole I may just be lazy and stick with that. Plus this way has the advantage that if I take a second box on stage, I only need to splash out on an extra strip of velcro, rather than on another PZM.

Having decided I like the simple option though, that phantom power mod is certainly quite appealing - mainly because I'm rubbish at remembering to turn the mic off when I've finished playing and so I get through a lot of batteries. A couple of my friends are electronics students. Might see if they'll sort it out for me for a couple of drinks.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal