Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5   Go Down

Author Topic: Is it just me...?  (Read 19333 times)

0 Members and 1 Guest are viewing this topic.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Is it just me...?
« Reply #40 on: May 31, 2012, 04:29:56 PM »

If someone put a new box on the market with noisy actions, buttons that disappear down the keyboard holes, reeds that are prone to breakage or poorly designed springs that also break easily they'd be crucified.

That's exactly the point, Hohners have been around forever, they are not a new design!

As for the statements about reeds and springs, I have never had these issues with old or new Hohners.

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Is it just me...?
« Reply #41 on: May 31, 2012, 05:00:02 PM »

The fact that they're not a new design and have been around forever doesn't change the fact that they have major flaws that people wouldn't stand for in a new box. DDR abortions of days gone by don't get a free pass on criticism, what makes Hohners exempt?...."Hohner Goggles" perhaps?. ;D

...and you might have not had issues with the reeds and springs on Hohners but a lot of people have...
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Is it just me...?
« Reply #42 on: May 31, 2012, 05:16:24 PM »

The fact that they're not a new design and have been around forever doesn't change the fact that they have major flaws that people wouldn't stand for in a new box. DDR abortions of days gone by don't get a free pass on criticism, what makes Hohners exempt?...."Hohner Goggles" perhaps?. ;D

...and you might have not had issues with the reeds and springs on Hohners but a lot of people have...

Tell you what Andy, the Hohner Liberation Front will allow you to like what ever melodeons float your boat and but you must let us HLF members like and promote Hohners  (:)

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Is it just me...?
« Reply #43 on: May 31, 2012, 05:16:38 PM »

Well, look at it from the other end.

They have been probably THE dominant player in the melodeon field for over eighty years. The 2915 series, warts and all, first produced in 1930s (?) is still selling, still in demand, still supported.

The vast majority of Hohner box owners - who most likely are not on here - had a free choice about that they bought, I expect some even had friends to ask, they could have bought cheaper, they could have bought dearer, Hohner are still going strong.

So it takes very simple logic to say they must be doing something right.

Just because nous ne savons pas quite what the particular je ne sais quoi is, it is clearly there.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Is it just me...?
« Reply #44 on: May 31, 2012, 05:33:30 PM »

Well, look at it from the other end.
They have been probably THE dominant player in the melodeon field for over eighty years. The 2915 series, warts and all, first produced in 1930s (?) is still selling, still in demand, still supported.

Has ANYONE else used the same parts (or the same size parts) for ANY one box for such a length of time? , the fact that you can buy a 2x15 which is 80 years old and get almost evey part for it (and a load of parts for other less common boxes which shared parts) has to be pretty unique - also you can buy every part of a Pokerwork off the shelf in the UK including the casings and build one as a KIT !! (though it`d cost a Fortune) - I don`t know how willing other makers are about selling parts even let alone to such a degree as Hohner...

I agree with the Naysayers to a degree, they are relatively built like crap, I had a shock when I got my Pokerwork and saw how cheaply made and cost-cutting it was compared to the Delicia Popular..... I then thought , must be the Chinese ones - Nope, got a 1950s German 1040 1 Row and its made Just the same from the same bits, worse in fact in one way that it`s not got felted pallets like the Chinese PW has...   but the SOUND , Oh the sound..

The Club 3B/S is far better made (30s/40s) as is the Atlantic (70s) but these were hi-end instruments of their days and even then the build of even cheaper Italian stuff is more refined and the fittings better quality
« Last Edit: May 31, 2012, 05:38:01 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Is it just me...?
« Reply #45 on: May 31, 2012, 05:36:39 PM »

To clarify again, I like Hohners. If I didn't then I wouldn't have bought, (IIRC), 9 of them.

My issue is with the double standards and reverse snobbery...
« Last Edit: May 31, 2012, 05:41:02 PM by Andy Simpson »
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Is it just me...?
« Reply #46 on: May 31, 2012, 06:03:16 PM »

The business success of a company is not always a consequence of the quality of their products. Microsoft anyone?

Hohner has been, & continues to be, completely dominant in the area of DBAs. I'm not sure that this is because their product is so great, but rather because, years ago, they somehow managed to completely dominate & control the market. With that domination came economies of scale that may have prevented any other company from effectively competing. The Pokerwork/Erica line is a flawed design that has barely been updated or improved in 50 years. Not updating the design over the years presumably has allowed Hohner to further reduce their production costs & increase their profitability. The only likely competition now would have to come from a Chinese manufactured product, but maybe demand isn't great enough to spur anyone to try to go head-to-head with a company as established as Hohner.

All that having been said, the Hohner sound is a distinctive & appealing sound which is enough to persuade some people to spend a lot of time & trouble doing the things to their Hohner boxes that Hohner could/should have done to them in the initial manufacturing process. Of course, Hohner actually HAS improved their basic Pokerwork design - with the fairly recent introduction of the Morgane/Merlin/Galaad line. These boxes ARE a reasonable, cheaply-produced alternative to the more hand-built Italian boxes.

Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

waldoB

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: Is it just me...?
« Reply #47 on: May 31, 2012, 06:06:35 PM »

Over the last couple of years I've seen two long time knowledgeable and entertaining members cease contributing after a lengthy series of acerbic comments were made about instruments they owned, and enjoyed. The spirit of this forum normally is positive and friendly, which must be one reason why it is successful.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Is it just me...?
« Reply #48 on: May 31, 2012, 06:28:00 PM »

You can't generalize too much, can you.
The good Hohners of the 40s and 50s have a unique and lovely sound and are good reliable boxes.
Same for the good Pokerworks.

Key noise can be reduced by suitable surgery and I believe this is worth doing. They are "part of the sound" but you can have too much of a good (?) thing...

And there's nothing like a pokerwork for paint jobs, lowered action, performance and comfort tweaks and all the rest of that "boy racer" customization. Like certain cars, it's the classic chassis for modding.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Is it just me...?
« Reply #49 on: May 31, 2012, 06:38:05 PM »

And there's nothing like a pokerwork for paint jobs, lowered action, performance and comfort tweaks and all the rest of that "boy racer" customization. Like certain cars, it's the classic chassis for modding.
Absolutely! And as Adam-T mentioned, we can literally build a Pokerwork from new spares. How about that for product support!

Yes, one can be shocked when looking inside a box, finding out how some parts were roughly made or assembled, but the whole thing works and sounds great! And is very easy to repair, customize or improve.

We Hohner-o-philes do not deny the fact that there are lots of very nice boxes out there, but nothing plays or sounds like a 2x15-series Hohner!

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Is it just me...?
« Reply #50 on: June 01, 2012, 01:42:03 AM »

Love the sound of your Preciosa. The pitch of my old 12 bass Hohner also "bends" depending on how much pressure you apply - it makes it sound very much like a harmonica at times. It definitely gives it "character"!

Cheers - yes, I think that's right. The pitch bending is what makes it sound so great as a solo instrument; I think if I ever "fixed" that it would be far less fun to play solo.

Agreed. I find this with mine and it is probably the single thing that I love most about the instrument. My only criticism is that it doesn't work very well in a dry room, really needs a spot of reverb to sound its best.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is it just me...?
« Reply #51 on: June 01, 2012, 06:02:40 AM »

If someone put a new box on the market with noisy actions, buttons that disappear down the keyboard holes, reeds that are prone to breakage or poorly designed springs that also break easily

I wonder, is the disappearing button syndrome a relatively recent (in terms of Hohner history) phenomenon?  My two Ericas, both bought new in the 70s, with plastic keyboards did it - the slightly earlier red one in particular to such an extent that it became quite uncomfortable to play for any length of time and led to the first modification I ever did to a box (a chunk of foam under the levers - crude but reasonably effective!). But I don't seem to have the problem on the old wooden-fingerboard "Unpokerwork". Are the holes a closer fit on the wooden fingerboards so that the ends of your fingers automatically limit the button travel, or is it just that you don't notice it because the wooden fingerboard lacks the sharp edges of the plastic ones? Or were the older actions more carefully assembled? Or is there some other factor at work?
Incidentally, in 30-odd years and about a dozen Hohners I have had one spring go and never had a broken reed. I know I'm probably lucky and that others have had a number of problems in these areas, but there you are. 

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Is it just me...?
« Reply #52 on: June 01, 2012, 07:09:15 AM »

My 1950s 1040 1 row does it.... the Club-3BS doesn`t but then it`s at the other end of the scale price wise and about 15-20 years older ....

the daft part is that Hohner never did anything about it in at least 60 years, made no effort to reduce it even - and I thought camera makers were bad for repeating stupid mistakes ! ..whatever, I`m glad the boxes are still made and still pretty much exactly the same (unlike the Atlantic IV "Re-Issue" which is only an Atlantic in name and similar-ish appearance and is a totally different box construction wise) ..

I for one don`t mind the plastic fingerboard, it`s durable and won`t crack between the holes, I`ll have to get around to doing the mod though, I didn`t know it came in as early as the 70s (you learn something every day), I`d have guessed it was a 90s introduction but then the Hohner Button boxes I`ve experienced so far have either been up to the late 60s or nearly new. Did the Corsos move from the wood'n'bogseat to plastic at the same time?
« Last Edit: June 01, 2012, 07:22:04 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Is it just me...?
« Reply #53 on: June 01, 2012, 08:50:38 AM »

Are the holes a closer fit on the wooden fingerboards so that the ends of your fingers automatically limit the button travel, or is it just that you don't notice it because the wooden fingerboard lacks the sharp edges of the plastic ones? Or were the older actions more carefully assembled? Or is there some other factor at work?
Graham

Quick check -
 - 1940s (?) Erika. Buttons don't go quite as far below the keyboard (fingerboard not so deep internally or maybe thicker due to wooden construction?). Edges of holes less noticeable.
 - Plastic kbd Erica - keys depress further, haven't measured but noticeable to the touch, also edges of holes feel sharper.
 - Chinese toy - buttons don't go very deep because they bottom out in the much thinner fingerboard. Design feature or just how it happened?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is it just me...?
« Reply #54 on: June 01, 2012, 12:13:03 PM »

the Club-3BS doesn`t but then it`s at the other end of the scale price wise and about 15-20 years older

If it's like my old Club II with a three-piece fingerboard, it will have a felt-topped bar under the levers to limit movement.  So they were aware of the problem donkey's years ago, but chose to address it only on the upper-end button boxes. (At least, I assume the bar is original - it certainly looks contemporary with the rest of the box).

Graham

Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Is it just me...?
« Reply #55 on: June 01, 2012, 12:32:22 PM »

Over the last couple of years I've seen two long time knowledgeable and entertaining members cease contributing after a lengthy series of acerbic comments were made about instruments they owned, and enjoyed. The spirit of this forum normally is positive and friendly, which must be one reason why it is successful.

I'm with you.  Each to their own, that's why we have such a rich and varied tradition.

I love all of my Hohners (7 of 'em) for different reasons (they all sound and play differently!).  I love my Dino Black pearl II which is different again. My Dino Oakwood Special is my pride and joy, and different from all the others. I'm not keen on Castagnaris, Salterelles etc, and prefer my Hohners and Dinos, that's my own preference, can understand why others love them.

So let's stop dissing each others boxes!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Is it just me...?
« Reply #56 on: June 01, 2012, 12:42:39 PM »

[[[ With my admin hat on, I don't think there's anything particularly contentious in this thread is there? Certainly nothing I've come remotely close to vetoing, and I'm not shy about doing that sort of thing. Just a bit of interesting discussions about older Hohners, their pluses and minuses. If there's anything people find offensive, simply use the report link so I can take a look; might do something about it, might not, but I'd always prefer to know what's going on -- Clive ]]]

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Is it just me...?
« Reply #57 on: June 01, 2012, 01:04:56 PM »

Quote
If it's like my old Club II with a three-piece fingerboard, it will have a felt-topped bar under the levers to limit movement.  So they were aware of the problem donkey's years ago, but chose to address it only on the upper-end button boxes. (At least, I assume the bar is original - it certainly looks contemporary with the rest of the box).

there`s certainly felt topped somethings under the levers , some celluloid too (weird), the stop-levers are under the fingerboard on this model so the underside doesn`t come off . yoiu can also see how it could have been a 3 row with a few more buttons and pallets. the inner row are muffled compared to the rest due to the 3 tier design compared the later densely packed 2 tier design of the Corona-IIIs

« Last Edit: June 01, 2012, 01:09:38 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
Re: Is it just me...?
« Reply #58 on: June 01, 2012, 02:02:13 PM »

I normally use my Hohner pressed wood for morris but take the Saltarelle Nuage if the weather is cold and wet.

That is how I value my instruments.

Cheers,

Sandy

Hooray for Hohners  (:)





AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Is it just me...?
« Reply #59 on: June 01, 2012, 02:16:49 PM »

Quote
So let's stop dissing each others boxes!

I agree with Clive - I don't see anything particularly contentious about this discussion. And I don't think it's a question of dissing others boxes, as practically everyone here owns or has owned Hohners.

Hohner seems to have a somewhat unique position if the DBA market: somehow or other (perhaps because their designs were actually superior in the first decades on the 20th century) Hohner came to completely dominate the market for DBAs - if you look at Ebay it would appear that at least 90% of the vintage boxes out there are Hohners of one type or another. Having successfully secured a quasi-monopoly, like some other big corporations in the same position,  Hohner just sat back & coasted. They chose, over a period of 60 + years not to fix what most people see as a "flaw" in the design of their biggest-selling boxes - disappearing buttons & inadequately cushioned palettes - a fix that would have cost practically nothing to address. Most inexcusable of all is their decision to start putting the most pathetic bellows tape imaginable on their low-end boxes.

However, none of this criticism means I don't enjoy the sound of a well-tuned vintage Hohner box ...   (:)

Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.
Pages: 1 2 [3] 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal