Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Newbie Reed not working question  (Read 3380 times)

0 Members and 1 Guest are viewing this topic.

SteveS

  • Guest
Newbie Reed not working question
« on: October 07, 2008, 12:53:29 AM »

Hi guys,
I just found your forum since a neighbor just gave me a Hohner accordion.
I fixed a couple of problems already...one where a reed was stuck on whether you pressed a key or not.
There are also some other keys that just don't work or are very quiet compared to the others.
I took it apart and looked, blew, poked, etc., but don't see anything that is keeping it from vibrating.
Any ideas?

Steve
Logged

henrikfan

  • Member
  • *
  • Offline Offline
  • Posts: 17
    • Elizabeth Brodie-home
Re: Newbie Reed not working question
« Reply #1 on: October 25, 2008, 09:31:18 AM »

Hello

    Am not experienced enough with repairing to suggest what the problem with the instrument might be, as it may be any one of several things, but if you search the forum for reed related posts/problems, there's bound to be something that will cover your question.  I am fairly new to this forum and have almost always found a post that covered matters to do with repair and restoration (see Tallship's post on Hohner refurbishing).  Just make time to read the posts and follow threads.  I'm guessing you haven't had any replies to your post as your question wasn't specific enough, and any suggestions would be guess work.  Good luck with your repair.

Henrikfan
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Newbie Reed not working question
« Reply #2 on: October 26, 2008, 05:51:40 PM »

I'm guessing you haven't had any replies to your post as your question wasn't specific enough, and any suggestions would be guess work.
Indeed so. There are many reasons why a reed might sound weakly or not at all, some are simple to find and fix while others are much more difficult to diagnose and correct. I'm only just starting to feel my way around reed work by trial and error, the latter being more frequent than I would like!

Pictures and sound files together with a detailed description might allow the more experienced repairers to recognise the faults and possibly suggest a course of action. I wouldn't even try because a stab in the dark seldom finds its target.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Newbie Reed not working question
« Reply #3 on: October 26, 2008, 06:58:40 PM »

  I'm guessing you haven't had any replies to your post as your question wasn't specific enough, and any suggestions would be guess work.  Good luck with your repair.

That's right,  its a bit like phoning a car repairer and saying "my car is broken down, can you tell me how to fix it please?"  There are several possible reasons, but the basic things to check are;  is the air able to reach the reed?  is there something physical obstructing the reed?  is the air able to escape and avoid going through the reed?  In general terms that is about it. Good luck. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Newbie Reed not working question
« Reply #4 on: October 28, 2008, 02:28:00 PM »

  Any ideas?
Steve

     As others have said, this is a pretty nebulous topic but -- as long as you're basically looking around -- I'd suggest taking off the grille (a couple of screws ... don't lose them, they have to be special ordered from Ireland).  Press each button and see if the valve is raising off the flat plate with the holes in the same amount for all the notes.  Especially, look to see if there's any difference with the one's that don't sound/sound weakly.  This is a pretty easy visual check.

     One thing that restricts reeds is obstructions (I once was confounded for an afternoon of looking at why a note wouldn't sound -- then I finally noticed a single hair that had been pulled into the reed -- stopped it totally dead; removing the hair fixed it immediately).  These obstructions can be something like that or dust and other airborne stuff (smokey locations like pub parlors have been known to wreck boxes) or parts of the melodeon itself (fluff off the cloth under the grille or bits of reed wax, etc.)  Another thing that can cause problems is the set of the reed in it's slot.  One of the local squeezers (a bit of a D-I-Y guy anyway) would take his Hohner apart every six months or so and run a very thing "car ignition points feeler guage" along the sides of each of the reeds. If the reed has been misplaced and it's rubbing to the side of the slot, it will dampen it. But be very careful not to dislodge or in any way damage the plastic or leather valve strip that runs along most of the reeds (the very tiny ones won't have one -- that's OK, that's how they're built).  If it's just dirt and grunge and sticky stuff, that's a problem because reeds are tricky to clean -- they're just so small and hard to get to. 

    Another issue with the reeds is the set of the bend.  The tip of the reed is very critical as to where it sits compared to the flat surface of the plate that it's riveted to.  This is another place that the feeler guage is useful - try to slide it flat along the reed carrier; on many melodeons, it should just slide under the tip of the reed without moving it.  This indicates that the tip of the reed is sitting just above the level of the reed plate.  As with the lever pallets, if you have one or more that are different from the others, they may be your problem reeds.

    And, on a general note, you'll notice that half the reeds are inside the reed block.  Yeah, it's very hard to get to those to inspect them do what you can.  And finally, it's usually not a good idea to blow on reeds; the moisture in your breath is very likely to cause rust to form on them.  Oh, and the feeler guage that I mentioned above should be the thinnest one in the set -- about .001" (one thousandth of an inch).

    My overall advice is to carefully inspect the pieces.  Very subtle changes in the operation or location of the items inside (the working parts and the reeds) will make a big difference in how they sound.

    Sorry it can't be more precise than that but it's a big subject.  And you may want to think about the idea of getting it to a specialist repairer, although the cost usually isn't worth it for "boxes that have been in somebody's closet for years".

Good luck,  BH NC USA
Logged
I love one-rows!  Four reeds kick butt!!!!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal