Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: HA-114 screws  (Read 3825 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
HA-114 screws
« on: June 25, 2012, 02:04:00 AM »

I have 2 hohners (both HA-114), an older made in Germany 'G' and a newer one 'C' that the box says made in Germany but it doesn't say it on the underside of the button box.

On the grills for them the older one has the grill secured with tiny screws and on the newer one the look like nails. On the newer one some of the nails are lifting slightly so I would like to replace with screws. The question is what size are they?

Stephen

Just bought a 2915 today on eBay for US$290 so that makes 3 in a matter of 3 months. I need to slow down my buying and speed up my playing... The good thing is that my wife picked it up today and after looking at my button number notes was able to rattle of 'You are my sunshine'. I was very proud of her.

« Last Edit: June 25, 2012, 03:18:43 AM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: HA-114 screws
« Reply #1 on: June 25, 2012, 03:31:57 AM »

On the grills for them the older one has the grill secured with tiny screws and on the newer one the look like nails. On the newer one some of the nails are lifting slightly so I would like to replace with screws. The question is what size are they?

the original were nails with a slot cut into the head to imitate a screw to hold the grill to the 2 wooden edges,
 before being screwed to the pallet fondo

when any require replacement, I cut a gold dressmakers pin (on an angle) to length and hammer home  (:)
Logged
Jack Murphy    beyond the black stump

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA-114 screws
« Reply #2 on: June 25, 2012, 04:44:06 AM »

Definitely screws!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: HA-114 screws
« Reply #3 on: June 25, 2012, 07:01:51 AM »

I have 2 hohners (both HA-114), an older made in Germany 'G' and a newer one 'C' that the box says made in Germany but it doesn't say it on the underside of the button box.

On the grills for them the older one has the grill secured with tiny screws and on the newer one the look like nails. On the newer one some of the nails are lifting slightly so I would like to replace with screws. The question is what size are they?

Stephen


Mine is a 16-fold 114C Made in Germany but with a plastic fingerboard. The metal grille is held on to the wooden sides by small flathead nails, which, as they cannot be countersunk, stand proud of the metal. That makes them look as if they're coming out, but in my case, that's not so. Personally I don't think you've got anything to worry about.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA-114 screws
« Reply #4 on: June 25, 2012, 07:43:32 AM »

A photo would clarify the problem.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: HA-114 screws
« Reply #5 on: June 25, 2012, 08:36:44 AM »

Definitely screws!

I stand corrected

I have several HA114's with the silver ends and one with black ends and it appears that these all have nails securing the grill to the wood ends.

Is the screw version unique to the gold end version, or has screws been retro fitted by a previous owner?
Logged
Jack Murphy    beyond the black stump

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA-114 screws
« Reply #6 on: June 25, 2012, 08:45:48 AM »

The normal setup is the metal grill is secured to the small upright wooden end pieces by nails, and each end there is a bracket the holds the whole grill in place.  Each of those brackets is secured by a small round head screw.  These are often replaced by nails because the correct screws are almost impossible to obtain.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA-114 screws
« Reply #7 on: June 26, 2012, 03:53:16 AM »

I have ordered a packet of #0 x 3/8" and a packet of #1 x 3/8" from a store here in the USA. I will let you know if they are the right type.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA-114 screws
« Reply #8 on: June 26, 2012, 08:02:28 AM »

I have ordered a packet of #0 x 3/8" and a packet of #1 x 3/8" from a store here in the USA. I will let you know if they are the right type.

You are fortunate to find those,  in the UK it's almost impossible to find such small screws.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: HA-114 screws
« Reply #9 on: June 26, 2012, 08:58:55 AM »

I have ordered a packet of #0 x 3/8" and a packet of #1 x 3/8" from a store here in the USA. I will let you know if they are the right type.

You are fortunate to find those,  in the UK it's almost impossible to find such small screws.

The only places I've had any luck in finding new miniature screws of that size in the UK, in sensible small-ish quantities, are a few specialist model shops (both aircraft and marine) and online suppliers (e.g. modelfixings.co.uk). The downside is that the type and material range is very limited, as most are steel self-tappers with Phillips heads. Slotted heads are as scarce as hens' teeth. Small brass screws,  when found, are best for "fitting and forgetting", as they are so soft that they will readily shear off on dismantling or reassembly.

Such outlets are also a source for Hohner-style miniature bellows pin washers.
Logged

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: HA-114 screws
« Reply #10 on: June 26, 2012, 09:56:16 AM »

I can recommend A.G.Thomas (Horology and Jewellery Suppliers) as source for small screws and other fittings.

http://www.agthomas.co.uk/

Logged
Semper idem, sed non eodem modo

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA-114 screws
« Reply #11 on: June 26, 2012, 05:58:03 PM »

I ordered RWB0006 and RWB0106 from Micro Fasteners (Packet of 100) for $4.50 a packet. shipping was an extra $4
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA-114 screws
« Reply #12 on: July 01, 2012, 05:38:59 AM »

Screws came today and the size #0 are perfect for the grill. I have lots left (:)
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal