Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: modifications to a hohner erica  (Read 9229 times)

0 Members and 1 Guest are viewing this topic.

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
modifications to a hohner erica
« on: October 15, 2008, 05:39:18 PM »

Hey guys,
I wanted to know what mods I could do to get the best from a hohner erica. I heard Derek Hickey play one with the band De Danann a few years ago and the thing was singing! I recently picked up a nice old erica in pretty good condition and was hoping I could do the same. I suppose Im looking to see what the experts might do to improve every aspect of the melodeon..ps I wouldnt mind spending a good few quid on it if it was worth it! Thanks for your advice and help,
Boxlad
Logged

pipives

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 275
    • Pip Ives
Re: modifications to a hohner erica
« Reply #1 on: October 15, 2008, 07:47:03 PM »

Well, I've got 2 Ericas. A C#/D and a D/G.

I've made the D/G a fourth button start giving me low notes and accidentals. It's dry tuned (but this depends on your preference) and bushed the bass buttons so they don't rattle.

Both boxes have Italian reeds in them in both sides. The grilles were looking tatty so I found some metal restorer ffor them that has bought them back to life. I also change the white material behind both ends for black.
Both boxes have the button travel limited so the buttons only go flat with the fingerboard and not right into the holes.

Many people have played these since I did the improvements and have been impressed with them. I hope my two will play for many years yet.

Just need to bush the bass buttons on the C#/D when I get time!
Logged
Faversham, Kent

finnhorse

  • Guest
Re: modifications to a hohner erica
« Reply #2 on: October 15, 2008, 09:13:49 PM »

If you purchased it used, make sure the gaskets are well sealed.  That's an easy fix.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: modifications to a hohner erica
« Reply #3 on: October 15, 2008, 09:24:03 PM »

I guess it's nice to have a "riced up" box, but even in its original form the Erica can perform well if there is no bellows leak, and if all the reeds, keys and flappers work well. The player has lots to do with how a box sounds in the first place :) unless the box has serious defects.

It's easy to get to pay too much attention to the equipment we use and not enough to our playing skills!

Enjoy.
« Last Edit: October 15, 2008, 09:29:04 PM by québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: modifications to a hohner erica
« Reply #4 on: October 15, 2008, 10:15:48 PM »

I heard Derek Hickey play one with the band De Danann a few years ago and the thing was singing!

Yep - this is the sort of thing on these two clips. Notwithstanding the skills of the player, it shows that with a little fettling, a Hohner Erica really comes alive... arguably better than some rather more expensive toys I could think of... seriously... 8)

Regarding aesthetics, here's a neat little video on tidying up the rough edges of the Corona (Erica's big brother) - blackening the cut edges of leather and wood (personally I'd use leather dye or paint for durability), and (like Pip's done) showing how the grille design looks much nicer if you change it to a black grille cloth.

Black bellow tape looks better too - older Ericas are like this anyhow, newer ones are often worth redoing, especially if they have that really horrid cheap brittle gold paper tape that they went over to using in the 80s. Quite silly that - considering the rest of the bellows are quite well made, and considering they continued to use tough ribbed bellows tape on Coronas (and still do)... ::)

Ed J
« Last Edit: October 15, 2008, 10:20:13 PM by EeeJay »
Logged

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: modifications to a hohner erica
« Reply #5 on: October 16, 2008, 01:31:05 AM »

... The grilles were looking tatty so I found some metal restorer for them that has bought them back to life.
...Just need to bush the bass buttons on the C#/D when I get time!

May I ask what you used on the grille?

Any chance of pix of the bushings an the method you used please?
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

finnhorse

  • Guest
Re: modifications to a hohner erica
« Reply #6 on: October 16, 2008, 01:50:21 AM »

Swapping the grille cloth is a fun way to spruce way up the box's outward appearance, but it also affects the sound.  I know you didn't ask about cosmetics, but I'm pretty particular so I had to change mine..

Hohner applied such thin cloth behind the grille for two reasons. 1) it's dirt cheap and 2) heavy material will act as a baffle.

It won't affect how the box is played, but it seriously affects the sound (more than you'd expect it to).  I switched the backing on my Pokerwork.  I was surprised by how much various materials would take the "edge" off the sound.  If you have nice reeds in your box (I don't  :)), this might be something that would concern you. (If you don't care about looks then the factory cloth is probably ideal..)   The material I decided to use is both more attractive than the Hohner stuff and permits the tone to be almost identical with or without the grille.  Another member of this forum recommended mosquito netting.
« Last Edit: October 16, 2008, 01:52:21 AM by finnhorse »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: modifications to a hohner erica
« Reply #7 on: October 16, 2008, 11:56:48 AM »

bushed the bass buttons so they don't rattle.
This is the first thing I want to do to my Erica, I have got some clues from "whatshisnames" Concertine Repair Manual and if Pip tells how he did it. I would be more than happy to photagraphically record the process for everyones edification.

ps I alreday intended to do - How to remove the fingerboard for thumb strap removal & how to restrict button travel.

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: modifications to a hohner erica
« Reply #8 on: October 16, 2008, 12:35:27 PM »

Bear in mind too that every box I've played sounds different when you're not the person playing it.  Yes, the person playing it makes a difference but not being strapped to it does too.
Logged
Ciao Bellow

Darren

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: modifications to a hohner erica
« Reply #9 on: October 16, 2008, 01:49:16 PM »

Ahh.. the joys of a Hohner Erica.

Mine is an old grey one from the days when the electroplating on the grill was thicker than the base metal. No this has not affected its sound or playability in any way, but it's a different grill too. Flush fitting around the edges. Looks tres groovy.

It is just a nicely balanced Box. Light, and with a corrected action, so nice to play, even if it clacks a bit.

Try if you can to get hold of a wooden fingerboard model. This is a sure step in the right direction. Even with this you will have to chock up the levers with a strip of wood, with leather glued on to the top edge. Develop a passion for nice little block planes for this job. Ahh.. such joy. Block planes, french cheese and pretty girls..oh and nice Australian red wine...Rutherglen and cellared for at least a decade.. and an Erica laptop on your knee. Heaven!!

I live in constant dread of a keyboard spring breaking though. Such shame, leaving the session early after finding that you were the one emitting the weird 'wolf' note during the last set of tunes. The tight frowns on flute players faces don't bear thinking about.

But when is a Hohner not a Hohner.... running Italian reeds. Sure its a gamble, and I have heard there are spies about...even in these distant parts...but boy wouldn't I like a little Italian car to race around in too..can't afford one though. It's a good match if you dare. But how would you be all of a sudden becoming, through some wierd and unexpected quirk of fate, a famous Button Accordioneeste, only to hear a teutonic knock upon your front door.......... and the budgie dives for cover......it's all over...moan.moan.whimper.
 
Logged

pipives

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 275
    • Pip Ives
Re: modifications to a hohner erica
« Reply #10 on: October 16, 2008, 02:31:45 PM »

Ahh.. the joys of a Hohner Erica.

But when is a Hohner not a Hohner.... running Italian reeds. Sure its a gamble, and I have heard there are spies about...even in these distant parts...but boy wouldn't I like a little Italian car to race around in too..can't afford one though.
 

Yeah but I'd have kept all the original reeds in it if they were in good condition and I wasn't playing the thing anywhere near as hard as I do. My dad has an erica that has all the mods of mine other than the italian reeds. I love playing it as it's 100% original hohner sound, but I personally prefer mine.
... The grilles were looking tatty so I found some metal restorer for them that has bought them back to life.
...Just need to bush the bass buttons on the C#/D when I get time!

May I ask what you used on the grille?

Any chance of pix of the bushings an the method you used please?

For the grille- It's not perfect, but I put a bit of black material in rather than white (shows up less beer stains!). Then I gave the metal a good but very gentle rub down with VERY light grade wet and dry. Then I sprayed it with a can of Metalicote from b&q. This takes the shine off a little and may be an aquired taste. I'll put some pictures up when I get home. I'm sat at Uni between lectures at th moment!

bushed the bass buttons so they don't rattle.
"whatshisnames" Concertine Repair Manual and if Pip tells how he did it. I would be more than happy to photagraphically record the process for everyones edification.


Hmmmm.... Well I haven't done the best job in the world but it looks ok (ish) and has stopped them rattling. You have to reem out the holes enough to put a bit of bushing felt (same as the concertina stuff) around the hole. This is a job you need to be very brave and very careful for. To do this you need to get the bass buttons out. The easiest way to do this -trick from theo- is to take the rod out frm the mechanism with the button attatched, rather than the whole bass mechanism or just by forcing the button off!
There is a little pin holding each rod in. Un bend that with a pair of pliers (or better) to relase the rod. If you can save the pins then great, if not you should be able to find something small in a hardware shop that would be a suitable replacement when you put them back.

I will photograph and upload a few pics of these bits of my Erica soon. Watch this space..................
Logged
Faversham, Kent

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: modifications to a hohner erica
« Reply #11 on: October 16, 2008, 02:43:18 PM »

What differences are there between an Erica and a Double-Ray (apart from the black button and the swastikas)?

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: modifications to a hohner erica
« Reply #12 on: October 16, 2008, 04:06:58 PM »

What differences are there between an Erica and a Double-Ray (apart from the black button and the swastikas)?
On the Hohner web site the Doubleray is shown as "Erica Doubleray" and apart from the available keys (B/C and C#/D) the specs seem identical! Perhaps the reeds are different?
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: modifications to a hohner erica
« Reply #13 on: October 16, 2008, 11:26:58 PM »

What differences are there between an Erica and a Double-Ray (apart from the black button and the swastikas)?

Back in the 1930s, Erika/Erica was the name of a Club Model box, whilst the 'Double-Ray' Black Dot was a black-painted, wooden, 2-row B/C model made for Forbes of Dundee.

Hohner introduced the "streamlined" 2-row Erica model in 1955, and used the Double-Ray name for it's B/C version, still with the black button marking the middle of the button rows, which originally related to the Forbes tutor book.

So the answer to your question is (apart from the features you mention) "only the B/C tuning!" (They've only produced C#/D Double-Rays since the change to Chinese production.)

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: modifications to a hohner erica
« Reply #14 on: October 17, 2008, 12:09:58 AM »

The material I decided to use is both more attractive than the Hohner stuff and permits the tone to be almost identical with or without the grille.  Another member of this forum recommended mosquito netting.

I fitted some speaker cloth from Maplins to the grille of an Irish Bouebe (the previous owner had ripped out the 'brillo pad' stuff that it came with). Looks good (way better than 'brillo pad' ;D), and doesn't muffle at all...

Bear in mind too that every box I've played sounds different when you're not the person playing it.  Yes, the person playing it makes a difference but not being strapped to it does too.

Oh, too true... a D/G Lilly sounds great to me at 50 paces, but I just can't get on with the sound under my chin. Too shrill, nasal and shouty. Yet I tried one once in G/C and that was just sweet as a nut - felt a lot warmer to my ear close up...

Mindyou, I can still hear those darn Mosquito devices, so have issues with high frequencies... fingernails down blackboards, etc...

Hohner introduced the "streamlined" 2-row Erica model in 1955, and used the Double-Ray name for it's B/C version, still with the black button marking the middle of the button rows, which originally related to the Forbes tutor book.

Yes I recall the Forbes' Tutor being mentioned over at the old board... it's about as relevant today as a Comptometer manual, yet that black button is still there, for all the flaming use it is... ::) surprised it didn't get ditched when the swastikas disappeared...

Ed J
« Last Edit: March 18, 2011, 08:12:53 PM by EeeJay »
Logged

pipives

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 275
    • Pip Ives
Re: modifications to a hohner erica
« Reply #15 on: November 06, 2008, 10:35:46 AM »

Ahh.. the joys of a Hohner Erica.

I will photograph and upload a few pics of these bits of my Erica soon. Watch this space..................

SOrry it's been a while. I tried to put some pictures up while Theo was off building melodeons and it kept telling me the upload thing was full. Then I forgot about it, but now I'm on a reading (alright- drinking) week off uni and thought I put them up. The bass buttons are bushed with black felt- not the neatest job I've done, but it is functional and looks alright unless you're up close.

The grille has it's metal effect/restore spray stuff on it, although since I did it (june/july time) it's had a few knocks and scratches and some rust marks are showing back through.
Logged
Faversham, Kent

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: modifications to a hohner erica
« Reply #16 on: February 12, 2015, 01:20:56 PM »

I have a vague memory of someone saying that to bush the bass buttons you should use a tapered reamer to enlarge the holes as the felt stays in place better in a slightly tapered hole.  Is that correct, or am I getting confused with something else?

As for the grilles, I wonder whether the nickel plating kits would give a good result?

Rob.
Logged

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: modifications to a hohner erica
« Reply #17 on: February 12, 2015, 01:52:36 PM »

Re-nickel plating the grill. I gave a Trichord grill which was pitted and had rust spots, to a local company and it came back in a lovely condition and at a very reasonable price.
 It has a light stippling effect due to them not being able to polish with a machine because of the delicate nature of the grill.
I like it just as much as a smooth polished finish.
Logged
I always respect my elders but they are getting fewer in numbers.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: modifications to a hohner erica
« Reply #18 on: February 12, 2015, 02:01:23 PM »

Re: tapered readers.  The taper is to allow you to get the reamer into the hole!  A parallel reamer of suitable diameter would not be able to enter the hole.  The felt bush has to be be glued in, the taper alone will not hold it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal