Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: cracks in bass soundboard  (Read 3121 times)

0 Members and 1 Guest are viewing this topic.

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
cracks in bass soundboard
« on: May 29, 2012, 10:27:51 AM »

Yesterday i went to my local accordionshop wich is closing down. In the workshop stood a three row melodeon, i asked about it and the owner told me some old men came by with it years ago, but he never heard from him since and hes probably dead. "its yours for 200kr" and since i had EXACT 200 in my pocket i could not resist.
http://s18.photobucket.com/albums/b104/mullvaden/treradigt/ Check pics here.
Never seen any other melodeon like this, unisonic bass, with both major and minor chords. tuned GCF.
This is a true project box but i think its possible to fix, there are some things wich have to be glued and so on.
The major problem is cracks in the bass soundboard, its just under the bass reeds, some previous owner had try to fix this with pvc but its not got in any way. There are several alternatives how to fix this and i ask you fellow addicts about your opinion.
1. make new soundboard
2. scrape off old glue, put new glue.
3. cut out the part with holes and replace just that piece, fix the small cracks with spackling paste (the man at store thought i should fix everything with spackling paste)

I also thinking about, this reedbank is not so stable, shall i build a new one?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: cracks in bass soundboard
« Reply #1 on: May 29, 2012, 10:34:38 AM »

Sometimes you can repair cracks along the grain by smoothing out the crack by passing abrasive paper through the crack, then glue in a piece of veneer. I have used this method often on concertinas with cracks in the action board. Photos here
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: cracks in bass soundboard
« Reply #2 on: May 29, 2012, 10:48:02 AM »

would I be correct to assume that this bass reed block was originally fixed to the fondo, and only the cord reed block was removable? ???
Logged
Jack Murphy    beyond the black stump

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: cracks in bass soundboard
« Reply #3 on: May 29, 2012, 10:51:10 AM »

is that 200KR as in Swedish Krona , if it is (about £20 in UK) , it`s a bargain of a fixer box with lots of scope.. as Old Geezer noticed, the Bass reedblock looks like it was originally glued to the soundboard, it looks like its been ripped off hence the damage to the soundboard itself - whatever needs doing, needs doing to both the reedblock and soundboard.  hmmm
« Last Edit: May 29, 2012, 10:55:01 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: cracks in bass soundboard
« Reply #4 on: May 29, 2012, 02:11:45 PM »

I dont think it has been glued cause the other reed block was kept in place by a screw-hook (english word?) and there is a hole beside bassblock also, wich has caused one of the smaller cracks. The wrecked part looks like a result of prevoius repairs.

Gonna try the veener where its possible, i dont think it will work between the holes.

Other things to fix:glue bellow to frame, re-glue corner, seal corner, new bellow gaskets,adjusting pallets,


And yes, 200 swedish kronor  :D 
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: cracks in bass soundboard
« Reply #5 on: May 29, 2012, 03:14:51 PM »

I dont think it has been glued cause the other reed block was kept in place by a screw-hook

It`s quite common to have one reedblock glued in permanently when the other is removable. don`t ask me why but I`ve seen it a lot in the bass ends
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: cracks in bass soundboard
« Reply #6 on: May 29, 2012, 04:01:57 PM »

Gonna try the veener where its possible, i dont think it will work between the holes.

I succeeded in filling big gaps like the ones we see in picture #8 by using a mix of epoxy and sawdust. I put a piece of gaffers tape under the board,  I make cylinders out of thick paper that I insert into the holes, then fill the gap with the epoxy-sawdust mix making sure there is slightly more than needed to fill the gap. When the epoxy is set we can then rip the paper fillers, then file and sand the epoxy to obtain the desired shape.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: cracks in bass soundboard
« Reply #7 on: May 29, 2012, 04:36:17 PM »

Gonna try the veener where its possible, i dont think it will work between the holes.

I succeeded in filling big gaps like the ones we see in picture #8 by using a mix of epoxy and sawdust. I put a piece of gaffers tape under the board,  I make cylinders out of thick paper that I insert into the holes, then fill the gap with the epoxy-sawdust mix making sure there is slightly more than needed to fill the gap. When the epoxy is set we can then rip the paper fillers, then file and sand the epoxy to obtain the desired shape.

That sounds like a lot of work.  The veneer method is much cleaner, and fills the gaps with real wood!

It works between the holes with concertinas!   Two tips - 1) clamp the board to something flat while the glue sets 2) leave excess veneer sticking out and clean up when the glue is dry with a very sharp chisel, or knife.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: cracks in bass soundboard
« Reply #8 on: May 29, 2012, 04:57:01 PM »

That sounds like a lot of work.  The veneer method is much cleaner, and fills the gaps with real wood!

It works between the holes with concertinas!   Two tips - 1) clamp the board to something flat while the glue sets 2) leave excess veneer sticking out and clean up when the glue is dry with a very sharp chisel, or knife.

Veneer indeed works well with narrow cracks, but how do you deal with "missing" wood like on picture #8?
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: cracks in bass soundboard
« Reply #9 on: May 29, 2012, 04:58:41 PM »

Just use a bigger piece of wood!  Certainly wouldn't use filler.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: cracks in bass soundboard
« Reply #10 on: June 09, 2012, 07:09:22 AM »

Seen a lot of old accordions with glued down bass blocks, many pre 1940s Hohner compact piano boxes sport these. It may have served to gain a bit of clearance , and served to reduce the size of the instrument. It may have been a theory regarding resonance. A Gurrini I rebuilt did not have enough clearance inside to allow a bass plate to be installed on a bass block so it could be removable, hense my first theory.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: cracks in bass soundboard
« Reply #11 on: June 09, 2012, 09:22:17 PM »

Have discussed this with my father, who is into violin reparis, he think best solution is to replace the damaged parts with new wood, much better than use filler, probably less work too. the important thing is that its airtight between the holes.
my vaccation starts soon so i start witt this. keep this thread updated about the progress (or failure)  ::)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal